Polycom SoundPoint IP 550 Bedienungsanleitung

UNIVERSITY INTEGRATED TELEPHONE SERVICE

september 2010

Poly om IP 550 Phone User Guide

Table of Content

SCHEMA ................................................................................................................................................. 3

BASIC PHONE FEATURES ......................................................................................................................... 4

PLACING CALLS ................................................................................................................................. 4

ANSWERING CALLS ............................................................................................................................ 4

ENDING CALLS .................................................................................................................................. 5

MUTING THE MICROPHONE .............................................................................................................. 5

HOLDING AND RESUMING CALLS ...................................................................................................... 5

REDIALLING NUMBERS ...................................................................................................................... 5

TRANSFERRING CALLS ...................................................................................................................... 6

FORWARDING CALLS ........................................................................................................................ 6

SPEED DIALLING ............................................................................................................................... 7

USING DO NOT DISTURB (DND) .................................................................................................... 7

VOICEMAIL ...................................................................................................................................... 7

VIEWING CALL LISTS ....................................................................................................................... 8

THREE PARTY CALLS ........................................................................................................................ 8

UNIVERSITY DIRECTORY ................................................................................................................... 8

CUSTOMIZING YOUR PHONE ................................................................................................................... 9

CONTACT DIRECTORY ....................................................................................................................... 9

ADJUSTING SPEAKER AND RINGER VOLUME ..................................................................................... 9

CUSTOMIZING RING TONES .............................................................................................................. 9

ON DEMAND SERVICES ........................................................................................................................ 11

CALL PICKUP GROUP ..................................................................................................................... 11

LINE MONITORING ......................................................................................................................... 11

MEET ME ...................................................................................................................................... 11

Go to Table of Content

2 / 11

SCHEMA

rif. ELEMENT DESCRIPTION

1 led “new messages” indi ates one or more new voi e mail messages

2 arrow keys

s roll through displayed information or option

sele t a field of displayed data

delete displayed data

3 feature keys a ess features of your phone

a ess to lo al dire tories and all lists

a ess to spe ial appli ations

allows onne tion with multiple other parties for a onferen e

transfer of urrent all to third party

dials most re ently dialled party

a ess lo al (your phone) and global (unitn) features

a ess voi e messages

Can els ringing and dire ts in oming alls to your voi e mail (if

a tivated)

4 mi rophone mute mutes audio transmission during alls and onferen e

5 headset allow you to pla e and re eive alls through an headset (optionally)

6 speaker-phone allow for hands-free ommuni ation during alls

7 hands-free mi rophone pi ks up audio during hands-free alls

8 volume keys adjust the volume of the handset, headset, speaker, and ringer

Go to Table of Content

3 / 11

9 dial pad provides the 10 digits, star key, the alphabeti hara ters, and spe ial

hara ters available in ontext-sensitive appli ations

10 hold holds an a tive all or resumes an held all

11 speakers for ringer and hands-free audio output

12 software keys automati ally labeled to identify their ontext-sensitive fun tions

13 graphi display shows information about alls/messages/soft-keys/time/servi es

14 line/speed dial key to a tivate the lines or speed dial that an be assigned to your phone

15 individual multi- olour LEDs display •solid green: a tive all in progress

•fast flashing green: in oming (outgoing) all

•flashing red: all on hold

•red: line busy (shared lines)

16 hook-swit h

BASIC PHONE FEATURES

PLACING CALLS

Using the handset:

•enter the number, pi k up the handset (if your phone has more than one line, pi k up the

handset, dial the number and sele t the desired line).

Using the speaker phone, with the handset on hook:

•press New Call, dial the number then press Dial (if your phone has more than one line,

press New Call, dial the number then press one of the assigned line keys)

•dial the number, press Dial (if your phone has more than one line, dial the number then

press one of the assigned line keys)

•dial the number, press (the all will be automati ally pla ed from the main line)

Using the optional headset, with the headset replaced :

•dial the number, press (the all will be automati ally pla ed from the main line)

•press New Call then press , dial the number then press Dial (if your phone has

more than one line, press New Call then press , sele t one of the assigned line keys

then dial the number and finally press Dial

•sele t one of the assigned line keys then press , dial the number and finally press

Dial

The engaged line key glows green.

During a call, you can alternate between modes by pressing the Headset or Speakerphone soft keys

or picking up the handset .

Go to Table of Content

4 / 11

ANSWERING CALLS

Using the speakerphone:

•press one of the following: , the flashing line key or the soft key Answer

Using the handset:

•pi k up the handset

Using optional headset:

•press

You can ignore a call by pressing Reject, the calling party receives a busy signal and the call

will be forwarded to the voice mail (if enabled .

ENDING CALLS

•repla e the handset

•press End Call

•press , if you are using the hands-free speaker

•press , if you are using the headset

MUTING THE MICROPHONE

•during a all, press

The exclusion of the microphone is indicated by a little red light and an icon in the upper left side

of the display. Mute applies to all modes. You can hear all the other parties while Mute is enabled,

but the other parties cannot hear you.

To turn off Mute, press again

HOLDING AND RESUMING CALLS

•during a all, press

•during a all, press Hold

The line key flashes red. While the call is on hold, you can place another call and then answer the

first call

To resume the call on hold:

Go to Table of Content

5 / 11

•press

•press Resume

•press the flashing line key

The line key glows green again

REDIALLING NUMBERS

To all the last number you dialled, press .

TRANSFERRING CALLS

To transfer an ongoing call:

1. during a all, press the Trnsfer or , the a tive all is pla ed on hold

2. pla e a all to the party to whom you want to transfer the all, then press Dial

3. hold until your all is answered by the se ond party, then press the Trnsfer again or

4. you an now repla e the handset

blind transfer (the transfer is unannoun ed):

1. during a all, press Trnsfer or , the a tive all is pla ed on hold

2. press Blind

3. enter the number of the party to whom you want to transfer the all

4. press Dial

5. you an now repla e the handset

FORWARDING CALLS

You an redire t ALL in oming alls to another phone number

To enable all forwarding, sele t the forwarding type you want to enable – type A:

1. from the idle s reen, press Forward

2. enter a number to forward alls to

3. press the OK

or - type B (if more than one line is onfigured):

1. sele t the line you wish to forward the all to

2. dial 999, followed by the number you wish to forward the all to (e.g.: 9991234 to enable

all forwarding to number 1234)

3. press Dial

A voice message confirms that call forwarding is enabled

Go to Table of Content

6 / 11

To disable all forwarding - type A:

1. from the idle s reen, press Forward

2. dial “0”

3. press OK

or - type B (if more than one line is onfigured):

1. sele t the key orresponding to the line for wi h you to disable all forwarding

2. dial 999 followed by 0 (e.g.: 9990 to disable all forwarding on the sele ted line)

3. press OK

A voice message confirms that call forwarding is disabled

If multiple lines are configured on your phone, you will select type A if you wish to forward calls

addressed to the main line only; you should select type B if you wish to redirect phone calls

addressed to the second line.

When call forwarding has been completed successfully, a call forward icon , followed by the

number to whom the call has been forwarded to, will appear on your phone display (the icon may

appear with up to 30 seconds delay

SPEED DIALLING

To qui kly dial a onta t, use the onta t’s speed dial index number, or press the onta t’s speed

dial key

Using a speed dial index number:

•Press the Up arrow , and then enter the onta t’s speed dial index number

To add or edit a speed dial index number for a onta t see the se tion Updating Conta t Dire tory

Using a speed dial key:

•press the desired onta t’s speed dial key (line key) on the top-left of the phone

To assign a speed dial key, press and hold an unassigned line key. Then enter the onta t

information and press the soft key Save

USING DO NOT DISTURB (DND)

To enable/disable Do Not Disturb (DND)

•press the soft key DND

•press

If multiple lines are onfigured on your phone, DND an be enabled just on sele ted lines or on all

lines:

•press DND or then Set All or Clear All to enable or disable DND on all

lines

Go to Table of Content

7 / 11

•to enable on a single line, sele t the line (using the arrow keys), press the Select soft key

then press Enable or Disable

When DND is enabled, flashes on the screen and the line appears engaged. If enabled, calls are

forwarded to the Voicemail, or to the number set as “Call Forwarding on Busy” (this setting is

accessible from the WEB only .

Note: if the phone is reset, all DND settings are disabled.

By using the first mode, DND will be enabled on all lines. The second mode must by used if you

wish to enable on just one or more selected lines.

VOICEMAIL

A voi email i on on the phone s reen , a flashing red line key, and a stutter dial tone in pla e of the

normal dial tone indi ate one or more new voi e mail messages

e.g.: (1/3)  you have 3 messages, one is a new message

To listen to voi e messages:

1. press (if multiple lines are onfigured on your phone, sele t the line to retrieve

messages from)

2. follow the voi e prompts

The number of messages on your display is updated with up to 30 seconds delay, the tone and the

flashing light are immediate.

VIEWING CALL LISTS

Short uts:

•missed alls: down arrow

•received alls: left arrow

•placed alls: right arrow

Sele t a all from any list and do the following:

•to place a all press Dial

•to change the phone number before dialling, press Edit

•to remove the all from the list, press More → Clear

•to store the onta t in your Conta t Dire tory, press More → Save

•to view information about the all (date/time), press More → Info

or:

•press → 1. Features... → 4. Call Lists... → 1. Missed Calls... [2. Received

calls... / 3. Placed calls... / 4. Clear]

•use the soft keys listed above

Go to Table of Content

8 / 11

THREE-PARTY CALLS

You an add a third party to a onversation. During a all:

1. sele t the Confrnc soft key or press (the all is pla ed on hold);

2. all the se ond party (the ommuni ation is now with the se ond parti ipant only)

3. press the Confrnc soft key again or press . You are urrently in a onferen e all.

The message Active: Conference is displayed on your phone s reen.

To add another party, repeat this pro edure.

Using the Manage soft key you an add a new party as well as mute, hold, or remove one of the

parti ipants. You an also view information about a sele ted party.

UNIVERSITY DIRECTORY

1. press Directory or

2. sele t the voi e 2. University Directory...

Simple sear h:

3. type the sear h string (e.g.: first or last name)

4. press Submit

5. sele t the onta t from the list and press or Dial to all

Advan ed sear h:

3. press AdvFind → use fields First Name / Last Name / Phone to sear h by

name/Surname/phone number

4. press Submit

5. sele t the desired onta t from the list and press or Dial to all

CUSTOMIZING YOUR PHONE

CONTACT DIRECTORY

To add or edit a contact:

1. press , then sele t 1. Features... → 2. Contact Directory...

2. to add a onta t, press More and then Add.To edit a onta t, s roll to the onta t, and then

press Edit. Adding or editing information about a onta t require the Conta t field as the

only field required (the onta t's phone number)

3. press Save.

To search for a contact in the local contact directory:

1. press , then sele t 1. Features... → 2. Contact Directory...

2. press More and then Search, omplete the fields and press Search again.

Go to Table of Content

9 / 11

To add or edit a speed dial index for an existing contact:

1. press , then sele t 1.Contact Directory...

2. use the arrow keys to highlight the onta t, the press the Edit soft key

3. lo ate the item “Speed Dial Index:” and assign the desired index

4. press Save or Cancel to a ept or an el hanges

5. press to return the idle display

ADJUSTING SPEAKER AND RINGER VOLUME

To change the incoming ring tone:

During a all press, + or –

To change the ringer volume:

When the phone is in the idle state, press + or –

You can also prevent your phone from ringing (see the Using Do Not Disturb (DND section or

you can choose a silent ring for your phone (see the Customizing ring tones section .

CUSTOMIZING RING TONES

To change the incoming ring tone:

1. press , and then sele t 3. Settings... → 1. Basic...→ 4. Ring Type...

2. if the phone has multiple lines, sele t the line you wish to modify, then s roll to the ring

type you want; to hear the ring type before you sele t it, press Play

3. press Select

To set a ring tone for a contact:

1. press → 1. Contact Directory...

2. sear h for the onta t (see the updating onta t dire tory se tion)

3. press the soft key Edit and then s roll to Ring Type

4. enter a number that orresponds to the ring type you want

5. press the soft key Save

1. press , then sele t 1. Features... → 2. Contact Directory...

2. sear h for the onta t (see the To add or edit contact section)

3. press Edit and then s roll to Ring Type:

4. enter a number that orresponds to the ring type you want

5. press Save

Go to Table of Content

10 / 11

Andere Handbücher für SoundPoint IP 550

Inhaltsverzeichnis

Andere Polycom IP-Telefon Handbücher

Polycom

Polycom VVXD60 Bedienungsanleitung

Polycom

Polycom CX500 Lync Edition Bedienungsanleitung

Polycom

Polycom VVX 411 Bedienungsanleitung

Polycom

Polycom VVX 310 Bedienungsanleitung

Polycom

Polycom VVX 500 series Bedienungsanleitung

Polycom

Polycom SoundPoint IP 500 Bedienungsanleitung

Polycom

Polycom SoundPoint IP 501 Bedienungsanleitung

Polycom

Polycom SoundPoint IP 550 Bedienungsanleitung

Polycom

Polycom VVX 500 series Bedienungsanleitung

Polycom

Polycom SoundPoint Pro SE-225 Bedienungsanleitung

Polycom

Polycom SoundPoint IP 550 Bedienungsanleitung

Polycom

Polycom VVX-150 Series Montageanleitung

Polycom

Polycom VVX 450 Bedienungsanleitung

Polycom

Polycom VVX 201 Bedienungsanleitung

Polycom

Polycom VVX 500 series Installationsanleitung

Polycom

Polycom KIRK 6020 Bedienungsanleitung

Polycom

Polycom CX700 Bedienungsanleitung

Polycom

Polycom VVX 300 Bedienungsanleitung

Polycom

Polycom VVX 250 Montageanleitung

Polycom

Polycom SoundPoint IP 331 Bedienungsanleitung

Polycom

Polycom VVX 300 Bedienungsanleitung

Polycom

Polycom VVX410 Bedienungsanleitung

Polycom

Polycom SoundPoint IP 550 Bedienungsanleitung

Polycom

Polycom VVX410 Bedienungsanleitung

Beliebte IP-Telefon Handbücher anderer Marken

Alcatel

Alcatel 4028 Bedienungsanleitung

Cisco

Cisco SPA-500 Series Bedienungsanleitung

Proximus

Proximus Maestro 3016 IP Bedienungsanleitung

Fanvil

Fanvil X4 Bedienungsanleitung

Cisco

Cisco 7962 Bedienungsanleitung

Snom

Snom 320 Bedienungsanleitung

Yealink

Yealink Yealink SIP-T46G Bedienungsanleitung

Avaya

Avaya 4625SW Bedienungsanleitung

Yealink

Yealink SIP-T52S Bedienungsanleitung

Nortel

Nortel 1140E Bedienungsanleitung

Nexotek

Nexotek NT-P500 Bedienungsanleitung

Avaya

Avaya Integral 5 R3.0 Bedienungsanleitung

GE 28320EE2 - Dect 6.0 InfoLink 2 Bedienungsanleitung

Avaya

Avaya 4600 Series Service-Handbuch

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Bedienungsanleitung

Nortel

Nortel i2050 Bedienungsanleitung

Fiberme

Fiberme FAP260 Series Bedienungsanleitung

Meridian

Meridian M5009 Bedienungsanleitung