Plus BOARD FAX BF-035 Bedienungsanleitung

BF-035

PLUS

BOARD FAX

OPERATION MANUAL

Deutsch

Italiano

Français

English

Español

中国語

Note:

This equipment has been tested and found to

comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable

protection against harmful interference when the

equipment is operated in a commercial

environment. This equipment generates, uses,

and can radiate radio frequency energy and, if

not installed and used in accordance with the

instruction manual, may cause harmful

interference to radio communications. Operation

of this equipment in a residential area is likely to

cause harmful interference in which case the

user will be required to correct the interference

at his own expense.

PLUS

English

BF-035

OPERATION MANUAL

First of all, we would like to thank you very much

for purchasing a PLUS Board Fax (Electronic

Copyboard) CONFERENCE MODEL.

Please read this Operation Manual before using

the machine to get the best performance out of

the product.

We recommend that you keep this manual for

future reference.

EXPLANATION OF UL REGULATORY LABEL

(USA ONLY)

PLEASE NOTE: The description "Computer Rooms" on the

label located on the rear of the copyboard, refers to areas where

an abundance of computer control equipment (such as high output

servers) is being used, It does NOT refer to environments such

as offices or classrooms where there are simply PC's being used.

UL regulations require that we place a warning label in regard to

this item being used in a "Computer Room". Please understand

that this equipment will in no way interfere with the running of

computer equipment or peripherals. The UL regulation simply

applies to all items that contain flammable material in excess of a

specified area, We would like to further stress that there is no

inherent risk of this equipment causing a fire. It is only pointing

out that should a fire occur, then this equipment will also burn

along with any other flammable materials contained in the room.

Should you have any questions whatsoever about this information,

please call PLUS Corporation of America directly at (201)818-

2700

FEATURES ......................................................... 1

PRODUCT FEATURES ...................................... 2

CONTROL FUNCTIONS ..................................... 3

HOW TO USE ..................................................... 4

MAINTENANCE/HOW TO STORE ..................... 7

HANDLING PRECAUTIONS............................... 7

TROUBLE SHOOTING ....................................... 8

SPECIFICATIONS .............................................. 9

CONTENTS

BF-035 BOARD FAX CARTON CONTENTS

Please be sure all of the following items are included in

the carton with the BF-035 BOARD FAX

Copyboard main unit .......... 1

ACCESSORIES

●Set of Dry-eraseble markers (one each black, red

and blue).

●Dry-Eraser (1)

●Fax Paper (30m(96ft) , 12mm(w/1/2") core)

●Operation Manual with warranty card

OPTIONAL ACCESSORIES

●PC interface board - to enable integration of the

BF-035 and your Personal Computer

FEATURES

●The 1300mm(51")W ×920mm(36")H writing surface provides

ample space to record all information discussed during meetings.

●Since the unit can instantly print an A4/Letter sized copy of

what is on the panel, your audience is freed from distracting

note taking and can fully concentrate on the subject at hand.

●This unit has been designed with 4 writing panels (page 1-4)

which can be printed out. The 5th panel is designed for use as

a projection screen only.

●The BF-035 can be easily upgraded for use with your PC (with

optional PC interface board)

CAUTION: Please do not write on the 5th panel (projection

screen) as it is non-erasable and will stain.

REAR

FRONT

Tray

PRODUCT FEATURES

Printer

Caster

T-shaped stand

Expansion slot

(for optional upgrades)

Optional accessory sold separately:

PC interface board - to enable down-

loading of board information from the

BF-035 to the PC

（）

Writing panel

50mm(2") ×50mm (2")

gridded surface area

Operation panel

Printer hatch

T-shaped stand

AOpening button .............................. Press this button to open the printer hatch when replacing

the thermal paper.

BPower switch .................................. Press "I" to turn ON the power when starting machine

operation.

CPower lamp ..................................... Press the switch, and the green lamp will blink on and off.

The lamp will stay lit (green) when the read sensor inside

the machine is ready for operation.

DPaper warning lamp ....................... When the thermal paper has run out, the red lamp will

light. Load new recording paper.

EPage lamp ....................................... These lamps indicate which panel is on display presently.

The blinking green lamp indicates the page to which the

unit is turning to. (The SCREEN is indicated by an orange

lamp.)

FPAGE-L ........................................... Press this key to slide the panel to the left. (Press once

for each panel you wish to turn to.)

GCopy ................................................ The panel displayed will be printed out on A4/Letter sized

thermal paper. The print out will be reduced proportionally

to the original information on the panel.

HRepeat key ...................................... You can make another copy of the last panel by pressing

this key. The panel will not move while the unit is reprinting.

IPC COPY key .................................. For use with optional PC interface kit.

JPAGE-R ........................................... Press this key to slide the panel to the right. (Press once

for each panel you wish to turn to.)

KScreen key ...................................... Press this key to move to the fifth panel. The unit will not

move to the fifth panel with the PAGE-L key. Press the

SCREEN key again to return to page 1.

OPERATION PANEL

CONTROL FUNCTIONS

PLUSBOARDFAX

BF-035

POWER

POWERON

PAPEROUTOPEN PAGE-L COPY PC SCREEN

A B C D

PAGE-R

FGHIK

PAGE

SCREEN

REPEAT

■BEFORE USE...

●Engage the caster locks to prevent board

movement.

●Plug in and turn ON the power switch.

●Turn on the power switch, and the panel

will slide to show the first page. After

blinking on and off 2-3 times, the power

lamp remains lit.

HOW TO USE

■WHEN COPYING...

To remove printed copy

Simply hold the corner of the page against the top edge of

the printer mouth and gently tear it off.

Repeat key

To reprint the last panel press the repeat key.

Continue to press for additional identical copies.

The panel will not move during this process.

This function will not work until at least one printed copy has

been made after the unit is powered on.

Press the copy key.

The panel slides once, and the written material will be copied on

A4/Letter sized paper.

However, when page 5 (projection screen) is shown, the panel

will not move even if the key is pressed.

POWER

POWER ON

PAPER OUT

HOW TO USE

■WHEN SLIDING THE PANEL FORWARD...

ACCESSING THE PROJECTION SCREEN

Press the screen key to move to the projection screen.

Press the key again to return to page 1.

Press the PAGE-R key to move to a specific page from the

projection screen.

●Page 5 is a projection screen, Please do not write on

page 5, if you accidentally write something on it, erase it

with a cloth dampened with a neutral detergent.

PAGE-R

When page 4 is displayed, press the PAGE-R key, and the

panel will move to page 3.

The page number decreases as many times as you press

the key.

The page you wish to tarn to will be indicated by a flashing LED.

PAGE-L

When page 1 is displayed, press the PAGE-L key, and the

panel will move to page 2.

The page number increases as many times as you press

the key.

The desired page (the page you wish to turn to) number

will be indicated by the blinking LED.

CAUTION: Do not manually move the panel. This may cause severe damage and is not

covered under the warranty.

*To replace the thermal paper

Replace with new thermal paper in the following cases:

When a red line appears on the edges of the thermal

paper.(A red line appears when only about one meter

(3 feet) or so of thermal paper is remaining.)

When the red paper warning lamp lights red.

Press the "open" button to open the

printer cover.

Take out the core left over from the thermal paper.

■WHEN REPLACING THERMAL PAPER...

As illustrated, set the new roll in

so that the tip of thermal paper

extends about 20cm (8") from the

outlet.

●When a red line appears at the edges of the recording paper. The red line will

appear when there is only about one meter (3 feet) or so of recording paper left on

the roll.

●When the paper out lamp lights red.

HOW TO USE

Note:

●Please use only the correct type of recording paper.

●Particular attention must be given to the winding direction of the recording paper, since

copying cannot be performed if the winding direction of the recording paper is reversed.

●Be sure to keep the recording paper straight when loading, failure to do so may cause

wrinkling or tearing of the paper during the copy function.

To close the cover, push both ends

of it until it locks with a clicking noise.

At this time, make sure that the

thermal paper has not slipped off the

edge.

Replace the recording paper in the following situations

Cut off the extra thermal paper

from the printer outlet.

*Automatic Power Cut-off Function

If there is no key operation for about an hour, the fluorescent lamp inside the unit automatically

shuts off and the machine enters a state of power conservation. (At this time, the power indicator

remains lit.)

Once a key is pressed, the fluorescent lamp will light again, and the normal operating condition

is restored.

Inhaltsverzeichnis

Beliebte Interaktives Whiteboard Handbücher anderer Marken

SMART

SMART KAPP42 Bedienungsanleitung

Buhl

Buhl LyteBoard Bedienungsanleitung

SMART Board

SMART Board 680 Bedienungsanleitung

SMART

SMART SBX880 Bedienungsanleitung

Legamaster

Legamaster e-SCREEN ETX Bedienungsanleitung

SMART Board

SMART Board SBM685ix2 Bedienungsanleitung

Seneca

Seneca eno Bedienungsanleitung

BenQ

BenQ RP840G Bedienungsanleitung

SMART

SMART Sympodium IC-150 Bedienungsanleitung

Olivetti

Olivetti OLIBOARD Bedienungsanleitung

Turning Technologies

Turning Technologies MOBIVIEW Bedienungsanleitung

Panasonic

Panasonic UB-5335 Bedienungsanleitung

Dukane

Dukane ITP84 Bedienungsanleitung

Bretford

Bretford EDUIMS Konfigurationshandbuch

Panasonic

Panasonic Panaboard UB-5315 Bedienungsanleitung

TRIUMPH BOARD

TRIUMPH BOARD ULTRA SLIM Bedienungsanleitung

Returnstar Interactive Tech

Returnstar Interactive Tech IQBoard DVT V7.0 Bedienungsanleitung

AVer

AVer CP series Bedienungsanleitung