Plura MTD-ID Bedienungsanleitung

Operating Manual

Version: 1.2

September 26, 2019

MTD-ID

Additional display for TCUE, TCU & SPT

 
Operating Manual MTD-ID 
 
 
 
 
 
 
CONTENTS 
A1 REVISION HISTORY 
A2 COPYRIGHT 
A3 WARRANTY 
A4 UNPACKING/SHIPPING/REPACKAGING INFORMATION 
A5 SAFETY INSTRUCTIONS 
FUNCTIONAL DESCRIPTION 11 
INTRODUCTION 11 
CONFIGURATION 12 
FIRMWARE UPDATE 13 
TECHNICAL DATA 13 
SPECIFICATIONS 13 
MECHANICAL 13 
MTD-ID KIT 14 
REQUIREMENTS 14 
PREPARATION 14 
INSTRUCTIONS 15 

Operating Manual MTD-ID

A1 Revision History

No.

Date

Subject

0.x

Preliminary documents, changes without notice.

1.0

May 19, 2017

First released document.

1.1

June 7, 2017

Added technical data.

1.2

September 26, 2019

Changed address of Plura Europe GmbH.

The latest document describes the functions of the latest product’s software. You can download

the latest software version from:

https://plurainc.com

A2 Copyright

may be reproduced, translated into another language, stored in a retrieval system, or

transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or

otherwise without the prior written consent of Plura Europe GmbH.

Printed in Germany.

Technical changes are reserved.

All brand and product names mentioned herein are used for identification purposes only and

are trademarks or registered trademarks of their respective holders.

Information in this publication replaces all previously published information. Plura Europe

GmbH assumes no responsibility for errors or omissions. Neither is any liability assumed for

damages resulting from the use of the information contained herein.

For further information please contact your local dealer or:

Plura Europe GmbH

Binger Weg 12

D- 55437 Ockenheim

Phone: +49 6725 918 006-70

Fax: +49 6725 918 006-77

E-Mail: info@plurainc.com

Internet: http://www.plurainc.com

Operating Manual MTD-ID

A3 Warranty

Plura warrants that their products will be free from defects in materials and workmanship for a

period of two years from the date of shipment. If this product proves defective during the

warranty period, Plura, at its option, will repair or replace the defective product without

charge, provided this product is returned to Plura freight prepaid.

In order to obtain service under this warranty, Customer must notify Plura of the defect before

expiration of the warranty period and make suitable arrangements for the performance of

service. Customer shall be responsible for packaging and shipping the defective product to

Plura, please notice the Shipping Information given below.

This warranty shall not apply to any defect, failure or damage caused by abuse, misuse,

improper use, negligence, accident, modification, alteration, or improper or inadequate

maintenance and care.

This warranty is given by Plura with respect to this product in lieu of any other warranties,

express or implied. Plura and its vendors disclaim any implied warranties of merchantability or

fitness for a particular purpose. Plura’s responsibility to repair or replace defective products is

the sole and exclusive remedy provided to the customer for breach of this warranty. Plura and

its vendors will not be liable for any indirect, special, incidental, or consequential damages

irrespective of whether Plura or the vendor has advance notice of the possibility of such

damages.

Operating Manual MTD-ID

A4 Unpacking/Shipping/Repackaging Information

This product has been carefully inspected, tested and calibrated before shipment to ensure

years of stable and trouble-free service.

The shipping carton and pads provide protection for the product during transit. Retain the

shipping cartons in case subsequent shipment becomes necessary.

Carefully unpack the product from its transit material and carefully check the product for signs

of damage. In the event that the product has been damaged during transit, contact the carrier

and your Plura dealer.

Please confirm that all items listed on the packing list have been received. Check the items

against your original order to ensure that you have received the correct parts. If any item is

missing, please contact your Plura dealer.

Ensure that all packaging material is removed from the product and its associated

components before installing the unit.

Products returned to Plura for servicing or repair should have a tag attached showing:

•Name and complete address of the owner and the name of the person that can be

contacted.

•Unit’s serial number and a description of the service required, or failure detected.

Products returned should be shipped prepaid in the original packaging material if possible. If

the original packaging is not available or is unfit for use, supply an adequate packaging

which should meet the following criteria:

•Packaging must be able to withstand the product weight.

•Product must be held rigid within the packaging.

•Allow at least two inches of space between the product and the container.

•The corners of the product must be protected.

•Seal the carton with shipping tape or an industrial stapler.

If the product is still within the warranty period, the product will be returned by prepaid

shipment after servicing.

Operating Manual MTD-ID

A5 Safety Instructions

The general safety information in this part is for both operating and service personnel. Plura

products are only to be used as directed. Specific warnings and cautions will be found

throughout the manual where they apply.

Review the following safety instructions to avoid injury and prevent damage to this product or

any products connected to it.

•Read these instructions.

•Keep these instructions.

•Heed all warnings.

•Follow all instructions.

Safety Terms and Symbols

Terms and Symbols in this manual:

CAUTION: Caution statements identify conditions or practices that could result

in damage to this product or other property.

Terms and Symbols which may be found on the product:

ATTENTION: Refer to the manual.

Observe precautions for handling electrostatic-sensitive devices.

Signal Ground.

Product Damage Precautions

PREVENT OVERHEATING

To prevent product overheating, position the unit only where sufficient air

circulation can be maintained. Good air circulation is essential to prevent

internal heat build-up, do not block any ventilation openings. Do not expose

the unit to direct sun light or any other strong lights. Keep the unit away from

heat sources.

PROVIDE PROPER ENVIRONMENT

Dust, humidity, shocks and strong electromagnetic fields must be avoided. Do

not expose this apparatus to dripping or splashing water. Ensure that no

objects filled with liquid are placed on the apparatus.

Operating Manual MTD-ID

OBSERVE EMC REGULATIONS

The EMC regulations are observed only under the following condition:

Use high quality shielded cables at data inputs and outputs.

SUSPECTED FAILURES

Whenever it is likely that safe operation is impaired, the apparatus must be

made inoperative and secured against unintended operation. The appropriate

service authority must then be informed. Do not operate with suspected

failures. Servicing is required when the apparatus has been damaged in any

way, such as power-supply is damaged, liquid has been spilled or objects have

fallen into the apparatus, the apparatus has been exposed to rain or moisture,

does not operate normally, or has been dropped.

PREVENTIVE MAINTENANCE: CLEANING

Qualified Service Personnel Only: The apparatus should be cleaned often

enough to prevent dust or dirt from accumulating. Dust accumulating in the

apparatus acts as an insulating blanket, preventing proper cooling, and

possibly causing overheating and component breakdown. Under high humidity

conditions, accumulated dust can also provide an electrical conduction path.

Remove accumulated dust with a soft cloth or small paint brush. Remove

hardened dirt with a soft cloth, dampened in a mild detergent and water

solution. Do not use polish or abrasive cleaners or any other chemical cleaning

agents.

PREVENTIVE MAINTENANCE: VISUAL INSPECTION

Qualified Service Personnel Only: Visually inspect the apparatus for signs of

damage, scorched components, and loose or disconnected pin connectors. If

you discover heat damaged parts, try to determine the cause of the

overheating before replacing the damaged parts; otherwise, the damage may

repeat.

ATTENTION:

Observe precautions for handling electrostatic-sensitive devices. See

“Electrostatic Discharge (ESD) Precautions” below for details.

Operating Manual MTD-ID

Electrostatic Discharge (ESD) Precautions

All semiconductor devices are sensitive to ESD. To prevent any damage or

degradation on components of the product caused by ESD, observe these

precautions when directed to do so (installing, removing sensitive

components):

Use a Ground Strap. Wear a grounded anti-static wrist or heel strap to discharge the static

voltage from your body.

1. Use a Safe Work Area. Avoid handling components in areas that have a floor or work

surface covering capable of generating a static charge. Nothing capable of generating or

holding a static charge should be allowed in the work area.

2. Handle ESD sensitive components carefully. Do not slide components over any surface.

Do not touch exposed connector pins. Pick-up components by the body, never by the

leads.

3. Transport and store sensitive components or assemblies in a static-protected bag or

container.

A6 Certifications & Compliances

CE-Declaration:

We,

Plura Europe GmbH

Binger Weg 12

D- 55437 Ockenheim

herewith declare under our sole responsibility that the

MTD-ID

meets the intent of the following directives, standards and specifications:

89/336/EEC Electromagnetic Compatibility

EN 50081-1 Emissions

•EN 55022

•EN 55103-1

EN 50082-1 Immunity

•EN 55024

•EN 55103-2

Inhaltsverzeichnis

Andere Plura Monitor Handbücher

Plura

Plura PBM-217 Gebrauchsanweisung

Plura

Plura DBM-152 Bedienungsanleitung

Plura

Plura UD Series Bedienungsanleitung

Plura

Plura MVM-124 Bedienungsanleitung

Plura

Plura PBM-4K-H Series Bedienungsanleitung

Plura

Plura PBM-070 Bedienungsanleitung

Plura

Plura PBM-4K-H Series Bedienungsanleitung

Plura

Plura PRM-3G Series Bedienungsanleitung

Plura

Plura PBM-070 Bedienungsanleitung

Plura

Plura PBM-224-4K Bedienungsanleitung

Plura

Plura SFP-3G Series Bedienungsanleitung

Plura

Plura PRM-3G Series Bedienungsanleitung

Plura

Plura SFP-H Series Bedienungsanleitung

Plura

Plura PBM-3G Series Bedienungsanleitung

Plura

Plura SFP-H Series Bedienungsanleitung

Plura

Plura 3G Series Bedienungsanleitung

Plura

Plura DBM-124 Bedienungsanleitung

Plura

Plura SFP-217-3G Bedienungsanleitung

Plura

Plura UNB-4K Series Bedienungsanleitung

Plura

Plura DBM-124 Bedienungsanleitung

Plura

Plura LCM-3G Bedienungsanleitung

Plura

Plura PHB-207-3G Bedienungsanleitung

Plura

Plura PBM-4K Series Bedienungsanleitung

Plura

Plura PBM-4K Series Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung