Polk Audio LC265I-IP Bedienungsanleitung

www.PolkAudio.com /800.377.7655 (USA & Canada) /410.358.3600 (Worldwide) 1

LC265i-IP Hardware (included)

• One LC265i-IP speaker

• Performance Optimization Wizard – CD-ROM

• Euro-style (Phoenix) power supply connector

• Mounting template

• Paint mask

• Weather-resistant aluminum grille

and stainless steel hardware

•LCi-IP manual

• Laminated configuration setup card

• Registration card

Note: If you are setting up LCi-IP speakers to be controlled via an

IP-network such as NetStreams™ Digilinx™

, purchase a network card, which

is sold separately, from NewStreams™

. The network card will control up to

one pair of speakers.

Important Note: If anything is missing or damaged, or if your LCi-IP speaker

fails to operate, notify Polk Audio Installer Support Services immediately at

800-377-7655. Hours: Mon-Fri, 9am - 5:30pm EST.

Accessories (not included)

• Performance Enclosure for exact volume enclosure performance

in pre-build installations. Improves bass performance and

sound isolation. Model number: ENCL265.

• Speaker-level-to-line-level transformer, such as the PAC SNI-35.

(For analog installations only. Powers up to 2 each LC265i-IP speakers.)

• SPS-1 Power Supply (a power supply is required).

THIS DOCUMENT APPLIES TO LC265i-IP AND LC80i-IP PRODUCTS

Cutsheet for LC265i-IP/LC80i-IP

World’s First Active High Performance IP Addressable Loudspeakers

Polk Audio LCi-IP Ultra High Performance In-Wall/ In-Ceiling Loudspeakers are the world’s first active Internet Protocol-ready Loud-

speakers. They were created for IP networked systems (such as the ground-breaking NetStreams™DigiLinx™system). Integrated digital

amplifiers eliminate remote amplifiers connected via hundreds of feet of performance-robbing speaker wires. The built-in Digital

Signal Processor (DSP) and supplied Room Correction Software (the Performance Optimization Wizard™) enable every LCi-IP speaker

to be optimized for maximum performance in any room. While the LCi-IP Series provides the greatest functionality when used

within an IP-based system, these speakers are also compatible with any analog distributed audio system.

Cutout

Dimension

19 1/4"

(48.9 cm)

Cutout

Dimension

7 1/4"

(18.4 cm)

Total

Depth

3 9/16"

(9.1 cm)

LC265i-IP Dimensions

Overall Height 20 7/8" (55.5cm)

Overall Width 8 1/2" (30.4cm)

Available Finish: Paintable White

LC265i-IP Performance Enclosure Dimensions

55 5/8" H x 14" W x 3 3/8" D (141.3cm x 35.6cm x 8.6cm)

2Polk Audio Custom Install Product: LC265i-IP, LC80i-IP

Cutout

Dimension

9 7/16"

(23.9 cm)

Total

Depth

7 7/16"

(18.9 cm)

LC80i-IP Dimension

Outer Diameter 10 3/4" (27.3cm)

Available Finish: Paintable White

IEC Socket

This is a standard

IEC socket.

Power Connectors

For optimum performance, we recommend using 14-gauge,

4-conductor wire between the power supply and each

amplifier (see the LCi-IP manual for other wiring options).

Note: Leave at least 2-3 inches

of clearance on the sides and

top of the power supply.

LC80i-IP Hardware

• One LC80i-IP speaker

• Performance Optimization Wizard – CD-ROM

• Euro-style (Phoenix) power supply connector

• Mounting template

• Paint mask

• Weather-resistant aluminum grille

and stainless steel hardware

•LCi-IP manual

• Laminated configuration setup card

• Registration card

Note: If you are setting up LCi-IP speakers to be controlled via an

IP-network such as NetStreams™ Digilinx™

, purchase a network card, which

is sold separately, from NewStreams™

. The network card will control up to

one pair of speakers.

Important Note: If anything is missing or damaged, or if your LCi-IP speak-

er fails to operate, notify Polk Audio Installer Support Services

immediately at 800-377-7655.

Accessories (not included)

• Performance Enclosure for exact volume enclosure performance

in pre-build installations. Improves bass performance and

sound isolation. Model number: ENCL 80IP.

• Speaker-level-to-line-level transformer, such as the PAC SNI-35.

(For analog installations only. Powers up to 4 each LC80i-IP speakers.)

• SPS-1 Power Supply (a power supply is required).

Power Supply

The SPS-1 power supply was specifically designed to produce clean,

reliable power to ensure that all Polk Audio LCi-IP loudspeakers perform

to their maximum capabilities. All output connectors are protected

against short circuit and over current.

Specifications

Output

Voltage 48VDC

Current 8A (Max continuous)

Input

Voltage Range 100-240 VAC Nominal Auto Switching

Frequency 50-60Hz

Current Draw 8A (120V)

3.5A (240V)

Dimensions

Width 4.9" (125mm)

Height 3.1" (79mm) , 3 11/16"(93.6mm) with feet

Length 14" (358mm)

Shipping Weight 8.4lbs (4kgs)

Protection Thermal, short circuit,current/power overdraw

Fuse Replacement T8AH500V

LC80i-IP Performance Enclosure Dimensions

20 5/8" H x 13" W x 9" D (51.8cm x 33.0cm x 22.9cm)

Capabilites

SPS-1 will power 2 LC265i-IP speakers or 4 LC80i-IP speakers.

PERFORMANCE

OVERALL FREQ. RESPONSE 20Hz-27kHz

FREQ. RESPONSE -3DB LIMIT 35Hz-27kHz

ANALOG AUDIO SIGNAL

VOLTAGE INPUT (LINE-LEVEL) FULL OUTPUT 2V RMS

AMPLIFIER SNR > 90DB

FIRMWARE UPGRADABLE YES

MID-BASS DRIVER 1–6.5"(16.5CM) MINERAL POLYPROPYLENE

CONE, RUBBER SURROUND;

WOOFER 1–6.5"(16.5CM) AERATED POLY-

PROPYLENE CONE WITH 1.5" VOICE COIL

TWEETER 1" (2.5CM) RING RADIATOR IN SWIVEL MOUNT

OUTSIDE DIMENSIONS 8 1/2" X 20 7/8" (21.59CM X 53.04CM)

CUTOUT DIMENSIONS 7 1/4" X 19 1/4" (18.42CM X 48.90CM)

MOUNTING DEPTH (WITH 1/2" DRYWALL) 3 1/16" (7.78CM)

INSTALLED WEIGHT 8.7 LBS (3.9kg)

SHIPPING WEIGHT 11.6 LBS (5.3kg)

POWER CONTINUOUS RATINGS

200W speaker with < 0.5% THD+N (25W tweeter 4 Ohms, 75W mid

8 Ohms, 100W woofer 8 Ohms)

POWER REQUIREMENTS PER SPEAKER

VOLTAGE INPUT 48VDC

CURRENT DRAW 4.5A MAXIMUM

LC265i-IP Specifications

www.PolkAudio.com /800.377.7655 (USA & Canada) /410.358.3600 (Worldwide) 3

LC80i-IP Specifications

PERFORMANCE

OVERALL FREQ. RESPONSE 25Hz-27kHz

FREQ. RESPONSE -3DB LIMIT 40Hz-27kHz

ANALOG AUDIO SIGNAL

VOLTAGE INPUT (LINE-LEVEL) FULL OUTPUT 2V RMS

AMPLIFIER SNR > 90DB

FIRMWARE UPGRADABLE YES

MID-BASS DRIVER 1–8"(20.3CM) COMPOSITE POLYPROPYLENE

CONE, RUBBER SURROUND

TWEETER 1"(2.5CM) RING RADIATOR IN SWIVEL MOUNT

OUTSIDE DIMENSIONS 10 3/4" DIA (27.3CM)

CUTOUT DIMENSIONS 7 3/8" DIA (18.7CM)

MOUNTING DEPTH (WITH 1/2" DRYWALL) 6 15/16" (17.6CM)

INSTALLED WEIGHT 4.8 LBS (2.2kg)

SHIPPING WEIGHT 6.8 LBS (3.1kg)

POWER CONTINUOUS RATINGS

100W speaker with < 0.5% THD+N (25W tweeter 4 Ohms, 75W mid

4 Ohms)

POWER REQUIREMENTS PER SPEAKER

VOLTAGE INPUT 48V OR 28VDC

CURRENT DRAW 2.3A @48V, OR

3.8A @ 28V MAXIMUM

INHERENT DELAY

INHERENT DELAY FOR EACH SPEAKER IS:

-2.5 MILLISECONDS -4.4 MILLISECONDS

ANY OTHER DELAY IS FROM THE MULTI-ROOM AUDIO VISUAL (MRAV).

PROTECTION CIRCUITRY

Thermal, short-circuit, current overdraw,

clipping compresser/limiter, reverse polarity

CONTROLS AND ADJUSTMENTS

(Performance Optimization Wizard Program)

COMPUTER REQUIREMENTS

OPERATING SYSTEM WINDOWS XP

USB PORT 5-WIRE USB 1.1 CONNECTOR

HARD DRIVE 5 MEGABYTES

REQUIRED SPEAKER CONNECTIONS

TO CONNECT YOUR COMPUTER TO THE SPEAKER, YOU HAVE TWO OPTIONS:

1. USB PORT (ANALOG USE ONLY)

2. ETHERNET JACK WITH NETWORK DECODER CARD (SOLD SEPARATELY).

LC265i-IP and LC80i-IP Specifications

4Polk Audio Custom Install Product: LC265i-IP, LC80i-IP

LC265i-IP/LC80i-IP Specifications (continued)

Connections

Wire Recommendations

Network Line

Shielded Cat5e or Cat6 cable with RJ-45 connectors. Wiring term-

ination convention should be the same at both ends of the cable.

COMM Line

Shielded Cat5e or Cat6 cable with RJ-45 connectors. Wiring term-

ination convention should be the same at both ends of the cable.

Analog Line

Low capacitance multi-stranded RCA shielded cable, or

speaker wire with speaker-level-to-line-level transformer

(such as the PAC SNI-35).

USB Connection

USB 1.1, 5-wire, USB to mini-USB cable.

Power Lines

These recommendations are for all connections from the

power supply to each speaker. 14/4 is recommended for

all applications. If this is not possible, refer to this chart:

Wire length Wire gauge/

# of Conductors

<50’ 16/2

50-100’ 16/4

>100’ 14/4

Network Decoder Card

See Owner’s Manual for installation instructions

Amplifier Connections

LCi-IP speakers are designed for use with analog and digital systems.

The speakers perform equally well in either mode, though the digital

mode offers greater control functionality. Speaker-level-to-line-level

adapters are available for legacy analog systems where speaker wire

is already run, allowing connection to RCA input of the speaker.

Recommended Configuration

LCi-IP Performance Optimization WizardSM Program

Polk Audio provides the Performance Optimization WizardSM

on CD-ROM. This program enables you to optimize the perform-

ance characteristics of Polk Audio LCi-IP speakers specifically to

their location in a given room and to the physical characteristics

of that room. You can also download the Performance

Optimization Wizard from our website

(www.polkaudio.com/downloads/po-wizard.exe ).

Walking Through the Room Optimization Choices

• This program can be used for installing and setting up in-wall or

in-ceiling LCi-IP speakers and asks basic configuration and room

environment questions (figure1).

Figure 1

Depending on the speaker you’re installing, its location and the

room, you may be asked for a series of measurements, including the

height of the listening room’s ceiling, distances from walls, ceiling

and floor to the speaker(s), as well as vertical and horizontal angles

of speakers relative to the listening area. You may also be asked to

provide measurements for the height, width, depth and center of the

listening area (see the LCi-IP Owner’s Manual for more).

Factory Support

For product support visit our website at www.polkaudio.com

or Polk Audio Customer Service: 1-800-377-7655 (Outside US &

Canada: 410-358-3600) Monday-Friday, 9:00 AM-6:00 PM EST,

[email protected]

For more information on the LCi-265IP and LCi-80IP log onto

http://www.polkaudio.com/downloads/manuals/home/

LCi-265IP LCi-80IP_Manual.pdf.

RCA

COMM

Network In

Eurostyle

(Phoenix)

Power In

Tweeter

Andere Handbücher für LC265I-IP

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Polk Audio Sprecher Handbücher

Polk Audio

Polk Audio LCi-RTS100 Bedienungsanleitung

Polk Audio

Polk Audio LCi-RTS105 Bedienungsanleitung

Polk Audio

Polk Audio RM30 Bedienungsanleitung

Polk Audio

Polk Audio RM7300 Bedienungsanleitung

Polk Audio

Polk Audio LSiM707 Bedienungsanleitung

Polk Audio

Polk Audio LSiC Bedienungsanleitung

Polk Audio

Polk Audio RM20 Bedienungsanleitung

Polk Audio

Polk Audio LSi 25 Bedienungsanleitung

Polk Audio

Polk Audio RTi A1 Bedienungsanleitung

Polk Audio

Polk Audio Blackstone TL1 Bedienungsanleitung

Polk Audio

Polk Audio Atrium 55W Bedienungsanleitung

Polk Audio

Polk Audio Atrium 45P Bedienungsanleitung

Polk Audio

Polk Audio VM30 Bedienungsanleitung

Polk Audio

Polk Audio R15 Bedienungsanleitung

Polk Audio

Polk Audio LC60i Merkblatt

Polk Audio

Polk Audio RTi Series Bedienungsanleitung

Polk Audio

Polk Audio OWM3 Bedienungsanleitung

Polk Audio

Polk Audio omni s6 Bedienungsanleitung

Polk Audio

Polk Audio LC265i Bedienungsanleitung

Polk Audio

Polk Audio AM3112A Bedienungsanleitung

Polk Audio

Polk Audio VM20 Bedienungsanleitung

Polk Audio

Polk Audio RM50T Bedienungsanleitung

Polk Audio

Polk Audio TSi TSi 500 Bedienungsanleitung

Polk Audio

Polk Audio Atrium 4 Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung