Pony JORGENSEN 60400 Bedienungsanleitung

Made in China | Fabriqué en Chine | Hecho en China

ponyjorgensen.com

271 Mayhill Street Saddle Brook, NJ 07663 USA

OWNER'S GUIDE

GUIDE DE L’UTILISATEUR

INSTRUCCIONES DE USO

CLAMPING SAWHORSES

TRÉTEAUX À MÂCHOIRES

CABALLETES DE SUJECIÓN

#60400

SCAN TO VIEW VIDEO

SAISIR L’IMAGE POUR

VISIONNER LA VIDÉO

ESCANEAR PARA VER VÍDEO

Rev 08/2022

PUSH PUSH

PUSH

PUSH PUSH

PUSH

Please read the instructions in this booklet thoroughly before use. Understanding how this

sawhorse works and setting it correctly is fundamental to obtaining a satisfactory result.

Read all safety warnings and all instructions. Failure to follow the warnings and instructions

may cause injury and misuse. Save all warnings and instructions for future reference.

WARNING: Pinch points

When unpacking, make sure that the product is intact and undamaged. If any parts are missing or

broken, please call 1-800.776.2228 or contact [email protected] as soon as possible.

IMPORTANT

WARNING

INCLUDED

Sawhorse (2 pieces)

E-Z HOLD Clamp (2 pieces) Model # 33612

Bench Dogs (2 pieces) Model # 60401

Angle Clamp Adapter Model # 60402

PUSH PUSH

1. Do not load with more than 600 lbs. (272 kgs) on one piece sawhorse and 1200 lbs. (545 kgs) on

two sawhorses. Do not leave heavy loads on work surface for extended periods of time.

2. Ensure Sawhorse is set up on firm, level ground. Check for stability before each use.

3. Do not apply an unbalanced load which could cause the Sawhorse to tip over.

4. Do not use the Sawhorse as a stepladder or standing platform. Do not use the lower tool tray as a

stepping stool.

5. Be sure that the legs are fully opened.

6. Avoid applying excessive force when clamping with the supplied clamps.

7. Safety attire guidelines:

- Do not wear loose clothing or jewelry, which can be caught in moving parts.

- Non-skid footwear is recommended when working outdoors.

- Secure long hair or wear protective hair covering to avoid it getting caught and potential injury.

8. Recommended personal protective equipment:

- Use safety glasses.

- Use face or dust mask when working operations that create or involve dust.

9. Do not cut or drill into the Sawhorse as it may weaken supports and/or damage the product.

10. Caution required when using high temperature tools (heat guns, torch, solder iron, etc.) may

damage Sawhorse and/or reduce clamping capability.

11. Do not store flammable liquids on the Sawhorse.

12. When not in use, tools should be stored in a secure, dry place, out of the reach of children and

unauthorized usage.

Check ponyjorgensen.com for product or distributor information.

IMPORTANT SAFETY INSTRUCTIONS

SPECIFICATIONS

Scan to view introduction video

Weight Capacity for Single Sawhorse

Weight Capacity for a Pair of Sawhorse

Max Weight Capacity for Tool Tray

Max Clamping Span

Working Size

Folded Size

Weight

600 lbs

1200 lbs

20 lbs

26"

32" x 30.75" x 48"

34" x 30.75" x 5"

26 lbs

The portable clamping Sawhorses are packaged completely folded.

To open:

1. Place the Sawhorse upright on the floor.

2. Open the legs fully until the tool tray is flat. The Sawhorse legs

and tool tray should create an “A” shape. (Figure 1)

OPERATION: OPENING THE SAWHORSE

Figure 2

Figure 1

Take down the trigger clamp

from the sawhorse. Remember

to take the clamp from the right

side first and then the whole

clamp can be pulled out easily.

(Figure 2)

ADJUSTABLE CLAMPS

PUSH PUSH

Press the button closest to the side you are using and align the trigger clamps with the slot and

insert it fully as shown. Once the clamps are inserted, release the button. (Figure 4)

Push the bench dogs into the desired holes on the sawhorse. (Figure 5)

Adjust the trigger clamp according to your needs. (Figure 3)

Figure 3

Figure 4

Figure 5

Remove the stationary jaw from the

clamp by pushing the press button.

Sliding the moveable jaw along the

bar of the clamp to the other end.

Insert the trigger clamp to the slot on

the sides of the sawhorse.

PUSH

PUSH PUSH

PUSH

Bench dogs and quick clamps can be used for multiple clamping options.(Figure 6)

12" E-Z HOLD Trigger Clamps can be used independently if desired.

Figure 6

PUSH

1 2

SPREADING

EXPANDING

ONE-HAND

CLAMPING

QUICK RELEASE LEVER

PUSH PUSH

Using standard off the shelf lumber, a premade project panel for the tabletop, you can

build yourself a solid wood sawhorse desk.(Figure 7)

Figure 7

Use the built-in tool tray for hardware and other parts storage. (Figure 8)

Figure 8

PUSH PUSH

PUSH

The Sawhorse comes with an angle clamp adapter which is perfect for joining corners when using

with the Pony angle clamp. (Figure 9)

ANGLE CLAMP ADAPTER APPLICATION

Figure 9

1. Lift the tool tray in the center to allow the legs to fold. (Figure 10)

2. The fold flat Sawhorse for easy transport and storage. (Figure 11)

WARNING: Keep fingers away from moving joints to avoid pinching.

*Angle Clamp sold Separately -

Model #9180

Check ponyjorgensen.com for product

or distributor information.

OPERATION: CLOSING THE SAWHORSE

Figure 10 Figure 11

PUSH PUSH

PUSH

ponyjorgensen.com

271 Mayhill Street Saddle Brook, NJ 07663 USA

MAINTENANCE

Use mild soap and a damp cloth to clean the tool. Never let any liquid get inside the product;

never immerse any part of the product into a liquid.

WARRANTY

3 YEAR LIMITED WARRANTY: This product is warranted to the original purchaser to be free

from defects in material and workmanship for three years from the date of purchase.

Pony | Jorgensen will repair or replace, FREE OF CHARGE, during the warranty period, any

product that proves to be defective in material or workmanship under normal use. If repair is

not practical, Pony | Jorgensen may elect to replace the product or refund the purchase price in

exchange for return of the defective product. Please contact Pony | Jorgensen by calling

1-800-776-2228 or contact [email protected].

PATENTS PENDING

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Inhaltsverzeichnis

Andere Pony Werkzeugaufbewahrung Handbücher

Pony

Pony JORGENSEN 60300 Bedienungsanleitung

Beliebte Werkzeugaufbewahrung Handbücher anderer Marken

Ryobi

Ryobi RWB03 Bedienungsanleitung

Husky

Husky H27CH5TR4BGK Bedienungsanleitung

Scheppach

Scheppach ts 2100 Bedienungsanleitung

Cornwell Tools

Cornwell Tools CTB360AKBK Bedienungsanleitung

DIVERSIFIED WOODCRAFTS

DIVERSIFIED WOODCRAFTS SHAIN GSB-6024 Bedienungsanleitung

Cassese

Cassese CS200 CART Bedienungsanleitung

Kendall Howard

Kendall Howard ESDW-9630-1000 Bedienungsanleitung

Lista

Lista Align Montageanleitung

Workzone

Workzone 99609 Bedienungsanleitung

Stanley

Stanley STST83800-1 Bedienungsanleitung

Homak

Homak PROFESSIONAL Series Systemhandbuch

Perel

Perel ROLLER SHUTTER STORAGE CABINET Bedienungsanleitung

Husky

Husky H5CH2R Bedienungsanleitung

BGS technic

BGS technic 4107 Bedienungsanleitung

Clarke

Clarke CWB1250 Bedienungsanleitung

Ryobi

Ryobi RWB02 Bedienungsanleitung

Husky

Husky H52CH6HDV3WHT Bedienungsanleitung

Sealey

Sealey PTB66004 Bedienungsanleitung