Polycom Diagnostic Handset 1610 Bedienungsanleitung

1610

Handset

Diagnostic handset

1415 0200-ed2:14473_KT_1415 0200 ed1 06-12-2007 15:2

1Diagostic handset

2Charger

3Deployment

4Subscription of the Handset

5Menu Structure

5.1 Best Base Stations

5.2 Cur. Base

5.3 Free Chan.

6Possible Use of the Handset

1. The Diagnostic handset – The pro-

fessional diagnostic tool for fault fin-

ding and deployment of DECT

systems

Finding and correcting faults in a busi-

ness DECT system is a demanding task.

In order to make sure that you get to the

real problem, you have to be able to see

and control the interference that will exist

in a radio system transmitting in low-

power mode. The Diagnostic handset

contains various features which simplify

fault finding in existing DECT solutions

and the system is adjusted with an

accuracy, that makes it a highly recom-

mendable tool for setting up new DECT

installations.

1415 0200-ed2:14473_KT_1415 0200 ed1 06-12-2007 15:2

During normal operation, it takes approx-

imately 3 1/2 hours to charge the hand-

set from fully discharged to its full capa-

city. Place the handset in the charger.

When the handset is turned on, the dis-

play shows the charging status in line 3.

For correct charging be sure the room

temperature is between 0°C and 25°C.

Do not place the handset in direct sunlig-

ht. The battery has a built-in heat sensor

which will stop charging if the battery

temperature is too high.

It is necessary to recharge the battery

when the display shows “BATTERY

LOW”, or if it can not be turned on. The

LED flashes at a low frequency while

charging and lights constantly when the

charging is finished. The display goes

back to normal mode when fully charged.

When the handset is placed in the char-

ger it will not vibrate, and B-answer is

inactive. If the battery is fully discharged,

up to 10 min. may pass before charging

begins and the handset can be turned

on. When the charger begins the char-

ging, status is shown in the 3rd line of

the display and the LED flashes slowly.

1415 0200-ed2:14473_KT_1415 0200 ed1 06-12-2007 15:2

3. Deployment

The difficult part of installing a DECT

system is the question of where to place

the base stations. The placement of the

base stations is made during deployment

of the site. Deployment should only be

performed be trained technicians.

4. Subscription of the Handset

Follow the instruction of your DECT

system.

1415 0200-ed2:14473_KT_1415 0200 ed1 06-12-2007 15:2

5.1. Best Base Stations

In the “BEST BASES” menu it is possi-

ble to see how many base stations there

are in the air where the handset is pla-

ced. The base stations are sorted after

signal strength (RSSI).

In the RFPI/MASK menu the RFPI num-

ber is selected. The RFPI number is a

combination of the ARI and the RPN

(base number) in hex.

The handset can save information for 25

base stations.

ARI

The ARI number is a unique number for

each DECT system. There are 5 diffe-

rent classes: A, B, C, D, and E.(ETS 300

175-6)

Class A is for Home DECT:

Class B is for Business DECT:

ARI A

ARC ARD

A EMC FPN

3 16 17 = 36 bits

RFPI A

E PARI RPN

Y/N A EMC FPN RPN

1 3 16 17 3 = 40 bits

ARI B

ARC ARD

B EIC FPN FPS

3 16 8 4 = 31 bits

1415 0200-ed2:14473_KT_1415 0200 ed1 06-12-2007 15:2

Class C is for DECT local loop:

Class D is for DECT directly attached to

GSM:

Class E is for PP to PP direct communi-

cation:

ARI D

ARC ARD

D GOP FPN

3 20 8 = 31 bits

ARI E

ARC ARD

E FIL FPN

3 16 12 = 31 bits

RFPI D

E PARI NO

Y/N D GOP FPN RPN

1 3 20 8 8 = 40 bits

RFPI B

E PARI RPN

Y/N B EIC FPN FPS RPN

1 3 16 8 4 8 = 40 bits

RFPI C

E PARI RPN

Y/N C POC FPN FPS RPN

1 3 16 8 4 8 = 40 bits

ARI C

ARC ARD

C POC FPN FPS

3 16 8 4 = 31 bits

1415 0200-ed2:14473_KT_1415 0200 ed1 06-12-2007 15:2

EMC: Equipment Manufacturer’s Code

FPN: Fixed Part Number

RPN: Radio Fixed Part Number (Base

number)

EIC: Equipment Installer’s Code

FPS: Fixed Part Sub Number

POC: Public Operator Code

GOP: GSM Operator Code

FIL: Fill bits fixed 16-bit 0101... pattern

The ARI Number of a DECT System

The ARI number of a residential system

characterised by the octal number start-

ing with 0.

• Divide the octal number by 2.

The ARI number of a business system is

characterised by the octal number start-

ing with 0.

• Divide the octal number by 4.

The reason to this is because of an

ARI- Bs 31 bits have to be converted

into a 10 digit hex number (ETSI 300

175-6).

• After the division a convert into a hex

number is maked.

i.e.

10002001630o ➾100200E6h

To be able to write the hex values A B C

D E F you have to press the keys 1 2 3 4

5 6 down respectively. The keys will togg-

le between the value every 1.5 seconds.

RFPI E

E PARI NO

Y/N E FIL FPN RPN

1 3 16 12 8 = 40 bits

1415 0200-ed2:14473_KT_1415 0200 ed1 06-12-2007 15:2

Andere Polycom Mobilteil Handbücher

Polycom

Polycom SpectraLink 8450 Bedienungsanleitung

Polycom

Polycom SoundPoint IP 320 Bedienungsanleitung

Polycom

Polycom VVX 300 Bedienungsanleitung

Polycom

Polycom KIRK 4080 Bedienungsanleitung

Polycom

Polycom KIRK 4080 Bedienungsanleitung

Polycom

Polycom KIRK 4020 Bedienungsanleitung

Polycom

Polycom KIRK 5020 Bedienungsanleitung

Polycom

Polycom VVX 300 Bedienungsanleitung

Polycom

Polycom STRATA CIX 8002 Bedienungsanleitung

Polycom

Polycom KIRK 4020 Technisches Datenblatt

Polycom

Polycom VVX 500 series Bedienungsanleitung

Polycom

Polycom KIRK KIRK 4040 Bedienungsanleitung

Polycom

Polycom PENNNET 650 Bedienungsanleitung

Polycom

Polycom VVX D60 Bedienungsanleitung

Polycom

Polycom Polycom Butterfly Bedienungsanleitung

Polycom

Polycom SoundPoint IP 32 Series Bedienungsanleitung

Polycom

Polycom SpectraLink 6020 Montageanleitung

Polycom

Polycom KIRK 4020 Leitfaden

Polycom

Polycom KIRK KIRK 4040 Bedienungsanleitung

Polycom

Polycom KIRK 5020 Bedienungsanleitung

Polycom

Polycom SpectraLink 8440 Bedienungsanleitung

Polycom

Polycom SpectraLink 1725-36092-001 Bedienungsanleitung

Polycom

Polycom VVX-150 Series Benutzerhandbuch

Polycom

Polycom VVX-250 Series Benutzerhandbuch

Beliebte Mobilteil Handbücher anderer Marken

Swissvoice

Swissvoice ePure HD Bedienungsanleitung

Philips

Philips TD6736/BH051P Bedienungsanleitung

ASCOM

ASCOM I62 - Bedienungsanleitung

LG-Ericsson

LG-Ericsson LIP-9010 Bedienungsanleitung

GE 1583 Bedienungsanleitung

iiNet

iiNet Handset Bedienungsanleitung

ASCOM

ASCOM 9p23 Bedienungsanleitung

AT&T

AT&T DLP70110 Bedienungsanleitung

AirCell

AirCell ST 3100 Bedienungsanleitung

Eaton

Eaton HHIR-LCD-PROG Montageanleitung

Mitel

Mitel 112 Bedienungsanleitung

SBC

SBC SBC-381H Bedienungsanleitung

Mitel

Mitel 5602 Bedienungsanleitung

ASCOM

ASCOM d81 Messenger Montageanleitung

SpectraLink

SpectraLink 7522 Bedienungsanleitung

Avaya

Avaya L100 Series Anleitung zur Verwendung

ooma

ooma HD2 Handset Bedienungsanleitung

Yealink

Yealink IPW56 Bedienungsanleitung