Polycom VVX 3 Series Bedienungsanleitung

Polycom VVX101, 201, 3xx, 4xx, 50x, 60x

manual

A. General information

1. Introduction

Welcome!

This manual helps you to optimize the usage of the IP telephone in combination with the PBX. Please

use this manual at initial operation. Some features differ from the features described in the

manufacturer's documentation.

The following pages describe the Polycom VVX models.

VVX 101

VVX 201

VVX 311

VVX 411

VVX 501

VVX 601

Expansion module (max. 3)

available for VVX 300-600

We hope you enjoy using the telephones!

2. Used symbols

Type Icon Description

Notice Important information and notices that you

have to pay attention to.

Hint Useful hints that provide additional

information.

Action - is marked with a dash

Result of an

action ⇒ is marked with an arrow

List

•

is marked with a bullet point

B. Security

1. Notes

Please note that the video functionality is not supported.

Please note that uaCSTA (CTI) is available from formware 6.0.0.

The device was produced in accordance with the most common security standards. Nevertheless,

note the safety guidelines in order to use the device securely. Please note the following safety

guidelines to lower risk of burning, electric shocks, and similar risks.

General guidelines

1. Keep the device dry and clean at transport, storage, and usage.

2. Avoid collisions and drops of the device at transport, storage, and usage.

3. Do not open the device case and do not try to repair the device on your own.

Guidelines for usage and operation

1. Check whether the power supply voltage is in accordance with the device's voltage.

2. Pay attention to dry hands before using a cable.

3. Do not spill liquids on the device.

Guidelines for cleaning

1. Disconnect and unplug the device from the power supply before cleaning.

2. Use a soft, dry, antistatic cloth to clean the device.

Please find instructions on operation in the manufacturer's manual.

2. Encryption

You have the option of voice encrypting (SRTP) your telephone calls. You can activate this function

for your customer account via the administration portal at any time.

Activation of this function is subject to fees.

- Activate the function on the administration portal.

- Restart all telephones. Restarting may take a few minutes. During a conversation a lock icon on

the telephone display indicates encryption is activated.

⇒ The active call is now encrypted.

You can activate the function Voice Traffic encryption (SRTP) on the administration

portal under ADMINISTRATION / Profile.

C. Initial Operation

1. Requirements & Information

In order to use this IP telephone with your telephone system you will need a sound

broadband connection.

If you only have a single circuit plug available (e. g. in home offices) but would like to

access the Internet with your laptop while using the phone, connect the laptop to the

circuit plug on the phone.

This feature is not available on Polycom VVX 101 models.

2. Adding an extension

All telephones you receive are preconfigured and connected to the telephone system.

Find further information on how to install an extension in the administration portal

manual.

D. Operation

1. Basic Functions

1.1 Overview of Keys

Below you will see an overview over all keys of the respective models.

Polycom VVX 101 / 201

Polycom VVX 311 / 411

Pos. Description

1 USB port

2 Message Waiting Indicator

3 Line keys

4 Home key

5 Soft key

6 Navigation keys/ select key

7 Headset key

8 Speakerphone key

9 Speakerphone key

10 Volume key

11 Microphone

12 Hold

13 Message

14 Transfer

15 Dialpad

16 Speaker

17 Reversible tab (for wallmount installation)

18 Hookswitch

19 Security slot

Polycom VVX 501 / 601

Pos. Description

1 USB port

2 Message Waiting Indicator

3 Home/line key

4 Home/line key

5 Headset key

6 Speakerphone key

7 Mute key

8 Volume keys

9 Microphone

10 Dialpad

11 Speaker

12 Reversible tab

1.2. Keys in Detail

Key Description

You can use the navigation keys to steer

through the menu. On the initial page:

Down: Menu

Up: History

Left: Telephone settings

Right: Directory search

Adjusts the speaker's and telephone's volume

Mutes the microphone

Headset

Speaker

Transfer*

Hold conversation*

* not available for

Polycom VVX 501 & 601

1.3. Outgoing Call

Entering the extension number is sufficient when performing an internal call. If you

choose to perform an external call, you have dial the exchange identification code (e.g.

"9" for UK) prior to the external number.

You have the following options to perform an outgoing call:

Receiver

- Pick up the receiver.

- Enter the telephone number.

- Confirm your call by pressing the Send soft key.

- End the conversation by pressing the soft key End Call or hanging up.

Alternative:

- Enter the telephone number.

- Pick up the receiver.

- End the conversation by pressing the End Call soft key or hanging up.

Speaker

- Press the speaker key to activate the speaker.

- Dial the telephone number.

- Confirm your call by pressing the Send soft key.

- End the conversation by pressing the soft key End Call.

Headset

- Activate the headset by pressing the headset key .

- Dial the telephone number.

- Confirm your call by pressing the Send soft key.

- End the conversation by pressing the soft key End Call.

1.4. Incoming Call

To answer an incoming call, you have the following options:

- Pick up the receiver or press the speaker key to answer an incoming call. Press the headset

key in order to answer with your headset.

- End the conversation by hanging up or by pressing the End Call soft key.

1.5. Call Waiting, Toggle & Hold a Call

Call Waiting

The display of the telephone sends out a double knocking sound as soon as a second call comes in

during an active conversation.

You have the following options:

- You can take the incoming call by pressing the Answer soft key and set the active conversation on

hold.

- You can reject the incoming call by pressing the soft key Reject.

- You can transfer the incoming call without taking it directly. Press the Transfer soft key or the

transfer key *.

Incoming calls can only knock, if the the Call waiting indication (CWI) for the extension is

activated. To enable CWI for your phone, select Call Waiting Indication in the menu

under Call Settings.

Hold a Call

- In order to hold an active call, press the Hold key or push the Hold button *.

- To take an incoming call during an active conversation, press the Answer soft key. To reject an

incoming call, press the Reject soft key. You can transfer incoming calls directly by pressing the

transfer button * or the Transfer soft key.

⇒ The active conversation is now on hold.

Currently, it is not possible to access the central directory during a call on hold.

Toggle

- To toggle between two callers, press the soft key Swap. You can further toggle between the

conversations using the navigation keys and confirm your choice by pressing the Resume soft key.

⇒ The active conversation is put on hold and the caller hears a waiting music.

1.6. Call Transfer

To transfer an incoming call, you have the following options:

Attended Transfer

- After taking the call, press the Transfer soft key.

- Now enter the extension number.

- Press Transfer.

- Announce the incoming call.

- To transfer the call, press the Transfer soft key, then you can hang up.

Unattended transfer

- Press the Transfer soft key during an active call.

- Enter the destination extension number and press the Transfer key.

Andere Handbücher für VVX 3 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Polycom IP-Telefon Handbücher

Polycom

Polycom SoundPoint IP 550 Gebrauchsanweisung

Polycom

Polycom SoundPoint IP 320 Bedienungsanleitung

Polycom

Polycom SoundPoint IP 335 Gebrauchsanweisung

Polycom

Polycom SoundPoint IP 330 Bedienungsanleitung

Polycom

Polycom SOUNDPOINT IP SIP 3.2.1 Bedienungsanleitung

Polycom

Polycom VVX 450 Bedienungsanleitung

Polycom

Polycom Seimens ROLMPhone 400 Bedienungsanleitung

Polycom

Polycom VVX 1500 Series Gebrauchsanweisung

Polycom

Polycom SoundPoint IP 650 Gebrauchsanweisung

Polycom

Polycom VVX 300 Bedienungsanleitung

Polycom

Polycom SoundPoint IP 331 Bedienungsanleitung

Polycom

Polycom SoundPoint IP 500 Bedienungsanleitung

Polycom

Polycom 500 Series Bedienungsanleitung

Polycom

Polycom SoundPoint IP 321 Bedienungsanleitung

Polycom

Polycom VVX 500 Leitfaden

Polycom

Polycom SoundPoint IP 550 Bedienungsanleitung

Polycom

Polycom VVX 150 Bedienungsanleitung

Polycom

Polycom VVX 310 Bedienungsanleitung

Polycom

Polycom 2200-12651-001 Bedienungsanleitung

Polycom

Polycom VVX 450 Bedienungsanleitung

Polycom

Polycom SoundPoint IP 670 Gebrauchsanweisung

Polycom

Polycom SoundPoint IP 450 Bedienungsanleitung

Polycom

Polycom VVX410 Gebrauchsanweisung

Polycom

Polycom IP 331 Bedienungsanleitung

Beliebte IP-Telefon Handbücher anderer Marken

Alcatel

Alcatel 4028 Bedienungsanleitung

Cisco

Cisco SPA-500 Series Bedienungsanleitung

Proximus

Proximus Maestro 3016 IP Bedienungsanleitung

Fanvil

Fanvil X4 Bedienungsanleitung

Cisco

Cisco 7962 Bedienungsanleitung

Snom

Snom 320 Bedienungsanleitung

Yealink

Yealink Yealink SIP-T46G Bedienungsanleitung

Avaya

Avaya 4625SW Bedienungsanleitung

Yealink

Yealink SIP-T52S Bedienungsanleitung

Nortel

Nortel 1140E Bedienungsanleitung

Nexotek

Nexotek NT-P500 Bedienungsanleitung

Avaya

Avaya Integral 5 R3.0 Bedienungsanleitung

GE 28320EE2 - Dect 6.0 InfoLink 2 Bedienungsanleitung

Avaya

Avaya 4600 Series Service-Handbuch

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Bedienungsanleitung

Nortel

Nortel i2050 Bedienungsanleitung

Fiberme

Fiberme FAP260 Series Bedienungsanleitung

Meridian

Meridian M5009 Bedienungsanleitung