Polygroup Evergreen Classics AR-P20008A Bedienungsanleitung

MODEL #: AR-P20008A

TREE ASSEMBLY INSTRUCTIONS

3. Each tree section is numbered with a sticker. Please identify all sections before assembling.

4. Assemble the tree from bottom to the top. Start with the bottom section and remove the protective cap before inserting into the

assembled stand. Make sure the pole is firmly inserted and secured into the stand.

5. Continue by inserting the upper tree section(s) to the lower section(s) until inserting the tree top.

6. Allow branches to fall into place or gently pull up and out.When adjusting branches, be sure that all wires are free of branch hinges.

7. Connect the light strings as per the color labels indicated in Fig. B and insert green label adapter into the wall outlet, your entire

tree should now be lit.

NEED HELP?

DO NOT RETURN TO STORE. PLEASE VISIT US AT:

www.polygroupstore.com OR +1 (888) 919-0070

Fig. B - Tree and Light Assembly *Electrical Rating For The Tree

(For Indoor Use Only)

Input: AC 100-240V, 50/60Hz, 0.35A

Output: DC 29V 0.45A

Controller: 0.45A

Insert Green

Label Extension

Cord into Adapter

Plug Adapter

Into Wall

Outlet

1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.

2. Assemble the tree stand and place on a level surface. (See Fig. A)

TREE ASSEMBLY INSTRUCTIONS

Congratulations on purchasing your new tree from Polygroup®!

Carefully follow the instructions below on how to quickly and easily set up your new tree.

Fig. A - Tree Stand Assembly

Click

Pull apart the legs of the stand so that they

are snapped into an x-shape, place the tree

stand on a level surface.

To close the stand, press the metal button

and fold the legs together.

Control box

Foot Pedal

on/off switch

Tree top

Section 1

Section 2

Insert Red Label

Plugs Into Red

Labeled Extension Cord

8. Begin to shape the branches and tips working from the bottom to the top. Start with tips farthest from the pole and fan out

one to the right, one to the left and one at the center of the main stem. (See Fig. C)

9. After shaping the entire tree following the previous step, slightly upsweep all branch tips for a uniform look. Shift branches to

fill any gaps.Your Christmas tree is now complete and ready to be decorated.

For Pre-lit Trees, If The Tree Does Not Illuminate

1. Please check to make sure that all plugs are properly connected according to the color labels indicated in Fig.B and the

adapter is plugged into the wall outlet. Refer to assembly guide for instructions. (If the tree comes with a foot pedal, try

stepping on the on/off button).

2. Check for loose connection between light string plugs and extension cords.

Loose Hinge Pin

1. Extra hinge pins are included for repairing the hinges.

Place the branch into the slot of the bracket.

2. Insert a new hinge pin through the hole and secure

using the retainer washer. (See Fig. D)

TROUBLESHOOTING TIPS

Fig. D

STORAGE INSTRUCTIONS

1. Remove all ornaments and decorations. First unplug adapter from the wall outlet and then disconnect light extension cord

between each section of the tree.

2. Disassemble the tree from the top to the bottom. Start with the tree top and gently lift straight up to remove from section

below and fold all branches toward the pole.

3. In case of difficulty separating the tree pole (trunk), apply a small amount of lubricant at the joint and rotate the upper pole in

both directions. Lift up the upper pole again.

4. Continue by gently lifting straight up each section(s) from the section below and fold all branches toward the pole until the

bottom section is removed from the tree stand.

5. Carefully place all tree sections into shipping box and tape it shut.

6.When not in use, please store your tree in a cool, dry place away from sunlight.Exposing your tree to excessive heat or humidity

may damage your tree.

CAUTION:

To reduce the risk of fire and electric shock:

a) Use only the power supply that was provided with this product. Using a different adapter will damage the lights and may cause

fire, or electrical shock hazards.

b) Do not install on trees having needles, leaves or branch covering of metal or materials which look like metal.

c) Do not mount or support strings in a manner that can cut or damage wire insulation.

Press the selector button on the “Dual Color Light Controller” or “Remote Controller”

to select among: (1) CLEAR - MULTI: FADING (2) CLEAR: FADING

(3) CLEAR - MULTI: ALTERNATING (4) CLEAR: STEADY

(5) CLEAR - MULTI: SLOW FADING (6) MULTI: STEADY

(7) MULTI: FADING (8) COMBINATION

DUAL COLOR LIGHT CONTROLLER & REMOTE CONTROL

REMOTE CONTROL INSTRUCTIONS

1. Remove the insulation tab.

2. Press either selector button and wait for a second to enjoy light effects in the following sequence

(see DUAL COLOR LIGHT CONTROLLER & REMOTE CONTROL).

Remote

Control Light

Controller

Selector Button

Insulation Tab

Each tree includes hinge pins/washers.

If extra parts are needed, please contact our customer service center.

SPARE PARTS

For any questions, assistance, or missing parts, Do Not Return To Place Of Purchase. Please contact us at +1 (888) 919-0070

or visit our website at www.polygroupstore.com. One of our customer service representatives will be happy to assist you.

CUSTOMER SERVICE FOR CHRISTMAS TREES

Tree ID#:

Tree UPC#:

Store Purchased:

Specify Problem:

Customer Name:

Address:(No P.O. Boxes)

City & State:

Zip Code:

Day Phone:

Date Purchased:

TREE ID# IS LOCATED ON END PANEL OF BOX.TREE ID# IS REQUIRED WHEN REQUESTING REPLACEMENT PARTS.

WARNING

1. Dispose used battery properly. observe local regulations regarding disposal of hazardous waste.

2. Ensure the batteries are installed correctly with regard to polarity (+ and -).

3. This product is powered by a lithium battery. Due to their small size, lithium batteries can easily be swallowed by children.

Ingestion of such batteries has been known to cause death.

4. Do not expose light set to moisture.

5. Remove batteries when not used for an extended period of time, or when depleted.

6. Clean the battery contacts prior to battery installation.

7. The external flexible cable or cord of this luminaire cannot be replaced; If the cord is damaged, the luminaire shall be destroyed.

8. Dispose of used batteries properly, and local laws and regulations regarding the disposal of hazardous waste.

9. Use only CR2032 batteries for the remote controller.

10. Do not dispose of batteries in fire. Batteries may explode or leak.

11. This is a lithium battery which if swallowed has been known to cause death.

12. Small parts, keep batteries out of reach of children.

BATTERY REPLACEMENT

1. Loosen the screw of the battery cover with a screwdriver (not included).

2. Replace the used battery with a new CR2032 button cell battery (not included). Make sure that the battery is installed

with the correct polarity (+ and -).

3. Retighten the screw to close and secure the battery cover.

Cover

Battery

CR2032

Andere Polygroup Künstlicher Kiefernbaum Handbücher

Polygroup

Polygroup TG76M2T20D08 Bedienungsanleitung

Polygroup

Polygroup TG60EH117X20 Bedienungsanleitung

Polygroup

Polygroup TGC0M6010C00 Bedienungsanleitung

Polygroup

Polygroup TG70CN207C07 Bedienungsanleitung

Polygroup

Polygroup TG76M4244C01 Bedienungsanleitung

Polygroup

Polygroup TG70P3D88L14 Bedienungsanleitung

Polygroup

Polygroup TV70IN303C06 Bedienungsanleitung

Polygroup

Polygroup TG76P4371C02 Bedienungsanleitung

Polygroup

Polygroup EZ Connect Color Blast TG66P4826P00 Bedienungsanleitung

Polygroup

Polygroup ENCHANTED FOREST TG70M3ANYP01 Bedienungsanleitung

Polygroup

Polygroup TG70M3L21C03 Bedienungsanleitung

Polygroup

Polygroup TV50M3AVBL00 Bedienungsanleitung

Polygroup

Polygroup DAP-T-116PA/100CL-B Bedienungsanleitung

Polygroup

Polygroup TG90P3499C00 Bedienungsanleitung

Polygroup

Polygroup TGA0M4865C00 Bedienungsanleitung

Polygroup

Polygroup TG76P4223L21 Bedienungsanleitung

Polygroup

Polygroup TG90M3L21C02 Bedienungsanleitung

Polygroup

Polygroup TG76P4751P02 Bedienungsanleitung

Polygroup

Polygroup Alexander Bedienungsanleitung

Polygroup

Polygroup TG50P4B42K05 Bedienungsanleitung

Polygroup

Polygroup TG76M3AE4L02 Bedienungsanleitung

Polygroup

Polygroup Home Heritage TV22M3M26L02 Bedienungsanleitung

Polygroup

Polygroup TV50P3907C00 Bedienungsanleitung

Polygroup

Polygroup TV40DY281C03 Bedienungsanleitung

Beliebte Künstlicher Kiefernbaum Handbücher anderer Marken

Trim a Home

Trim a Home TY-S6-250L Bedienungsanleitung

Sears

Sears Donner & Blitzen M44814 Bedienungsanleitung

BETHLEHEM LIGHTING

BETHLEHEM LIGHTING 6.5’ Tinsel Tree Bedienungsanleitung

Home Accents Holiday

Home Accents Holiday TG76P3D93L08 Bedienungsanleitung

Costway

Costway CM23595US Bedienungsanleitung

Home Accents Holiday

Home Accents Holiday TG76P4C15D03 Bedienungsanleitung

Holiday Living

Holiday Living TV40EH339C01 Bedienungsanleitung

CASARIA

CASARIA DBGB001 Bedienungsanleitung

Alpine

Alpine CRD100L-WT Bedienungsanleitung

Home Accents Holiday

Home Accents Holiday TG76M3W89C00 Bedienungsanleitung

CASARIA

CASARIA 104006 Bedienungsanleitung

Alpine

Alpine CRD111S-GN Bedienungsanleitung

Home Accents Holiday

Home Accents Holiday 1001540584 Bedienungsanleitung

Home Accents Holiday

Home Accents Holiday TG90P3F28D00 Bedienungsanleitung

Williams-Sonoma

Williams-Sonoma TG46P4368L01 Bedienungsanleitung

Trim a Home

Trim a Home 7.5 ft. Berkshire Fir Tree Bedienungsanleitung

Home Accents Holiday

Home Accents Holiday 1004363936 Bedienungsanleitung

Polytree

Polytree TG66EH148C17 Bedienungsanleitung