Polycom VVX 500 Handbuch

Polycom VVX

Admin Guide

Schmooze Com Inc.

500, 600 & 1500

DND

HEADSET

HOLD

TRANSFER

CONF

SP PHONE

REDIAL

APP

DIR

MSG

ABC

GHI

JKL

MNO

PQRS

TUV

WXYZ

OPER

DEF

How To Find The IP Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Platform” option and press the “Select” button.

4. Scroll down to the “Phone” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see the IP Address.

How To Find The MAC Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Network” option and press the “Select” button.

4. Scroll down to the “Ethernet” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see

the MAC Address.

How To Set The Configuration Server

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select” button.

6. Scroll down to the “Network Configuration” option and press the

“Select” button.

7. Scroll down to the “Server Menu” option and press the “Select” button.

8. Pick the Server Type such as TFTP and set the Server Address and press the “Select” button.

The Server address would be the IP address of your PBX.

How To Factory Default

Quick Steps

1.Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select button”.

6. Scroll down to the “Reset to Default” option and press the “Select” button.

7. Scroll down to the “Format File System” option and press the “Select” button.

How To Find The IP Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Platform” option and press the “Select” button.

4. Scroll down to the “Phone” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see the IP Address.

How To Find The MAC Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Network” option and press the “Select” button.

4. Scroll down to the “Ethernet” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see

the MAC Address.

How To Set The Configuration Server

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select” button.

6. Scroll down to the “Network Configuration” option and press the

“Select” button.

7. Scroll down to the “Server Menu” option and press the “Select” button.

8. Pick the Server Type such as TFTP and set the Server Address and press the “Select” button.

The Server address would be the IP address of your PBX.

How To Factory Default

Quick Steps

1.Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select button”.

6. Scroll down to the “Reset to Default” option and press the “Select” button.

7. Scroll down to the “Format File System” option and press the “Select” button.

How To Find The IP Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Platform” option and press the “Select” button.

4. Scroll down to the “Phone” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see the IP Address.

How To Find The MAC Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Network” option and press the “Select” button.

4. Scroll down to the “Ethernet” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see

the MAC Address.

How To Set The Configuration Server

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select” button.

6. Scroll down to the “Network Configuration” option and press the

“Select” button.

7. Scroll down to the “Server Menu” option and press the “Select” button.

8. Pick the Server Type such as TFTP and set the Server Address and press the “Select” button.

The Server address would be the IP address of your PBX.

How To Factory Default

Quick Steps

1.Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select button”.

6. Scroll down to the “Reset to Default” option and press the “Select” button.

7. Scroll down to the “Format File System” option and press the “Select” button.

How To Find The IP Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Platform” option and press the “Select” button.

4. Scroll down to the “Phone” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see the IP Address.

How To Find The MAC Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Network” option and press the “Select” button.

4. Scroll down to the “Ethernet” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see

the MAC Address.

How To Set The Configuration Server

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select” button.

6. Scroll down to the “Network Configuration” option and press the

“Select” button.

7. Scroll down to the “Server Menu” option and press the “Select” button.

8. Pick the Server Type such as TFTP and set the Server Address and press the “Select” button.

The Server address would be the IP address of your PBX.

How To Factory Default

Quick Steps

1.Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select button”.

6. Scroll down to the “Reset to Default” option and press the “Select” button.

7. Scroll down to the “Format File System” option and press the “Select” button.

How To Find The IP Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Platform” option and press the “Select” button.

4. Scroll down to the “Phone” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see the IP Address.

How To Find The MAC Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Network” option and press the “Select” button.

4. Scroll down to the “Ethernet” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see

the MAC Address.

How To Set The Configuration Server

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select” button.

6. Scroll down to the “Network Configuration” option and press the

“Select” button.

7. Scroll down to the “Server Menu” option and press the “Select” button.

8. Pick the Server Type such as TFTP and set the Server Address and press the “Select” button.

The Server address would be the IP address of your PBX.

How To Factory Default

Quick Steps

1.Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select button”.

6. Scroll down to the “Reset to Default” option and press the “Select” button.

7. Scroll down to the “Format File System” option and press the “Select” button.

How To Find The IP Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Platform” option and press the “Select” button.

4. Scroll down to the “Phone” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see the IP Address.

How To Find The MAC Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Network” option and press the “Select” button.

4. Scroll down to the “Ethernet” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see

the MAC Address.

How To Set The Configuration Server

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select” button.

6. Scroll down to the “Network Configuration” option and press the

“Select” button.

7. Scroll down to the “Server Menu” option and press the “Select” button.

8. Pick the Server Type such as TFTP and set the Server Address and press the “Select” button.

The Server address would be the IP address of your PBX.

How To Factory Default

Quick Steps

1.Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select button”.

6. Scroll down to the “Reset to Default” option and press the “Select” button.

7. Scroll down to the “Format File System” option and press the “Select” button.

How To Find The IP Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Platform” option and press the “Select” button.

4. Scroll down to the “Phone” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see the IP Address.

How To Find The MAC Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Network” option and press the “Select” button.

4. Scroll down to the “Ethernet” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see

the MAC Address.

How To Set The Configuration Server

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select” button.

6. Scroll down to the “Network Configuration” option and press the

“Select” button.

7. Scroll down to the “Server Menu” option and press the “Select” button.

8. Pick the Server Type such as TFTP and set the Server Address and press the “Select” button.

The Server address would be the IP address of your PBX.

How To Factory Default

Quick Steps

1.Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select button”.

6. Scroll down to the “Reset to Default” option and press the “Select” button.

7. Scroll down to the “Format File System” option and press the “Select” button.

How To Find The IP Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Platform” option and press the “Select” button.

4. Scroll down to the “Phone” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see the IP Address.

How To Find The MAC Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Network” option and press the “Select” button.

4. Scroll down to the “Ethernet” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see

the MAC Address.

How To Set The Configuration Server

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select” button.

6. Scroll down to the “Network Configuration” option and press the

“Select” button.

7. Scroll down to the “Server Menu” option and press the “Select” button.

8. Pick the Server Type such as TFTP and set the Server Address and press the “Select” button.

The Server address would be the IP address of your PBX.

How To Factory Default

Quick Steps

1.Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select button”.

6. Scroll down to the “Reset to Default” option and press the “Select” button.

7. Scroll down to the “Format File System” option and press the “Select” button.

How To Find The IP Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Platform” option and press the “Select” button.

4. Scroll down to the “Phone” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see the IP Address.

How To Find The MAC Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Network” option and press the “Select” button.

4. Scroll down to the “Ethernet” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see

the MAC Address.

How To Set The Configuration Server

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select” button.

6. Scroll down to the “Network Configuration” option and press the

“Select” button.

7. Scroll down to the “Server Menu” option and press the “Select” button.

8. Pick the Server Type such as TFTP and set the Server Address and press the “Select” button.

The Server address would be the IP address of your PBX.

How To Factory Default

Quick Steps

1.Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select button”.

6. Scroll down to the “Reset to Default” option and press the “Select” button.

7. Scroll down to the “Format File System” option and press the “Select” button.

Andere Handbücher für VVX 500

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Polycom IP-Telefon Handbücher

Polycom

Polycom VVX101 Bedienungsanleitung

Polycom

Polycom SoundPoint IP 300 Bedienungsanleitung

Polycom

Polycom CX500 Lync Edition Bedienungsanleitung

Polycom

Polycom PENNNET 650 Bedienungsanleitung

Polycom

Polycom Soundpoint IP 301 Bedienungsanleitung

Polycom

Polycom SoundPoint IP 300 Bedienungsanleitung

Polycom

Polycom Soundpoint IP 301 Bedienungsanleitung

Polycom

Polycom SoundPoint IP 300 Kurzanleitung

Polycom

Polycom SoundPoint IP 450 Bedienungsanleitung

Polycom

Polycom VVX 500 series Bedienungsanleitung

Polycom

Polycom SoundPoint IP 300 Handbuch

Polycom

Polycom VVX-250 Series Gebrauchsanweisung

Polycom

Polycom SoundPoint IP 450 Bedienungsanleitung

Polycom

Polycom VVX 500 series Bedienungsanleitung

Polycom

Polycom VVX 500 series Bedienungsanleitung

Polycom

Polycom VVX 150 Handbuch

Polycom

Polycom VVX 310 Gebrauchsanweisung

Polycom

Polycom SoundPoint IP 550 Bedienungsanleitung

Polycom

Polycom VVX410 Bedienungsanleitung

Polycom

Polycom SoundStation IP 6000 Gebrauchsanweisung

Polycom

Polycom VVX 250 Bedienungsanleitung

Polycom

Polycom SoundPoint 320 Bedienungsanleitung

Polycom

Polycom VVX 300 Montageanleitung

Polycom

Polycom VVX 201 Bedienungsanleitung

Beliebte IP-Telefon Handbücher anderer Marken

Alcatel

Alcatel 4028 Bedienungsanleitung

Cisco

Cisco SPA-500 Series Bedienungsanleitung

Proximus

Proximus Maestro 3016 IP Bedienungsanleitung

Fanvil

Fanvil X4 Bedienungsanleitung

Cisco

Cisco 7962 Bedienungsanleitung

Snom

Snom 320 Bedienungsanleitung

Yealink

Yealink Yealink SIP-T46G Bedienungsanleitung

Avaya

Avaya 4625SW Bedienungsanleitung

Yealink

Yealink SIP-T52S Bedienungsanleitung

Nortel

Nortel 1140E Bedienungsanleitung

Nexotek

Nexotek NT-P500 Bedienungsanleitung

Avaya

Avaya Integral 5 R3.0 Bedienungsanleitung

GE 28320EE2 - Dect 6.0 InfoLink 2 Bedienungsanleitung

Avaya

Avaya 4600 Series Service-Handbuch

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Bedienungsanleitung

Nortel

Nortel i2050 Bedienungsanleitung

Fiberme

Fiberme FAP260 Series Bedienungsanleitung

Meridian

Meridian M5009 Bedienungsanleitung