Plantronics CA12CD Bedienungsanleitung
Part No. 101987-00 Category Code: 97 Revision: E
Product Summary, CA12CD Cordless
Push-to-Talk Adaptor
2 of 13 pages CA12CD Product Summary Revision: E
1Document Information
This document summarizes features of the CA12CD cordless
push-to-talk headset adaptor. It is intended for customers who
need general information about this product as an aid to their
purchasing and planning decisions. Specific details concerning
installation and use of the CA12CD are available in the CA12CD
User Guide and the Audio-Level Settings Card, both of which are
available online at the Plantronics website.
Portions of this document are based to a large extent on the
Engineering Support Document, “CS50 General Guidelines,”
Revision 1.5, by Steve Cahill.
1.1 Publication History
Revision Date Description
1 27-Mar-06 First release
2 22-Jun-06 Revise
3 20-Jul-06 Charge LEDs were amber
4 9-Aug-06 Add labels to Figure 1
A 2-Oct-06 Production release
B 14-Mar-07 Add CA12CD/A
C 03-Jan-07 Add sections on voice privacy, range
and density, subscription, and audio
performance; delete material
duplicated in user guide
D 7-Jun-11 Update with new logo only
E 16-Dec-11 Revise Figure 1
1.2 Document Approval
Author: Blake Cooper 27 Mar 06
Editor Date
Prepared By: Blake Cooper 27 Mar 06
Engineering Date
Approved By: Mike Erbe 27 Mar 06
Revision: E CA12CD Product Summary 3 of 13 pages
1.3 Table of Contents
Titles Page No.
1Document Information 2
1.1Publication History.......................................................................2
1.2Document Approval.....................................................................2
1.3Table of Contents ..........................................................................3
1.4Table of Figures.............................................................................3
2Product Description 5
2.1Summary of Features....................................................................5
2.2Functional Description .................................................................6
2.3Product Architecture ....................................................................8
2.3.1Base Unit.............................................................................8
2.3.2Remote Unit .......................................................................9
3Audio Performance 9
3.1Sidetone ..........................................................................................9
3.2Interference ..................................................................................10
4Range and User Density 10
5Voice Privacy 12
5.1Frequency Hopping....................................................................12
5.2Encryption....................................................................................12
6Subscription 13
1.4 Table of Figures
Titles Page No.
Figures:
Figure 1: Model CA12CD.........................................................................6
Figure 2: Base-Unit Block Diagram ........................................................8
Figure 3: Remote-Unit Block Diagram...................................................9
4 of 13 pages CA12CD Product Summary Revision: E
Revision: E CA12CD Product Summary 5 of 13 pages
2Product Description
2.1 Summary of Features
Push-to-talk (PTT) switch that is robust and field-proven
Spare battery pack
Two charging wells—one for the remote unit, one for the spare
battery pack
Lithium-ion batteries
Eight hours talk time, minimum
Quick Disconnect™ for compatibility with all Plantronics
H-Series headsets
Receiving coarse- and fine-adjust sensitivity controls
Selectable sending-sensitivity ranges to emulate carbon, electret,
and dynamic mics
Sending-sensitivity fine-adjust control
DECT™ (Digital Enhanced Cordless Telecommunications) radio
operating in the UPCS band (CA12CD) for North-American
applications and full DECT version (CA12CD/A and variants)
for areas such as the European Union and Australia.
Compatible with most air-traffic-control and
public-safety-dispatch voice switches
Ten-foot coiled interface cable with PJ-7 connector (other
connectors available upon request)
LEDs for RF link, PTT, base power, and battery-charging status
Audible indicators for such conditions as out-of-range, low
battery, and sending- and receiving-sensitivity changes
Encryption in compliance with USA regulation
45 CFR 164.312(a)(2)(iv), and therefore compliance with the
Health Insurance Portability and Accountability Act (HIPAA).
6 of 13 pages CA12CD Product Summary Revision: E
Figure 1: Model CA12CD
2.2 Functional Description1
The CA12CD is a cordless push-to-talk (PTT) headset adaptor
made to provide wireless communications and PTT functionality
for Public Safety Dispatch and Air Traffic Control facilities (see
Figure 1). The CA12CD has a Quick Disconnect and is compatible
with all Plantronics H-Series headsets.2The CA12CD consists of a
base unit and a remote unit.
The base has two charging wells, sending- and receiving-sensitivity
controls, status LEDs and a 10-foot coil cord with a PJ-7 connector.
The charging wells accommodate the remote and a spare battery
1Unless otherwise specified, all references to the CA12CD also apply to the CA12CD/A and its
variants.
2Examples of H-Series headsets commonly used in air-traffic control and public-safety dispatch
are the H31 StarSet® and the HW251 SupraPlus®, along with the noise-canceling versions of
these headsets. Binaural versions of some of these headsets are also available. Please see the
Plantronics website for further information.
Console
Interface
Cable
Remote
S
p
are Batter
y
Base
P
J
-7 Connector
Quick
Disconnect
Revision: E CA12CD Product Summary 7 of 13 pages
pack. The LEDs show battery-charge status, power, and PTT status.
The sending controls consist of a configuration switch to emulate
the outputs of different microphone types and a sending-sensitivity
fine-adjust control. The receiving-sensitivity control selects among
four different sensitivity ranges, and the receiving sensitivity can be
fine-tuned by a control on the remote. The console interface cable
connects to the base via a 6-pin modular connector and is typically
wired on the console end with sending on the PJ-7 tips, receiving
on the sleeves, and PTT on the rings. When the user presses the
PTT switch on the remote unit, a relay is closed in the base that
places a short circuit across the PJ-7 rings. This short circuit “keys
up” the communications console to which the CA12CD is
connected and allows the user to transmit over the communications
radio.
The remote unit has a PTT switch, an On-Off switch with
incorporated LED, a metal belt clip, a receiving-sensitivity
fine-adjust control, and a twelve-inch cable terminated in a Quick
Disconnect to which any Plantronics H-Series headset can be
connected.
The On-Off switch enables audio and PTT. As long as the base is
powered up, the RF link is maintained regardless of whether
audio/PTT is enabled. Even when the base is powered down, the
remote will continue to run so that the link can be reestablished
should the base be turned on again. Therefore, to completely
power-down the remote unit, it is necessary to remove the battery.
The CA12CD/A and its variants operate in the European DECT
band of 1880 to 1900 MHz.
The CA12CD for North America also uses DECT technology, but it
operates in the Unlicensed Personal Communications Services
(UPCS) 1920- to 1930-MHz band.
The DECT protocol is used for its power efficiency, which allows
extended operation from a relatively small battery pack. A new,
freshly-charged battery will provide about eight hours of talk time.
8 of 13 pages CA12CD Product Summary Revision: E
2.3 Product Architecture
2.3.1 Base Unit
The block diagram of the Model CA12CD base is shown in Figure
2.
Figure 2: Base-Unit Block Diagram
Revision: E CA12CD Product Summary 9 of 13 pages
2.3.2 Remote Unit
The block diagram of the remote unit is shown in Figure 3.
Figure 3: Remote-Unit Block Diagram
3Audio Performance
The CA12CD audio processing is 32k ADPCM, telephony
bandwidth. A wide range of audio levels can be achieved using the
coarse-adjust and fine-adjust controls provided for both the
transmit and the receive channels. See the User Guide and the
Audio-Level Settings card (both available online) for details on
optimizing these controls for the best audio performance.
3.1 Sidetone
For some installations the user may hear distorted sidetone: They
hear their own voice in the headset as they speak, and it sounds
harsh or rattley. Following the steps outlined on the audio-level
On/Off
On/Off
10 of 13 pages CA12CD Product Summary Revision: E
settings card should help the user to avoid this problem. The
general procedure for avoiding sidetone problems is to avoid
unnecessarily-high transmit-volume levels and to keep the sidetone
controls on the installation—if present—set to their minimum
positions. The sidetone controls may be user-accessible, or they
may be accessible only to service personnel.
The reason for minimizing sidetone from the customer equipment
is due to the delay introduced by the digital architecture (TDMA3)
of the DECT radio link. Sidetone generated in the customer
equipment is delayed by about 20 mS by the time it reaches the
user’s ears. This is enough of a delay to be unpleasant to the user.
Under normal conditions, a local echo canceller in the base stops
sidetone and network-generated echoes from reaching the user, but
if the transmit signal is too high, or if there is non-linear processing
in the sidetone path, sidetone breakthrough will occur, and the user
will hear the distorted audio described above. A sidetone generator
in the remote replaces the sidetone that has been removed by the
local echo canceller.
3.2 Interference
The CA12CD shares its frequency band with other radio products.
Sometimes interference occurs due to other products using the
same band. Interference may result in buzzing or pops in the talk or
listen audio, or irregular mutes of the talk or listen audio, or may
result in shortened range. The following steps may improve the
performance of a CA12CD that is experiencing interference:
Repositioning the base
Limiting the distance between the base and the headset
while in use
Repositioning the interference source, if known
If the CA12CD base or remote is placed within a few inches of a
cellular phone, the CA12CD may experience interference.
Reposition the cellular phone or the CA12CD base or remote to
increase the separation if this problem occurs.
4Range and User Density
Range is as much as 100 feet. The effective limit to range is set by
the onset of audio artifacts as the user gets further away from the
3Time Division Multiple Access
Andere Handbücher für CA12CD
5
Inhaltsverzeichnis
Andere Plantronics Adapter Handbücher
Plantronics
Plantronics VistaPlusDM15 Bedienungsanleitung
Plantronics
Plantronics IP40 Bedienungsanleitung
Plantronics
Plantronics CA10 Bedienungsanleitung
Plantronics
Plantronics VISTAPLUS DM 15 ADAPTER Bedienungsanleitung
Plantronics
Plantronics CA40 DECT Referenzhandbuch
Plantronics
Plantronics CHARGER PLUG-PRONG ADAPTER Bedienungsanleitung
Plantronics
Plantronics CA20 Bedienungsanleitung
Plantronics
Plantronics CA12CD Referenzhandbuch
Plantronics
Plantronics APA-2 (EHS) - S Bedienungsanleitung
Plantronics
Plantronics MX10 Bedienungsanleitung
Plantronics
Plantronics APU-72 Bedienungsanleitung
Plantronics
Plantronics CA40 DECT Bedienungsanleitung
Plantronics
Plantronics IP40 Bedienungsanleitung
Plantronics
Plantronics ENCORE H91 Abmessungen
Plantronics
Plantronics CS Series Bedienungsanleitung
Plantronics
Plantronics CA12CD-S Bedienungsanleitung
Plantronics
Plantronics CA40 DECT Bedienungsanleitung
Plantronics
Plantronics Savi APS-10 Bedienungsanleitung
Plantronics
Plantronics 03929-63 Bedienungsanleitung
Plantronics
Plantronics BT600 USB-C Bedienungsanleitung
