PNI SafeHome PT330 Bedienungsanleitung

PNI SafeHome PT330

EN User manual ......................................................... 2

BG Ръководство за употреба ............................. 10

DE Benutzerhandbuch .............................................. 18

ES Manual de usuario ............................................... 26

FR Manuel utilisateur ............................................... 34

HU Használati utasítás .............................................. 42

IT Manuale utente .................................................. 50

NL Handleiding ........................................................ 58

PL Instrukcja obsługi ............................................... 66

RO Manual de utilizare ............................................. 74

PNI SafeHome PT330

Smart air quality detector

User manual

3 - User manual

PNI SafeHome PT330 is a smart device for remote monitoring of

the air quality. The sensor can detect formaldehyde (CH2O), volatile

organic compounds (VOC), carbon dioxide (CO2), and, in the same

time, can measure air temperature and air humidity.

Note: Do not expose the sensor to strong airﬂow (near air conditioners

or fans) or high gas concentrations for a long time.

Technical speciﬁcations

• Supply voltage: 5V 1A

• Current: 10-496mA

• Communication frequency: 2.4GHz

• Transmission power: 100mW

• Dimensions: 90 x 90 x 35mm

• Weight: 95 g

• Operating temperature: -26°C ~ +80°C

4 - User manual

Measured parameters

Formaldehyde (CH2O) 0 - 10.00 mg/m3

Volatile Organic Compounds (VOC) 0 - 99.9ppm

Carbon dioxide (CO2) 0 - 1000ppm

Air temperature 0 -60°C

Air humidity 0 - 95%

Control from the Tuya Smart application

1. Download and install the Tuya Smart application on your

smartphone. Search for the app in the Google Play / App Store or

scan the QR code below:

5 - User manual

Android iOS

2. After installation, open the application, create an account and log

in.

3. Enable WiFi (2.4GHz) and GPS Location on your mobile phone.

4. To add the sensor to the application, click on the “+” icon in the

upper right corner.

5. Select from the menu on the left Sensors - Sensor (WiFi)

6. Power on the sensor. The blue LED ﬂashes frequently. If the LED

does not ﬂash frequently, press the Reset key on the sensor for about

5 seconds.

7. Select the WiFi network you want to connect to and add the

network password.

6 - User manual

8. Tap Next and select Blink quickly.

9. Wait for the application to identify your sensor.

10. Once the sensor is found, press the “+” button next to the sensor

and after a few seconds press the Done button to ﬁnish the pairing

procedure.

7 - User manual

The main interface of the sensor gives you information about the

current temperature (expressed in Celsius or Fahrenheit), humidity

(%), the concentration of volatile organic compounds (VOC)

expressed in ppm, the concentration of carbon dioxide (CO2)

expressed in ppm and the concentration of formaldehyde (HCHO)

expressed in mg / m3.

8 - User manual

You can create smart scenarios with other Tuya compatible products.

Thus, if the temperature is too high, the air conditioner can turn on

or if it is too low it can automatically turn on the hot air generator. If

the air is too dry it can turn on the humidiﬁer. If the detected gas level

exceeds the preset level, the air puriﬁer may turn on.

When creating smart scenarios, for each measured parameter, you

can set the alarm level (less than, equal to, or greater than).

9 - User manual

Simpliﬁed EU Declaration of Conformity

SC ONLINESHOP SRL declares that PNI SafeHome PT330

Intelligent Air Quality Sensor is in compliance with RED Directive

2014/53 / EU. The full text of the EU Declaration of Conformity is

available at the following internet address:

https://www.mypni.eu/products/8657/download/certiﬁcations

PNI SafeHome PT330

Интелигентен детектор за качество на въздуха

Ръководство за употреба

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere PNI Sicherheitssensor Handbücher

PNI

PNI SafeHouse HS003 Bedienungsanleitung

PNI

PNI SafeHouse HS525 Bedienungsanleitung

PNI

PNI SafeHouse HS003LR Bedienungsanleitung

PNI

PNI SafeHome PT03 Bedienungsanleitung

PNI

PNI SafeHouse HS140 Bedienungsanleitung

PNI

PNI SafeHouse HS002LR Bedienungsanleitung

PNI

PNI SafeHome PT252 Bedienungsanleitung

PNI

PNI A005 Bedienungsanleitung

PNI

PNI PG06 Bedienungsanleitung

PNI

PNI Safe House HS530 Bedienungsanleitung

PNI

PNI SAFE HOUSE PG07 Bedienungsanleitung

PNI

PNI SAFE HOUSE DUAL GAS 250 Bedienungsanleitung

Beliebte Sicherheitssensor Handbücher anderer Marken

THORLABS

THORLABS PDA10JT Bedienungsanleitung

Waeco

Waeco UV-DETECT Bedienungsanleitung

Intermatic

Intermatic IOS-DSIMF Bedienungsanleitung

urmet domus

urmet domus 1083 Bedienungsanleitung

Siemens

Siemens AZL66 Series Bedienungsanleitung

BTI

BTI Profiline Multi Finder Bedienungsanleitung

Challenger

Challenger SL01 Bedienungsanleitung

DMP Electronics

DMP Electronics 1122INT Bedienungsanleitung

Rielta

Rielta Ladoga MK-RK Bedienungsanleitung

Mirion Technologies

Mirion Technologies ACCURAD PRD Bedienungsanleitung

Bosch

Bosch DS835 Bedienungsanleitung

Lamptime

Lamptime ST05C Bedienungsanleitung

Ubiquiti

Ubiquiti MFI-MSC Bedienungsanleitung

Subsite

Subsite 910R Montageanleitung

Satel

Satel OPAL Pro Bedienungsanleitung

Aleph

Aleph XC-1XTEU Bedienungsanleitung

Pima

Pima LARIS QUAD Bedienungsanleitung

Solinst

Solinst 301 Bedienungsanleitung