Polygroup TG76P4617P06 Bedienungsanleitung

Top view Side view

Fig. C

MODEL #: TG76P4617P06

*Electrical Rating For The Tree

(For Indoor Use Only)

Input: 120VAC, 60Hz, 0.25A Max.

Output: 29V DC 0.45A

Fig. B - Tree and Light Assembly

1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.

2. Assemble the tree stand and place on a level surface. (See Fig. A)

TREE ASSEMBLY INSTRUCTIONS

3. Each tree section is numbered with a sticker. Please identify all sections before assembling.

4. Assemble the tree from bottom to the top. Start with the bottom section and remove the protective cap before inserting into

the assembled stand. Make sure the pole is firmly inserted and secured into the stand.

5. Continue by inserting the upper tree section(s) to the lower section(s) until inserting the tree top.

6. Allow branches to fall into place or gently pull up and out.When adjusting branches, be sure that all wires are free of branch hinges.

7. Just plug the adaptor (connecting with the tree power cord) into the wall outlet (See Fig. B), your entire tree should now be lit.

If some bulbs do not light or flickers, search for any loose plugs and/or broken, loose or missing bulbs. Replace bulbs promptly

in order to maintain the performance and life expectancy of your pre-lit tree.

8. Begin to shape the branches and tips working from the bottom to the top.Start with tips farthest from the pole and fan out one

to the right, one to the left and one at the center of the main stem. (See Fig. C)

Tree top

Section 2

Section 1

Please scan code to

learn how to shape

and set up your tree

Control box Foot Pedal

on/off Switch

NEED HELP?

DO NOT RETURN TO STORE. PLEASE VISIT US AT:

www.polygroupstore.com OR 1-888-919-0070

Congratulations on purchasing your new tree from Polygroup®!

This tree comes with Quick Set® technology-Set up and light up your tree in less than 10 minutes!

Carefully follow the instructions below on how to quickly and easily set up your new tree.

Fig. A - Tree Stand Assembly

Unfold the legs and lay the

stand in a flat area.Then slide

the locking disc downward and

snap into place.

Insert Green

Label Extension

Cord into Adaptor

Adaptor

To Be Plugged

Into Wall

Outlet

Do Not Tamper

Internal Parts

Open the

protective

cap

Do Not Tamper

Internal Parts

Open the

protective

cap

TROUBLESHOOTING TIPS

SPARE PARTS

For Pre-lit Trees, If The Tree Does Not Illuminate

1. Please check to make sure that all plugs are properly connected and adaptor is plugged into the wall outlet. (If the tree comes

with a foot pedal, try stepping on the on/off button).

2.Turning the poles gently to make sure pole to pole are connected into place.

3. Check for loose connection between light string plugs and extension cords.

4. Please check for loose, broken or missing light bulbs and replace as needed.

1. Extra hinge pins are included for repairing the hinges. Place the branch

into the slot of the bracket.

2. Insert a new hinge pin through the hole and secure using the retainer

washer.(See Fig. E)

Each tree includes hinge pins/washers, and for pre-lit trees spare bulbs are also included. If extra parts are needed, please contact

our customer service center.

Loose Hinge Pin

Fig.E

1. Use only the adaptor supplied with this product. Using a different adaptor will damage the lights and cause fire, electrical

shock hazards.

2. FOR INDOOR USE ONLY.

WARNING

HOW TO USE THE COLOR SHOW CONTROLLER:

Press the selector button on the “Color Show Light Controller” to select among:

(1) CLEAR-COLOR SHOW LIGHTS; (2) CLEAR LIGHTS;

(3) COLOR - SHOW LIGHTS; (4) TURN OFF BOTH LIGHTS. Light

Controller

Selector

Button

9. After shaping the entire tree following the previous step, slightly upsweep all branch tips for a uniform look. Shift branches to fill

any gaps.Your Christmas tree is now complete and ready to be decorated.

STORAGE INSTRUCTIONS

1. Unplug the power adaptor from the wall outlet first and then remove all ornaments and decorations.

2. Disassemble the tree from the top to the bottom. Start with the tree top and gently lift straight up to remove from section

below and fold all branches toward the pole.

3. Continue by gently lifting straight up each section(s) from the section below and fold all branches

toward the pole until the bottom section is removed from the tree stand.Cover the cap on the poles

to avoid damaging the internal parts. (See Fig. D)

4. Carefully place all tree sections into shipping box and tape it shut.

5.When not in use, please store your tree in a cool, dry place away from sunlight. Exposing your tree to

excessive heat or humidity may damage your tree.

6. Keep out of reach of pets and children.

Fig. D

CUSTOMER SERVICE FOR CHRISTMAS TREES

For any questions, assistance, or missing parts, Do Not Return To Place Of Purchase.Please contact us at 1-888-919-0070

or visit our website at www.polygroupstore.com. One of our customer service representatives will be happy to assist you.

TREE ID# IS LOCATED ON END PANEL OF BOX.TREE ID# IS REQUIRED WHEN REQUESTING REPLACEMENT PARTS.

Customer Name:

Address:(No P.O. Boxes)

City & State:

Zip Code:

Day Phone:

Date Purchased:

Tree ID#:

Tree UPC#:

Store Purchased:

Specify Problem:

Thank you for purchasing a Polygroup product.

Please recycle the following.

(Note: Contents of bag must be removed prior to recycling)

Small Plastic BagBubble Wrap

LDPE

Andere Polygroup Künstlicher Kiefernbaum Handbücher

Polygroup

Polygroup TG7000MZAC00 Bedienungsanleitung

Polygroup

Polygroup TG76P4870C00 Bedienungsanleitung

Polygroup

Polygroup AR-P17004 Bedienungsanleitung

Polygroup

Polygroup TG60M2K04C00 Bedienungsanleitung

Polygroup

Polygroup TZ70M3O26X00 Bedienungsanleitung

Polygroup

Polygroup TV70M3AVBL00 Bedienungsanleitung

Polygroup

Polygroup TG76M4244L04 Bedienungsanleitung

Polygroup

Polygroup Home Heritage TG80P2763D00 Bedienungsanleitung

Polygroup

Polygroup TG76M3S45C01 Bedienungsanleitung

Polygroup

Polygroup TG76M4I41X00 Bedienungsanleitung

Polygroup

Polygroup TG76M3J72D02 Bedienungsanleitung

Polygroup

Polygroup TG76M3W48X02 Bedienungsanleitung

Polygroup

Polygroup TG70P4842D08 Bedienungsanleitung

Polygroup

Polygroup TG76P4724D03 Bedienungsanleitung

Polygroup

Polygroup TGC000NY1L03 Bedienungsanleitung

Polygroup

Polygroup TG7600NVQC28 Bedienungsanleitung

Polygroup

Polygroup ENCHANTED FOREST TG60M2Q94X00 Bedienungsanleitung

Polygroup

Polygroup TG70M4839C12 Bedienungsanleitung

Polygroup

Polygroup TG76M3AE4C00 Bedienungsanleitung

Polygroup

Polygroup TG66EH148C51 Bedienungsanleitung

Polygroup

Polygroup TG76M3M75D01 Bedienungsanleitung

Polygroup

Polygroup Home Heritage TV22M3M26L02 Bedienungsanleitung

Polygroup

Polygroup TG76P4861C00 Bedienungsanleitung

Polygroup

Polygroup TG76P3B17L03 Bedienungsanleitung

Beliebte Künstlicher Kiefernbaum Handbücher anderer Marken

Trim a Home

Trim a Home TY-S6-250L Bedienungsanleitung

Sears

Sears Donner & Blitzen M44814 Bedienungsanleitung

BETHLEHEM LIGHTING

BETHLEHEM LIGHTING 6.5’ Tinsel Tree Bedienungsanleitung

Home Accents Holiday

Home Accents Holiday TG76P3D93L08 Bedienungsanleitung

Costway

Costway CM23595US Bedienungsanleitung

Home Accents Holiday

Home Accents Holiday TG76P4C15D03 Bedienungsanleitung

Holiday Living

Holiday Living TV40EH339C01 Bedienungsanleitung

CASARIA

CASARIA DBGB001 Bedienungsanleitung

Alpine

Alpine CRD100L-WT Bedienungsanleitung

Home Accents Holiday

Home Accents Holiday TG76M3W89C00 Bedienungsanleitung

CASARIA

CASARIA 104006 Bedienungsanleitung

Alpine

Alpine CRD111S-GN Bedienungsanleitung

Home Accents Holiday

Home Accents Holiday 1001540584 Bedienungsanleitung

Home Accents Holiday

Home Accents Holiday TG90P3F28D00 Bedienungsanleitung

Williams-Sonoma

Williams-Sonoma TG46P4368L01 Bedienungsanleitung

Trim a Home

Trim a Home 7.5 ft. Berkshire Fir Tree Bedienungsanleitung

Home Accents Holiday

Home Accents Holiday 1004363936 Bedienungsanleitung

Polytree

Polytree TG66EH148C17 Bedienungsanleitung