Plustek NVR 4000 Bedienungsanleitung
Setup
Configuration
Technical Guides
©2009 Plustek Inc. All Rights Reserved.
No portion of this manual, including the products and software described in it, may be
reproduced, transmitted, transcribed, or translated into any language in any form or
by any means, except documentation kept by the purchaser for backup purposes,
without the express written permission of Plustek Inc. All other trademarks and brand
names appearing in this manual are property of their respective owners, and are
used only for identification or explanation and to the owner’s benefit, without intent to
infringe.
While all efforts have been made to ensure the accuracy of all contents in this
manual, Plustek assumes no responsibility or liability for errors or omissions or by
statements of any kind in this manual, whether such errors are omissions or
statements resulting from negligence, accidents, or any other cause. The
specifications and information contained in this manual are furnished for
informational use only, and are subject to change at any time without notice, and
should not be construed as a commitment by Plustek.
The NVR device is intended to be used in a lawful manner. Certain operations of the
NVR device may be prohibited by local laws in some countries of states, such as the
surreptitious recording of audio and/or video communications for certain purposes. If
you have any question about whether a proposed use of your products is lawful,
consult a local legal authority beforehand.
The product is designed and manufactured to achieve sustainable environmental
improvement. We strive to produce products in compliance with global environmental
standards. Please consult your local authorities for proper disposal. The product
packaging can be recycled.
Attention to recycling (For EU countries only)
Protect your environment! Never throw the NVR device into the household waste
container. Please give it to the free collecting center in your community.
All the screen shots in this guide were made using Windows XP. If you are a
Windows Vista or 2000 user, your screens will look somewhat different but the
product functions are the same.
i
Table of Contents
Introduction..................................................................................................1
How to Use This Guide..........................................................................................1
Conventions of This Guide..............................................................................1
A Note about Icons.........................................................
錯誤
!
尚未定義書籤。
Safety Precautions..........................................................................................2
Main NVR Features...............................................................................................2
Minimum System Requirements............................................................................3
Box Contents.........................................................................................................3
Overview................................................................................................................4
Chapter I. Setup the NVR .............................................................................5
Setup the NVR System..........................................................................................5
Chapter II. NVR Live View............................................................................7
Log in the NVR......................................................................................................7
Method I. Network Device Search Tool Application........................................7
Method II. IE Address Bar...............................................................................8
LiveView..........................................................................................................8
Log out the NVR..................................................................................................10
Chapter III. Advanced NVR Configuration .................................................11
Status ..................................................................................................................12
NVR Status ...................................................................................................12
IPCam Status................................................................................................13
Network ...............................................................................................................13
WAN..............................................................................................................13
LAN...............................................................................................................18
Client List ......................................................................................................19
IPCam..................................................................................................................19
Device Management.....................................................................................20
Disconnect Notification..................................................................................21
Motion Detection...........................................................................................22
Video Settings...............................................................................................24
Event Settings...............................................................................................25
Hard Disk.............................................................................................................28
System.................................................................................................................28
Users.............................................................................................................28
Maintenance..................................................................................................29
Log................................................................................................................31
System Settings............................................................................................31
Date & Time..................................................................................................32
Database.............................................................................................................32
ii
Alarm.............................................................................................................32
Management.................................................................................................33
Data Management.........................................................................................34
Record View..................................................................................................34
Schedule Settings................................................................................................36
Record Schedule...........................................................................................36
Event Schedule.............................................................................................37
Chapter IV. Technical Guides......................................................................38
LED Indicators.....................................................................................................38
Search Tool .........................................................................................................38
IP Configuration Information................................................................................39
Use the NVR with Dynamic IP Address...............................................................40
Proxy Server........................................................................................................42
Reset the NVR.....................................................................................................43
Turn off the NVR..................................................................................................44
Appendix A: Glossary..................................................................................45
Appendix B: Specifications .........................................................................48
Appendix C: Customer Service and Warranty.............................................49
Statement of Limited Warranty............................................................................49
FCC Radio Frequency Statement .......................................................................50
Contacting Plustek......................................................................................51
1
Introduction
Thank you for selecting us as your NVR supplier. Like all of our products, your new
NVR is thoroughly tested and backed by our reputation for unsurpassed
dependability and customer satisfaction. We hope you will continue to turn to us for
additional quality products as your computing needs and interests grow.
How to Use This Guide
This User’s Guide provides instructions and illustrations on how to setup and
configure your NVR. This guide assumes the user is familiar with Microsoft Windows
XP and 2000 Professional. If this is not the case, we suggest you learn more about
Microsoft Windows by referring to your Microsoft Windows manual before using your
NVR.
The Introduction section of this manual provides an outline of this manual, and
describes the minimum system requirements, the main features and box contents.
Chapter I describes how to set up basic NVR and IP Camera system in the network
environment.
Chapter II describes how to log in the NVR interface and get live view of the IP
cameras connected.
Chapter III provides you with plenty of illustrations and information about advanced
configuration of the NVR. You may get familiar with it and try out all functions
provided with the NVR.
Chapter IV provides useful technical information and usage tips.
Appendix A covers the glossary that may help you to understand more about the
network and network devices.
Appendix B contains the Specifications of the NVR you purchased.
Appendix C contains our customer service, limited warranty agreement and FCC
statement.
Conventions used in this guide
Warning
Warning: A procedure that must be followed
carefully to prevent injury or accidents when trying
to complete a task.
Attention
Attention: Instructions that you MUST follow to
complete a task and may prevent mistakes.
Information Information: Tips and additional information to
help completing a task.
“XXX” — Represents commands or contents on your computer screen.
Bold — Represents important notes.
2
Safety Precautions
Before you use this device, read the following information carefully to eliminate or
reduce any possibility of causing damages and personal injury.
1. Do use the AC adapter that comes with this device. Using the other AC adapter
from a different manufacturer may lead to malfunction, heat up, electrical shock,
fire or injury.
2. Keep the space around the adapter clear in case you need to quickly unplug the
adapter during emergencies.
3. Do not install near any heat sources such as radiators or other devices.
4. Use only attachments/accessories such as cover and plates specified by the
manufacturer.
5. Do not touch the unit or the AC adapter when the device is powered on.
6. Unplug the device if you don’t need to use for a certain period of time to avoid
any risks of causing fire.
7. Do not disassemble the NVR case.
8. Please contact your distributor to obtain compatible IP camera list.
9. Damaged wire could cause fire or electrical shock. Keep the power cord straight
and without being twisted, bended, or scraped.
10. Moisture condensation may occur inside this device and cause malfunction at
these conditions:
When this device is moved directly from a cold to a warm location.
After a cold room is heated.
When this device is placed in a damp room.
To avoid the moisture condensation, you are recommended to follow the
procedure:
Seal this device in a plastic bag for it to adapt to room conditions.
Wait for 1 ~ 2 hours before removing this device from the bag.
11. Do not install NVR where the temperature is less than 0°C (+32°F) or greater
than +40°C (+104°F). Avoid excessive smoke, mechanical, dust, or direct
sunlight exposure.
Main NVR Features
Real-time live view supervision
Scheduled Recording, Manual Recording and Event Triggered Recording
Record Playback
Motion Detection
TCP/IP / SMTP / DNS / DDNS / UPnP Support
PTZ camera control
3
Minimum System Requirements1
The NVR is recommended to work with a personal computer or network that meets
the following requirements:
Operation System Microsoft® Windows® 2000 Professional, XP Home Edition
or XP Professional, Vista compatible
CPU Intel Pentium® 4 processor or above
Network Protocol TCP/IP Network protocol installed. (DHCP, Static IP, DDNS,
SMTP)
Web Browser Internet Explorer 6.0 or later2
RAM 256 MB (512 MB or higher recommended)
Ethernet Interface 10/100 Mbps Ethernet Card and Category 5 cables for
network connections3
Others CD-ROM/DVD Drive, Video card that supports 16-bit color
or greater, 800 MB Free Hard Disk Space
Box Contents4
Before you start installing your NVR, check the box contents to make sure all parts
are included. If any of the above items is damaged or missing, contact your retailer
immediately.
1. NVR
2. Power Cable
3. AC Adapter
4. Reset Pin
5. User’s Guide
6. Installation CD
1The system requirements here are only a guideline, as in general the better the computer
(motherboard, processor, hard disk, RAM, video graphic card), the better the results.
2The program is available with Microsoft Windows and therefore is not included in the
Setup/Application CD-ROM of this product.
3These parts are not included in the package.
4Save the box and packing materials in case you need to transport this NVR in the future.
The product packaging can be recycled.
4
Overview
1. Power Indicator
2. HDD Indicator
3. WAN Indicator
4. LAN Indicators
5. 4 LAN Ports
6. WAN Port
7. COM Port
8. Power Hole
9. DC-Jack
10. RESET Hole
5
Chapter I. Setup the NVR
Before you setup the NVR (Network Video Recorder), make sure all components are
available and ready. A list of the package contents is provided in the Box Contents
section of this guide. If any of the above items is damaged or missing, contact your
retailer immediately.
Setup the NVR System
To set up the NVR system in your LAN environment:
1. Plug the RJ-45 connectors into LAN port of NVR and IP camera RJ-45 port.
2. Plug the RJ-45 connectors into WAN port and Router’s LAN port.
3. Turn on the Router (Router with UPnP on/off function is recommended).
4. Plug the AC adapter into the DC-Jack of the NVR. Attach the power cable to
the AC adapter. Plug the other end of the power cable into a standard AC
power outlet.
5. Connect PC or Laptop with Router LAN port.
6. Insert the Installation CD, included with your NVR, into your CD-ROM drive.
6
7. Double click the “vcredist_x86.exe” file in your language on the CD-ROM to
install the Microsoft Visual C++ 2005 SP1 Redistributable Package (x86).
8. Run the “Network Device Search Tool” application on the CD-ROM.
9. When the NVR lists in the Network Device Search Tool window, your NVR
works properly.
Andere Handbücher für NVR 4000
1
Inhaltsverzeichnis
Andere Plustek Netzwerk-Hardware Handbücher
Beliebte Netzwerk-Hardware Handbücher anderer Marken
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung
Yudor
Yudor YDS-16 Bedienungsanleitung
D-Link
D-Link ShareCenter DNS-320L Bedienungsanleitung
Samsung
Samsung ES1642dc Gebrauchsanweisung
Honeywell Home
Honeywell Home LTEM-PV Montageanleitung
