PLC Electronic Solutions Veracity Control Wheels Bedienungsanleitung

PLC Electronic Solutions Ltd. www.plcelectronicsolutions.com

Veracity Control Wheels

Wireless Operation Manual

READ ALL INSTRUCTIONS BEFORE OPERATING.

Document Number: PLC850-0010

Document Version: 037

October 2017

Page 2 www.plcelectronicsolutions.com

Contents

Introduction ............................................................................................................................................................................ 4

Unpacking ............................................................................................................................................................................... 5

What is in the case? ............................................................................................................................................................ 5

Mounting............................................................................................................................................................................. 5

Connections ........................................................................................................................................................................ 6

PAN Wheel ...................................................................................................................................................................... 6

TILT/ROLL Wheel(s)......................................................................................................................................................... 6

Power Requirements .............................................................................................................................................................. 7

Plugging In........................................................................................................................................................................... 7

Connectors and Pinouts...................................................................................................................................................... 8

Powering Up........................................................................................................................................................................ 8

Veracity PPM (Wired to RC Controller) Operation ................................................................................................................. 9

Veracity Slice (Wireless) Operation ...................................................................................................................................... 10

Installing the Radio Module onto the Slice....................................................................................................................... 10

Switching between MōVI (Standard Gimbal), Ronin and Maxima Modes ....................................................................... 12

Veracity Slide Mode Switch .............................................................................................................................................. 13

MōVI M10/M15/Standard Gimbal (Spektrum Radio) Setup ............................................................................................ 14

MōVI Pro and MōVI XL (Spektrum Radio) Setup............................................................................................................... 16

DJI Ronin (Futaba Radio) Setup......................................................................................................................................... 18

Maxima (Jeti Radio) Setup ................................................................................................................................................ 19

Basic Maxima Setup ...................................................................................................................................................... 19

Pairing the Maxima and Veracity Control Wheels ........................................................................................................ 24

Slice (Wireless) Zeroing/Drift Correction.......................................................................................................................... 25

Zeroing/Drift Correction with FoMa Control Software:................................................................................................ 25

Zeroing/Drift Correction with MōVI App/Software (MōVI Pro/XL App or Freefly Configurator): ................................ 26

Gimbal Zeroing Without App/Software: ....................................................................................................................... 28

Advanced Gimbal Setup with Deadband Compensation (PLC Veracity Wheels Software).............................................. 29

Troubleshooting.................................................................................................................................................................... 33

Pan/Tilt/Roll axes –incorrect axis control or some axes do not work ............................................................................. 33

Nothing happens –no lights, no sound, no motion.......................................................................................................... 33

Hand Wheels & Radio Controller –do not connect.......................................................................................................... 33

Axis Drifting....................................................................................................................................................................... 33

Lights When Zeroing –do not switch from red to green.................................................................................................. 33

www.plcelectronicsolutions.com Page 3

Tilt/Roll –does not work................................................................................................................................................... 33

FCC Declaration..................................................................................................................................................................... 33

Limited Warranty .................................................................................................................................................................. 34

Technical Support ................................................................................................................................................................. 34

Page 4 www.plcelectronicsolutions.com

Introduction

The Veracity Control Wheels System consists of:

-PAN and TILT Wheel modules, mounted together on default baseplate.

-Power cable and module interconnect cable(s).

-Selected choice of radio module (dependent on gimbal used with)

-Road case with foam insert.

-Optionally additional third axis ROLL Wheel, if ordered.

This manual describes necessary setup requirements and how to operate the Veracity Control Wheels.

The Veracity Control Wheels system is a professional digitally controlled hand wheel system for operation of RC style

camera gimbal mounts.

www.plcelectronicsolutions.com Page 5

Unpacking

What is in the case?

The first thing to note is the Veracity Control Wheels ship in a customized Pelican Storm™hard case, so repackaging for

field use is not required. The foam cut-outs provide spots for the PAN and TILT modules together on the default

baseplate as well as the ROLL wheel, which can be added at any time as an option to the system. There is also space for

the power cable, the interconnect cables that connect the modules and the data cable that plugs into the RC camera

mounting transmitter.

Mounting

The Veracity Control Wheels basic PAN and TILT modules come pre-mounted on a machined aluminum baseplate. It is

easy to mount this plate to any number of commercially available tripods using the centrally located 3/8-16 or ¼-20

tapped holes. The modules need to be mounted on some platform or riser so the Control Wheels are clear to rotate. If

the default mounting plate is not desirable, the individual wheel modules can be removed and mounted as needed via

the 3/8-16 hard points on the bottom of the module.

Page 6 www.plcelectronicsolutions.com

Connections

The Veracity Control Wheels have the following connections:

PAN Wheel

The PAN Wheel module is the ‘smart’ module. It has 4 Lemo connectors on the back of the enclosure. These are

for Power, Data, Tilt and Roll as shown. It also has 4 LEDs and a recessed switch on the same face as the

connectors.

TILT/ROLL Wheel(s)

The TILT/ROLL Wheel modules are interchangeable and have a single connector on the back of the enclosure.

This port connects to the PAN Wheel module, the TILT or ROLL connector determines which the TILT/ROLL

Wheel module will be used for.

www.plcelectronicsolutions.com Page 7

Power Requirements

The Veracity Control Wheels are a 12V or 24V DC system. They are designed to operate with voltages from 8-30V DC

with a draw of less than 0.2 A at 12V. The Veracity Wheels system has built in reverse polarity protection and a self-

resetting internal fuse in the event of overload.

Plugging In

Before applying power, plug in all the connections except the data plug that connects into the RC transmitter. There are

3 or 4 cables that need to be plugged in to the Pan Module. The slave wheel(s) (TILT and/or ROLL), the data cable (plug

into Veracity wheels only before power up, depending on what your RC system requires) and finally the power cable.

The controls are similar to those found on most remote camera mount wheels. The sensitivity pot is an infinite ratio

control. The actual wheel to camera ratios will depend on the mount used and the scaling set up in the RC controller.

The sensitivity makes the digital pulse stream vary from 0 –100% when the wheel is turned as fast as possible. It reduces

the hand wheel signal according to the pot position.

The direction switch is a three position switch. The center position disables the wheels output. The left and right

positions set the direction sense of the wheel.

The LED is green for one direction and red for the other and is off when the wheels are disabled.

Page 8 www.plcelectronicsolutions.com

Connectors and Pinouts

Data Connector

Lemo

4 pos 0S series

Pin 1) TX

Pin 2) PPM Out

Pin 3) RX

Pin 4) Gnd

Power Connector

Lemo

2 pos 0B series

Pin 1) 8-30V DC

Pin 2) Gnd

Axis 2/3 Port

Lemo

7 pos 1B series

Pin1) Switch Rev

P2) Switch Fwd

P3) Encoder A

P4) Vcc

P5) Gnd

P6) Encoder B

P7) Speed Pot

Powering Up

1) Apply power to the Veracity Control Wheels either via a battery or power supply (neither are supplied). The

Green LED over the power connector should come on immediately. If this does not, you should check your

cables and power source.

2) The Yellow LED over the data port should come on shortly after power is applied. This LED flashes indicating that

data is streaming out the data connector. The Veracity Control Wheels have no way of detecting if it is

connected to the RC controller as the communication is a one way stream.

3) The wheel direction lights are off in the center position of the direction switch, and red or green depending on

the direction selected. These will light up or not on power up accordingly.

www.plcelectronicsolutions.com Page 9

Veracity PPM (Wired to RC Controller) Operation

The Veracity Control Wheels stream a PPM (Pulse Position Modulation) signal that is standard on many RC controllers.

They are designed to interface with the ‘trainer’ port commonly available on RC controllers.

Please see the Veracity Wired Manual for more information.

Page 10 www.plcelectronicsolutions.com

Veracity Slice (Wireless) Operation

The Radio Slice eliminates the need for an RC controller to wirelessly control your camera gimbal system.

Here is a step-by-step guide to get your Veracity Slice Control Wheels set-up with your receiver.

Installing the Radio Module onto the Slice

1. With the Control Wheels powered off, insert short end of the 5-pin header into the Slice receptacle.

***Note: Spare headers included with the Slice can be used in the event pins become bent or broken.

2. Using a Philips screwdriver, remove the two screws on the bracket above the Slice receptacle. Remove the

bracket.

Andere Handbücher für Veracity Control Wheels

Inhaltsverzeichnis

Andere PLC Electronic Solutions Audio- und Videozubehör Handbücher

PLC Electronic Solutions

PLC Electronic Solutions Veracity Control Wheels Bedienungsanleitung

Beliebte Audio- und Videozubehör Handbücher anderer Marken

enerserve

enerserve e.manager nD Bedienungsanleitung

Starmatrix

Starmatrix Clever-Pool/220V Betriebsanleitung

TecnoVideo

TecnoVideo VSPT Series Bedienungsanleitung

NeoVolta

NeoVolta NV14 Gebrauchsanweisung

Horizon Fuel Cell

Horizon Fuel Cell FCJJ-40 Bedienungsanleitung

SC&T

SC&T CD108HD Bedienungsanleitung

4-noks

4-noks PR-SA Kurzanleitung

PROAIM

PROAIM CINEMA Series Bedienungsanleitung

Synergistic Research

Synergistic Research UEF ACOUSTIC DOTS Bedienungsanleitung

Paso

Paso C571/6-V Bedienungsanleitung

CMD

CMD bs6396 Bedienungsanleitung

Bluetti

Bluetti EP600 Bedienungsanleitung

Delta Electronics

Delta Electronics AFE075A43A Bedienungsanleitung

Yamaha

Yamaha PTB-4210 Bedienungsanleitung

Burst Electronics

Burst Electronics MCG-2 Bedienungsanleitung

Panasonic

Panasonic DMP-BD60 - Blu-Ray Disc Player Bedienungsanleitung

mind alive

mind alive Smart Bedienungsanleitung

MagniLink

MagniLink S PREMIUM 2 MLS-HD-2 Bedienungsanleitung