Porter-Cable C6001 Bedienungsanleitung

Française : Page 21

Español: Página 43

C6001

AIR COMPRESSOR

Maintenance-free pump

Compresor de aire

La pompe sans entretien

Compresseur d’air

La bomba sin mantenimiento

TO REDUCE THE RISK OF INJURY,

USER MUST READ INSTRUCTION

MANUAL BEFORE OPERATING PRODUCT.

PARA REDUCIR EL RIESGO

DE LESIONES, EL USUARIO

DEBE LEER EL MANUAL DE INSTRUCCIONES ANTES

DE OPERAR EL PRODUCTO

AFIN DE RÉDUIRE LE

RISQUE DE

BLESSURES, L’UTILISATEUR DOIT LIRE LE MODE

D’EMPLOI AVANT D’UTILISER LE PRODUIT.

Instruction manual

Manuel d'instructions

Manual de'instrucciones

www.deltaportercable.com

2 - ENG1000002853

SAFETY GUIDELINES - DEFINITIONS

This manual contains information that is important for you to know and under-

stand. This information relates to protecting YOUR SAFETY and PREVENTING

EQUIPMENT PROBLEMS. To help you recognize this information, we use the

symbols below. Please read the manual and pay attention to these symbols.

Indicates an

imminently hazardous

situation which, if not avoided, will

result in death or serious injury.

Indicates a potentially

hazardous situation

which, if not avoided, may result in

minor or moderate injury.

Indicates a potentially

hazardous situation

which, if not avoided, could result in

death or serious injury.

Used without the

safety alert symbol

indicates a potentially hazardous

situation which, if not avoided, may

result in property damage.

IMPORTANT SAFETY INSTRUCTIONS

Some dust created by power sanding, sawing, grinding,

drilling, and other construction activities contains chemicals

known to the State of California to cause cancer, birth defects or other

reproductive harm. Some example of these chemicals are:

• lead from lead-based paints

• crystalline silica from bricks and cement and other masonry products

• arsenic and chromium from chemically-treated lumber

Your risk from these exposures varies, depending on how often you do this

type of work. To reduce your exposure to these chemicals: work in a well

ventilated area, and work with approved safety equipment, always wear

OSHA/MSHA/NIOSH approved, properly fitting face mask or respirator when

using such tools.

When using air tools, basic safety precautions should always be followed to

reduce the risk of personal injury.

This product contains chemicals known to the State of

California to cause cancer, and birth defects or other

reproductive harm. Wash hands after handling.

Do not operate this unit until you read and

understand this instruction manual for safety,

operation and maintenance instructions.

SAVE THESE INSTRUCTIONS

HAZARD

RISK OF EXPLOSION OR FIRE

WHAT CAN HAPPEN HOW TO PREVENT IT

• It is normal for electrical

contacts within the motor and

pressure switch to spark.

• Always operate the compressor

in a well ventilated area free

of combustible materials,

gasoline, or solvent vapors.

3 - ENG 1000002853

• If electrical sparks from

compressor come into contact

with flammable vapors, they may

ignite, causing fire or explosion.

• If spraying flammable materials,

locate compressor at least 20

feet (6.1 m) away from spray

area. An additional length of

air hose may be required.

• Store flammable materials

in a secure location away

from compressor.

• Restricting any of the compressor

ventilation openings will

cause serious overheating

and could cause fire.

• Never place objects against

or on top of compressor.

• Operate compressor in an open

area at least 12" (30.5 cm) away

from any wall or obstruction that

would restrict the flow of fresh

air to the ventilation openings.

• Operate compressor in a

clean, dry well ventilated area.

Do not operate unit in any

confined area. Store indoors.

• Unattended operation of this

product could result in personal

injury or property damage.

To reduce the risk of fire, do

not allow the compressor

to operate unattended.

• Always remain in attendance with

the product when it is operating.

• Always turn off and unplug

unit when not in use.

HAZARD

RISK TO BREATHING (ASPHYXIATION)

WHAT CAN HAPPEN HOW TO PREVENT IT

• The compressed air directly from

your compressor is not safe

for breathing. The air stream

may contain carbon monoxide,

toxic vapors, or solid particles

from the air tank. Breathing

these contaminant's can cause

serious injury or death.

• Air obtained directly from the

compressor should never be

used to supply air for human

consumption. In order to use air

produced by this compressor

for breathing, suitable filters

and in-line safety equipment

must be properly installed. In-

line filters and safety equipment

used in conjunction with the

compressor must be capable

of treating air to all applicable

local and federal codes prior

to human consumption.

4 - ENG1000002853

• Sprayed materials such as

paint, paint solvents, paint

remover, insecticides, weed

killers, may contain harmful

vapors and poisons.

• Work in an area with good cross

ventilation. Read and follow the

safety instructions provided on the

label or safety data sheets for the

materials you are spraying. Always

use certified safety equipment:

OSHA/MSHA/NIOSH respiratory

protection designed for use

with your specific application.

HAZARD

RISK OF BURSTING

Air Tank: The air tank on your Air Compressor is designed and may be UM

coded (for units with air tanks greater than 6" (152 mm)) according to ASME

Section VIII, Div. 1 rules. All pressure vessels should be inspected once

every two years. To find your state pressure vessels inspector, look under the

Division of Labor and Industries in the government section of a phone book .

The following conditions could lead to a weakening of the

air tank, and result in a violent air tank explosion:

WHAT CAN HAPPEN HOW TO PREVENT IT

• Failure to properly drain

condensed water from air

tank, causing rust and thinning

of the steel air tank.

• Drain air tank daily or after

each use. If air tank develops

a leak, replace it immediately

with a new air tank or replace

the entire compressor.

• Modifications or attempted

repairs to the air tank. • Never drill into, weld, or make any

modifications to the air tank or its

attachments. Never attempt to

repair a damaged or leaking air

tank. Replace with a new air tank.

• Unauthorized modifications

to the safety valve or any

other components which

control air tank pressure.

• The air tank is designed

to withstand specific

operating pressures. Never

make adjustments or parts

substitutions to alter the factory

set operating pressures.

Attachments & accessories:

• Exceeding the pressure rating

of air tools, spray guns, air

operated accessories, tires,

and other inflatables can cause

them to explode or fly apart, and

could result in serious injury.

• Follow the equipment

manufacturers recommendation

and never exceed the maximum

allowable pressure rating

of attachments. Never use

compressor to inflate small low

pressure objects such as children’s

toys, footballs, basketballs, etc.

5 - ENG 1000002853

Tires

• Over inflation of tires could result in

serious injury and property damage. • Use a tire pressure gauge to check

the tires pressure before each use

and while inflating tires; see the tire

sidewall for the correct tire pressure.

NOTE: Air tanks, compressors and similar

equipment used to inflate tires can fill

small tires similar to these very rapidly.

Adjust pressure regulator on air supply

to no more than the rating of the tire

pressure. Add air in small increments and

frequently use the tire gauge to prevent

over inflation.

HAZARD

RISK OF ELECTRICAL SHOCK

WHAT CAN HAPPEN HOW TO PREVENT IT

• Your air compressor is powered

by electricity. Like any other

electrically powered device,

If it is not used properly it

may cause electric shock.

• Never operate the compressor

outdoors when it is raining

or in wet conditions.

• Never operate compressor

with protective covers

removed or damaged.

• Never operate compressor with

damaged or worn cords.

• Repairs attempted by unqualified

personnel can result in serious

injury or death by electrocution.

• Any electrical wiring or repairs

required on this product should be

performed by authorized service

center personnel in accordance with

national and local electrical codes.

• Electrical Grounding: Failure

to provide adequate grounding

to this product could result in

serious injury or death from

electrocution. Refer to "Grounding

Instructions" paragraph in

the "Installation" section.

• Make certain that the electrical

circuit to which the compressor

is connected provides proper

electrical grounding, correct voltage

and adequate fuse protection.

6 - ENG1000002853

HAZARD

RISK FROM FLYING OBJECTS

WHAT CAN HAPPEN HOW TO PREVENT IT

• The compressed air stream can

cause soft tissue damage to

exposed skin and can propel dirt,

chips, loose particles, and small

objects at high speed, resulting in

property damage or personal injury.

• Always wear certified safety

equipment: ANSI Z87.1

eye protection (CAN/CSA

Z94.3) with side shields when

using the compressor.

• Never point any nozzle or sprayer

toward any part of the body or

at other people or animals.

• Always turn the compressor

off and bleed pressure from

the air hose and air tank before

attempting maintenance,

attaching tools or accessories.

HAZARD

RISK OF HOT SURFACES

WHAT CAN HAPPEN HOW TO PREVENT IT

• Touching exposed metal such

as the compressor head, engine

head, engine exhaust or outlet

tubes, can result in serious burns.

• Never touch any exposed metal

parts on compressor during or

immediately after operation.

Compressor will remain hot for

several minutes after operation.

• Do not reach around protective

shrouds or attempt maintenance

until unit has been allowed to cool.

HAZARD

RISK FROM MOVING PARTS

WHAT CAN HAPPEN HOW TO PREVENT IT

• Moving parts such as the pulley,

flywheel, and belt can cause

serious injury if they come into

contact with you or your clothing.

• Never operate the compressor

with guards or covers which

are damaged or removed.

• Keep your hair, clothing, and

gloves away from moving parts.

Loose clothes, jewelry, or long hair

can be caught in moving parts.

• Air vents may cover moving parts

and should be avoided as well.

• Attempting to operate compressor

with damaged or missing parts or

attempting to repair compressor

with protective shrouds removed

can expose you to moving parts

and can result in serious injury.

• Any repairs required on this product

should be performed by authorized

service center personnel.

7 - ENG 1000002853

HAZARD

RISK OF UNSAFE OPERATION

WHAT CAN HAPPEN HOW TO PREVENT IT

• Unsafe operation of your air

compressor could lead to serious

injury or death to you or others.

• Review and understand all

instructions and warnings

in this manual.

• Become familiar with the operation

and controls of the air compressor.

• Keep operating area clear of all

persons, pets, and obstacles.

• Keep children away from the

air compressor at all times.

• Do not operate the product

when fatigued or under the

influence of alcohol or drugs.

Stay alert at all times.

• Never defeat the safety fea-

tures of this product.

• Equip area of operation

with a fire extinguisher.

• Do not operate machine

with missing, broken, or

unauthorized parts.

HAZARD

RISK OF FALLING

WHAT CAN HAPPEN HOW TO PREVENT IT

• A portable compressor can

fall from a table, workbench,

or roof causing damage to

the compressor and could

result in serious injury or

death to the operator.

• Always operate compressor in a

stable secure position to prevent

accidental movement of the

unit. Never operate compressor

on a roof or other elevated

position. Use additional air

hose to reach high locations.

HAZARD

RISK OF INJURY FROM LIFTING

What can happen How to prevent it

• Serious injury can result from

attempting to lift too heavy an

object.

• The compressor is too heavy to

be lifted by one person. Obtain

assistance from others before

lifting.

8 - ENG1000002853

HAZARD

RISK FROM NOISE

WHAT CAN HAPPEN HOW TO PREVENT IT

• Under some conditions

and duration of use, noise

from this product may

contribute to hearing loss.

• Always wear certified safety

equipment: ANSI S12.6

(S3.19) hearing protection.

SAVE THESE INSTRUCTIONS

FOR FUTURE USE

pump should not run more than 30-45 minutes in any given hour.

SPECIFICATIONS

Model No. C6001

Running Horsepower *1.1

Bore 1.875"

Stroke 1.25"

Voltage/Hz-Single Phase 120/60

Minimum Branch Circuit Requirement 15 amps

Fuse Type Time Delay

Air Tank Capacity (Gallon) 17

Approximate Cut-in Pressure 120 PSIG

Approximate Cut-out Pressure 150 PSIG

SCFM @ 40 PSIG *4.3

SCFM @ 90 PSIG *3.3

*Tested per ISO 1217

Refer to Glossary for abbreviations.

GLOSSARY

Become familiar with these terms before operating the unit.

CFM: Cubic feet per minute.

SCFM: Standard cubic feet per minute; a unit of measure of air delivery.

PSIG: Pounds per square inch gauge; a unit of measure of pressure.

Code Certification: Products that bear one or more of the following marks: UL,

CUL, ETL, CETL, have been evaluated by OSHA certified independent safety labo-

ratories and meet the applicable Standards for Safety.

Cut-In Pressure: While the motor is off, air tank pressure drops as you continue

to use your accessory. When the tank pressure drops to a certain lower level the

motor will restart automatically. The low pressure at which the motor automatically

restarts is called "cut-in" pressure.

Cut-Out Pressure: When an air compressor is turned on and begins to run, air

pressure in the air tank begins to build. It builds to a certain high pressure before

the motor automatically shuts off, protecting your air tank from pressure higher

than its capacity. The high pressure at which the motor shuts off is called "cut-

out" pressure.

Branch Circuit: Circuit carrying electricity from electrical panel to outlet.

9 - ENG 1000002853

DUTY CYCLE

This air compressor pump is capable of running continuously. However, to

prolong the life of your air compressor, it is recommended that a 50%-75%

average duty cycle be maintained; that is, the air compressor pump should not

run more than 30-45 minutes in any given hour.

ACCESSORIES

Accessories for this unit are available at the store the unit was purchased.

ASSEMBLY

Unpacking

1. Remove unit from carton and discard all packaging.

INSTALLATION

HOW TO SET UP YOUR UNIT

Location of the Air Compressor

• Locate the air compressor in a clean, dry and well ventilated area.

• The air compressor should be located at least 12" (30.5 cm) away from the

wall or other obstructions that will interfere with the flow of air.

• The air compressor pump and shroud are designed to allow for proper

cooling. The ventilation openings on the compressor are necessary to

maintain proper operating temperature. Do not place rags or other containers

on or near these openings.

GROUNDING INSTRUCTIONS

Risk of Electrical Shock. In the event of a short circuit,

grounding reduces the risk of shock by providing an escape

wire for the electric current. This air compressor must be properly grounded.

The portable air compressor is equipped with a cord having a grounding wire with

an appropriate grounding plug (see following illustrations).

1. The cord set and plug with this unit contains a grounding pin. This plug

MUST be used with a grounded outlet.

IMPORTANT: The outlet being used must

Grounded

Outlets

Plug

Grounding Pin

be installed and grounded in accordance

with all local codes and ordinances.

2. Make sure the outlet being used

has the same configuration as the

grounded plug. DO NOT USE AN

ADAPTER. See illustration.

3. Inspect the plug and cord before each

use. Do not use if there are signs of damage.

4. If these grounding instructions are not completely understood, or if in doubt as

to whether the compressor is properly grounded, have the installation checked

by a qualified electrician.

Risk of Electrical Shock. IMPROPER GROUNDING CAN

RESULT IN ELECTRICAL SHOCK.

Do not modify the plug provided. If it does not fit the available outlet, a correct

outlet should be installed by a qualified electrician.

Repairs to the cord set or plug MUST be made by a qualified electrician.

10 - ENG1000002853

Extension Cords

If an extension cord must be used, be sure it is:

• a 3-wire extension cord that has a 3-blade grounding plug, and a 3-slot

receptacle that will accept the plug on the product

• in good condition

• no longer than 50 feet

• 12 gauge (AWG) or larger. (Wire size increases as gauge number

decreases. 10 AWG and 8 AWG may also be used. DO NOT USE 14

OR 16 AWG.)

The use of an undersized extension cord will cause voltage

to drop resulting in power loss to the motor and overheating.

Instead of using an extension cord, increase the working reach of the air

hose by attaching another length of hose to its end. Attach additional

lengths of hose as needed.

VOLTAGE AND CIRCUIT PROTECTION

Refer to the specification chart for the voltage and minimum branch circuit

requirements.

Risk of Opertion. Certain air compressors can be operated

on a 15 amp circuit if the following conditions are met.

1. Voltage supply to circuit must comply with the National Electrical Code.

2. Circuit is not used to supply any other electrical needs.

3. Extension cords comply with specifications.

4. Circuit is equipped with a 15 amp circuit breaker or 15 amp time delay fuse.

NOTE: If compressor is connected to a circuit protected by fuses, use only

time delay fuses. Time delay fuses should be marked "D" in Canada and "T"

in the US.

If any of the above conditions cannot be met, or if operation of the compressor

repeatedly causes interruption of the power, it may be necessary to operate it from

a 20 amp circuit. It is not necessary to change the cord set.

Transporting

When transporting the compressor in a vehicle, trailer, etc., make sure the tank

is drained and the unit is secured with straps to prevent tipping. Use care when

driving to prevent tipping the unit over in the vehicle. Damage can occur to the

compressor or surrounding items if the compressor is tipped.

Lifting

Always use two people when lifting and lift from the recommended N

lift points (N). DO NOT lift by wheels or shroud.

Moving

The wheels and handle do not provide

adequate clearance, stability, or support for pulling the

unit up and down stairs or steps. The unit must be lifted or

pushed up a ramp.

1. Grasp handle of compressor and tilt compressor

back to rest on wheels.

Risk of Unsafe Operation. Ensure proper

footing and use caution when rolling compressor so that

unit does not tip or cause loss of balance.

2. When location is reached slowly lower compressor to ground. Always

store compressor in a horizontal position resting on the rubber bumpers

and wheels.

Andere Handbücher für C6001

Inhaltsverzeichnis

Sprachen:

Andere Porter-Cable Luftkompressor Handbücher

Porter-Cable

Porter-Cable 1000002853 Bedienungsanleitung

Porter-Cable

Porter-Cable C5101 Bedienungsanleitung

Porter-Cable

Porter-Cable CPLDC2541S Bedienungsanleitung

Porter-Cable

Porter-Cable CPFAC2040P Bedienungsanleitung

Porter-Cable

Porter-Cable PXCMLC3706056 Bedienungsanleitung

Porter-Cable

Porter-Cable CPLDC2540P Bedienungsanleitung

Porter-Cable

Porter-Cable A18760-1006-1 Bedienungsanleitung

Porter-Cable

Porter-Cable CPFC2TV3520W Bedienungsanleitung

Porter-Cable

Porter-Cable C5100 Bedienungsanleitung

Porter-Cable

Porter-Cable CMB15-B3 Bedienungsanleitung

Porter-Cable

Porter-Cable J0B BOSS C3151 Bedienungsanleitung

Porter-Cable

Porter-Cable N003568 Bedienungsanleitung

Porter-Cable

Porter-Cable PCFP02003 Bedienungsanleitung

Porter-Cable

Porter-Cable D26126-024-0 Bedienungsanleitung

Porter-Cable

Porter-Cable CF6131 Bedienungsanleitung

Porter-Cable

Porter-Cable CPLDC2541S Bedienungsanleitung

Porter-Cable

Porter-Cable C2004 Bedienungsanleitung

Porter-Cable

Porter-Cable CF2020 Bedienungsanleitung

Porter-Cable

Porter-Cable CPFAC2600P Bedienungsanleitung

Porter-Cable

Porter-Cable CFFN250T Bedienungsanleitung

Porter-Cable

Porter-Cable C7550 Bedienungsanleitung

Porter-Cable

Porter-Cable C5101 Bedienungsanleitung

Porter-Cable

Porter-Cable C7550 Bedienungsanleitung

Porter-Cable

Porter-Cable CPF23400P Bedienungsanleitung

Beliebte Luftkompressor Handbücher anderer Marken

Sparmax

Sparmax DC-25XR Bedienungsanleitung

KAESER

KAESER M122 Bedienungsanleitung

GMC

GMC GAC1500 Bedienungsanleitung

Briggs & Stratton

Briggs & Stratton Air Compressor Bedienungsanleitung

Fini

Fini F3GST2TK Bedienungsanleitung

Industrial Air

Industrial Air CP1580325 Programmierhandbuch

Campbell Hausfeld

Campbell Hausfeld RP3300 Kurzanleitung

Ingersoll-Rand

Ingersoll-Rand UP6 20 HP Bedienungsanleitung

Hitachi

Hitachi EC99S Bedienerhandbuch

Parkside

Parkside PKO 270 A1 Bedienungsanleitung

Sullair

Sullair 185 Bedienungsanleitung

Clas Ohlson

Clas Ohlson QIE-ZTH-15 Bedienungsanleitung

Ferm

Ferm CRM1046 Bedienungsanleitung

BE AC153 Bedienungsanleitung

RIDGID

RIDGID OF25150A Bedienungsanleitung

Johnson Controls

Johnson Controls QUANTUM LX Handbuch

Sears

Sears Craftsman 919.167463 Bedienungsanleitung

Ring Automotive

Ring Automotive RAC700 Bedienungsanleitung