Point Source Audio CM-i3 Bedienungsanleitung
®
CM-i3
Intercom Headset
With Dynamic Microphone
Owner’s Manual
Product Warranty
Point Source Audio (PSA) products purchased in the
U.S.A. are warranted for one year from date of purchase
to be free of defects in materials and workmanship.
In event of such defect, product will be repaired without
charge or replaced (at our option) with a new product
of equal or superior value. This warranty excludes
defects due to normal wear, abuse, shipping damage,
or failure to use product in accordance with instructions.
This warranty is void in the event of unauthorized repair
or modication.
Please register your product warranty and always
KEEP YOUR RECEIPT.
REGISTER YOUR WARRANTY
Your prompt product registration establishes your right to
the protection available under the terms and conditions of
your Point Source Audio warranty. It also helps us contact
you in the rare event that we discover an issue with your
product. And, it helps us to bring you new products
specically designed to meet your needs.
www.point-sourceaudio.com/warranty.html
© 2017 Point Source Audio. All rights reserved. The Point Source
Audio logo is a registered trademark of Point Source Audio. All other
trademarks included herein are the property of their respective owners.
Patent Number: 9,271,065
Specications
Microphone Specications
ELEMENT: Moving coil dynamic
DIRECTIONAL
CHARACTERISTICS:
Noise Cancelling
Cardioid
SENSITIVITY: -60dBV/Pa
FREQUENCY: 300Hz to 10kHz
IMPEDANCE: 200Ω
Earphone Specications
SPEAKER TYPE Single driver ported
SENSITIVITY 120dB SPL@1VRMS
(at 1 kHz)
IMPEDANCE 32Ω
COLOR Silver housing with gold
band, black cable
CABLE LENGTH (TOTAL) 1.2 Meters
L/R CABLE 50 cm
INPUT CONNECTOR 3.5 mm
TRANSDUCER HOUSING Metal
(Design and specications are subject to change without notice).
www.point-sourceaudio.comwww.point-sourceaudio.comwww.point-sourceaudio.com
Read the enclosed instructions and cautions thoroughly
before using this product. Failure to observe the proper
use of this product could result in voiding your warranty.
www.point-sourceaudio.comwww.point-sourceaudio.com www.point-sourceaudio.com
Switching Intercom Systems
Your headset can be conveniently adapted to work with
different intercom systems or even your smart phone. See our
adapter cables in the Parts List for cross compatibility options.
Storing Your Headset
Follow these instructions for proper storage:
Parts List
Included Accessories
EM-3 EM-3 Earphones terminated with 3.5mm
mini connector
CM-CSE Premium headset storage case, orange
CM-WSN Windscreen for CM-i3 with o-ring
CM-BCP Belt clip accessory for XLR connector
CM-HSi Headband sizer
Optional Accessories
ADP-4Mx5Mm Adapter cable: 4-pin male XLR to 5-pin
male mono XLR
ADP-5Fx4F Adapter cable: 5-pin female XLR to 4-pin
female XLR
ADP-4MxPH Adapter cable: 4-pin male XLR to male
3.5mm TRRS
ADP-5FxPH Adapter cable: 5-pin female XLR to male
3.5mm TRRS
ADP-PHx4F Adapter cable: female 3.5mm TRRS to
4-pin female XLR
ADP-PHx5Mm Adapter cable: female 3.5mm TRRS to
5-pin male mono XLR
ADP-PHx5Ms Adapter Cable: female 3.5mm TRRS to
5-Pin Male Stereo
CM-PCH Intercom headset travel pouch, black
CM-EXT-4/5
Expandable cable with 4 or 5-pin
male and female XLR.
2 ft. retracted / 10 ft. extended
CM-CAB-KIT Cable wrap with earphone installation
tool
6-ETP-S
6-ETP-M
6-ETP-L
3 sets eartips for EM-3/5 earphones.
Specify size: small, medium, or large
Fitting Your Headset
To size the headband for a tighter t, attach the CM-HSi to
the head frame on both sides.
Securing Your Microphone
When adjusting your boom microphone, always secure the mic
to the headset by aligning the arrow with the circle to “lock”
the mic into position. Do NOT force the boom past this point
as it may cause damage to your microphone over time.
STEP 1
STEP 2
Line up the symbols to
lock the boom into place.
Place headset and ensure
microphone is safely
tucked into the base.
Next, gently coil
the cable on top
of the headset.
Inhaltsverzeichnis
Andere Point Source Audio Kopfhörer Handbücher
