Poly Focus Room Kit Bedienerhandbuch

Andere Handbücher für Focus Room Kit

1

Dieses Handbuch passt für folgende Modelle

1

Inhaltsverzeichnis

Andere Poly Konferenzsystem Handbücher

Beliebte Konferenzsystem Handbücher anderer Marken

Kramer

Kramer VIA GO Bedienungsanleitung

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Bedienungsanleitung

Sony

Sony PCS-I150 Bedienungsanleitung

Middle Atlantic Products

Middle Atlantic Products VTC Series Bedienungsanleitung

AVT

AVT MAGIC AC1 Go Bedienungsanleitung

Prentke Romich Company

Prentke Romich Company Vanguard Plus Leitfaden

Speakerbus

Speakerbus iD 712 Bedienungsanleitung

Trelleborg

Trelleborg SafePilot CAT PRO Bedienungsanleitung

Sennheiser

Sennheiser ADN Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 7100 Bedienungsanleitung

AINA

AINA PTT Voice Responder Bedienungsanleitung

Yamaha

Yamaha ProjectPhone PJP-100H Bedienungsanleitung

vissonic

vissonic VLI Series Bedienungsanleitung

Panasonic

Panasonic KX-VC500 Bedienungsanleitung

Crestron

Crestron Mercury CCS-UCA-SMK Maßzeichnung

Tenveo

Tenveo ALL-IN-ONE Bedienungsanleitung

AXIWI

AXIWI AT-350 Bedienungsanleitung

AT&T

AT&T Spirit Communications System Installationsanleitung

Poly Documentation

Copyright © 2022, Plantronics, Inc. All rights reserved. No part of this document may be reproduced, translated into

another language or format, or transmitted in any form or by any means, electronic or mechanical, for any purpose,

without the express written permission of Polycom, Inc

6001 America Center Drive

San Jose, CA 95002

USA

Printed from Poly (http://documents.polycom.com)

Poly Focus Room Kit with Poly Studio

P15

Poly Focus Room Kit with Poly Studio P15

Setup instructions for the Poly Focus Room Kit.

Poly Focus Room Kit with Poly P15 Components

Note Before installing the Poly Studio Room Kit, you'll need the following:

•Required License for Microsoft Teams Rooms

•Microsoft Teams Rooms Account

•Poly GC8 touch controller

•10m USB-C to USB-A fiber optic cable

•Poly Studio P15 personal video bar

Additional Required Components

•Windows-based Conferencing PC running Microsoft Teams Rooms.

Poly offers a Dell or Lenovo PC, sold separately.

•HDMI cable(s)

•USB Keyboard and mouse (for installation only)

Printed from Poly (http://documents.polycom.com) Page 2

Required Tools

•Phillips #1 screwdriver

•Flathead screwdriver

Cable Management

•For Lenovo PC cable management, see the setup instructions included with the Lenovo

conferencing PC.

•For Dell PC cable management, see the Dell OptiPlex Micro Cable Cover user Guide.

Microsoft Teams Rooms User Information

For information on using Microsoft Teams Rooms, see Microsoft Teams Rooms help on the Microsoft

support website.

Poly Focus Room Kit with Poly P15 Cabling Diagram

This diagram includes the complete cabling for the Poly Focus Room Kit with Poly Studio P15.

Printed from Poly (http://documents.polycom.com) Page 3

For more information on Poly Studio P15 setup, see the Poly Studio P15 Quick Start Guide.

Connect the Poly GC8 to the Conferencing PC

Connect the cables to the Poly GC8 and connect the GC8 to the Conferencing PC.

Note Don’t plug in or power on any components until you’ve connected all cables to the Poly

GC8 and Conferencing PC.

Procedure

1Remove the bottom panel of the Poly GC8.

a. Loosen the bottom panel screw using a #1 Phillips-head screwdriver.

Printed from Poly (http://documents.polycom.com) Page 4

b. Press the rubber circles located on the left and right side of the bottom pane, l and slide the

panel up to remove it.

If the retaining screw causes the cover to seem stuck, try one of the following:

a. Turn the Poly GC8 so the bottom panel is facing down as you slide off the bottom panel.

b. Push up with one hand while using the screwdriver to turn the retaining screw

counterclockwise.

c. Using a flathead screwdriver, loosen the cable guard screw and remove the cable guard.

Printed from Poly (http://documents.polycom.com) Page 5

2Connect the cables to the Poly GC8.

a. Connect the USB-C connector of the supplied USB-A to USB-C fiber optic cable to the Poly

GC8.

b. Connect the power cable to the Poly GC8.

c. If you want to allow users to share content in a conference, connect the mini-HDMI

connector of the mini-HDMI to HDMI cable to the Poly GC8.

d. Connect the GC8 3.5 mm audio out connection to an audio output device.

Printed from Poly (http://documents.polycom.com) Page 6

3Reattach the cable guard and the bottom panel.

Printed from Poly (http://documents.polycom.com) Page 7

4Connect the USB-A connector of the USB-A to USB-C cable to the Conferencing PC.

For Lenovo PCs, secure the cable in the corresponding cable management slot. Do not force

the cable into a slot.

For Dell PCs, route the cable through the included Dell cable management bracket.

Connect the Poly Studio P15 to the Conferencing PC

Connect the Poly Studio P15 camera to the Conferencing PC to add a video camera and microphones.

Note The Poly Studio P15 personal video bar ships with a USB-C to USB-C cable. If a USB-C

connection is not available on the conferencing PC you can use a USB-C to USB-A

adapter compatible with USB 3.1.

Printed from Poly (http://documents.polycom.com) Page 8

Procedure

1Connect the USB-C to USB-C cable from the Poly Studio P15 to the Conferencing PC.

For Lenovo PCs, secure the cable in the corresponding cable management slot. Do not force

the cable into a slot.

For Dell PCs, route the cable through the included Dell cable management bracket.

2Connect the power cable to the Poly Studio P15.

Connect Monitors to the Conferencing PC

Connect one or two monitors to the system to display far-side video and content.

Note Don’t plug in or power on any components until you’ve connected all cables to the Poly

GC8 and Conferencing PC.

When using 4K monitors, the meeting room controls screen may appear on the monitor and not on the

Poly GC8 controller. When this happens, the Poly GC8 displays a blank screen. To resolve this issue,

Poly recommends using a 1080p limited EDID emulator with your 4K monitor. For additional installation

and configuration information, see the EDID manufacturer’s instructions.

Procedure

1Connect the one end of the HDMI cable to the monitor.

2For 4K monitors, install a 1080p limited EDID emulator to an available HDMI port on the

Conferencing PC.

3Do one of the following:

•Connect the other end of the HDMI cable to the Conferencing PC.

For Lenovo PCs, secure the cable in the corresponding cable management slot. Do not force

the cable into a slot.

Printed from Poly (http://documents.polycom.com) Page 9

For Dell PCs, route the cable through the included Dell cable management bracket.

•If you installed an EDMI emulator to the Conferencing PC, connect the other end of the

HDMI cable to the EDID emulator.

4To show far-side participants on one monitor and content on another, connect a second monitor.

Connect the Computer to the Network

Connect the Conferencing PC to your network using an Ethernet cable.

Note Microsoft Teams Room doesn’t support wireless video conferencing.

Procedure

•Using an Ethernet cable, connect the Conferencing PC to an Ethernet port.

Printed from Poly (http://documents.polycom.com) Page 10