Plantronics BackBeat Pro Bedienungsanleitung

BackBeat PRO

User Guide

Contents

What's in the box 3

Headphone overview 4

Power on/off 4

Active Noise Canceling 4

Play/pause music 4

Volume 4

Track selection 4

Open mic 4

Voice dial (phone feature) 4

Answer or end a call 4

Decline a call 4

Mute 4

Call back last call 4

Get Paired 5

NFC pairing (Android) 5

Charge 6

Adjust the fit 7

Pair second device 8

Use sensors 9

Reset Sensors 10

Airplane Mode 11

Advanced open mic 12

Customize 13

Specifications 14

Support 15

ANC

Headphones Ballistic nylon travel case

Charging cable 3.5mm Apple cable

What's in the box

ANC

Slide the switch to power on or off.

Slide the switch to activate or deactivate Active Noise Canceling (ANC). ANC will block out

unwanted noise.

Tap the Play/pause button on the left ear cup to play or pause music.

Rotate the volume wheel forward (+) or backward (–) to control the volume.

Rotate the track wheel forward or backward to control the track selection.

You will be able to hear your surroundings by tapping the Mic button when not on a call.

Press the Call button for 3 seconds, wait for the phone prompt and then tell the phone to dial

the name of a stored contact.

Tap the Call button on the right ear cup.

Press and hold the Call button for 2 seconds.

During a conversation, press the Mic button . You hear “mute on” or “mute off.” While the

microphone is muted, an alert repeats every 15 minutes.

To dial your last number you dialed, double-tap the Call button .

Headphone overview

Power on/off

Active Noise Canceling

Play/pause music

Volume

Track selection

Open mic

Voice dial (phone feature)

Answer or end a call

Decline a call

Mute

Call back last call

The first time you power on your headphones the pairing process begins.

NOTE If your phone supports Near Field Communication (NFC) go to NFC pairing (Android).

1Holding your headphones, slide the power switch to the on position. The headphone LEDs

flash red and blue.

2Activate Bluetooth®on your phone and set it to search for new devices.

•iPhone®Settings > Bluetooth > On*

•Android™Settings > Bluetooth: On > Scan for devices*

NOTE *Menus may vary by device.

3Select “PLT_BBTPRO.”

Once successfully paired, the headset LEDs stop flashing.

1Ensure NFC is on and your phone’s display is unlocked. (Phones may vary.)

2Tap and hold the headphones to the phone’s NFC tag location until NFC pairing completes. If

necessary, accept the connection.

NOTE The headphone’s NFC tag is located on the outside of the left ear cup. (Phone tag locations

vary.)

L R

Get Paired

NFC pairing (Android)

It takes up to 3 hours to fully charge your headphones. The LEDs turn off once charging is

complete.

TIP To check the headphones battery status, tap the Call button while wearing your headphones.

Headphones must be in idle state.

Your headphones have up to 24 hours of listening time.

Charge

Adjust the headphones for a comfortable fit.

Lengthen or shorten the band until it fits comfortably. When not using your headphones, fold

the ear cushions in and against your body.

Adjust the fit

1Press and hold the Call button until the LEDs flash red and blue.

2Activate Bluetooth on your second device and follow steps 2 and step 3 in "Get Paired."

Pair second device

Smart sensors respond when you put on or take off your headphones.

Putting on your headphones will:

• Resume paused music

• Activate noise cancelling (when switched on)

• Answer an incoming call

• Transfer an active call to headphones

Taking off your headphones will:

• Pause music (while music is playing)

• Deactivate noise cancelling (when switched on)

• Transfer an active call to mobile phone

Enabling or disabling Smart Sensors

When your headset is powered on and in an idle state, press and hold the mic button and the

call button for more than 4 seconds. You will hear a voice prompt alerting you of the change.

ANC

Use sensors

You may need to reset the sensors if they are not working as expected.

1Connect your headphones to the USB port on your computer using the charging cable.

2Lay the headphones on a non-metallic surface and wait at least 10 seconds.

3Disconnect the headphones and try the sensor features again.

Reset Sensors

Andere Handbücher für BackBeat Pro

Inhaltsverzeichnis

Andere Plantronics Kopfhörer Handbücher

Plantronics

Plantronics Blackwire 420 series Bedienungsanleitung

Plantronics

Plantronics Stereo SupraPlus USB Bedienungsanleitung

Plantronics

Plantronics BLACKWIRE C210-M Bedienungsanleitung

Plantronics

Plantronics BackBeat FIT 350 Series Bedienungsanleitung

Plantronics

Plantronics SP2 Bedienungsanleitung

Plantronics

Plantronics SupraPlus CS351N Bedienungsanleitung

Plantronics

Plantronics Backbeat FIT Bedienungsanleitung

Plantronics

Plantronics M120X - QUICK START GUIDES Bedienungsanleitung

Plantronics

Plantronics .Audio 990 Bedienungsanleitung

Plantronics

Plantronics RIG 500 PRO Series Bedienungsanleitung

Plantronics

Plantronics Blackwire C310 Bedienungsanleitung

Plantronics

Plantronics Blackwire C420-M Bedienungsanleitung

Plantronics

Plantronics BackBeat 903+ Bedienungsanleitung

Plantronics

Plantronics BackBeat 100 series Technisches Datenblatt

Plantronics

Plantronics Backbeat Go 2 Bedienungsanleitung

Plantronics

Plantronics Backbeat FIT Bedienungsanleitung

Plantronics

Plantronics BackBeat PRO 2 Bedienungsanleitung

Plantronics

Plantronics backbeat FIT 300 series Bedienungsanleitung

Plantronics

Plantronics BackBeat 116 Bedienungsanleitung

Plantronics

Plantronics backbeat FIT 300 series Bedienungsanleitung

Plantronics

Plantronics CS60-USB DECT Bedienungsanleitung

Plantronics

Plantronics DISCOVERY 925 Bedienungsanleitung

Plantronics

Plantronics BackBeat FIT 3100 Series Bedienungsanleitung

Plantronics

Plantronics BACKBEAT 216 - QUICK START GUIDES Bedienungsanleitung

Beliebte Kopfhörer Handbücher anderer Marken

Sony

Sony MDR-NC8 Bedienungsanleitung

AUSounds

AUSounds AU-Stream Bedienungsanleitung

ENERGY SISTEM

ENERGY SISTEM Style 7 Bedienungsanleitung

Philips

Philips SHE3622 Bedienungsanleitung

Insignia

Insignia NS-CAHBTSPORT Bedienungsanleitung

Movie Vision

Movie Vision HP-400 Bedienungsanleitung

MobiFren

MobiFren SM Pro Bedienungsanleitung

Motorola solutions

Motorola solutions PMLN8120 Bedienungsanleitung

Jaybird

Jaybird freedom Installationsanleitung

Sony

Sony MDR-ED12LP Bedienungsanleitung

HiFuture

HiFuture Tidy Buds Pro Bedienungsanleitung

Creative

Creative CB2530 Bedienungsanleitung

Renkforce

Renkforce RF FTVK-100 Bedienungsanleitung

Philips

Philips SHQ3000 Bedienungsanleitung

Sennheiser

Sennheiser 500371 Bedienungsanleitung

Califone

Califone 2924AV Bedienungsanleitung

Philips

Philips EARGEAR HE205 Series Bedienungsanleitung

Technics

Technics EAH-AZ80 Bedienungsanleitung