POS-Mate PM-BCU1D-B Bedienungsanleitung
USB Barcode Scanner
PM-BCU1D-B
Instruction Manual
PM-BCBT2D-W Instruction Manual v.1.0
3
Contents
Warranty 4
Get To Know Your POS-mate Barcode Scanner 5
LED Indicators 6
Beep Indicators 6
Setting Up Your POS-mate Barcode Scanner 7
Volume Settings 7
Automatic Scanning Mode 8
Continuous Scanning Mode 8
Suffix Settings 9
Inversed Barcode Setting 10
Hide Character Settings 10
Keyboard Language Settings 12
Lock Configuration 13
Restore Factory Settings 13
System Information 13
Technical Information 14
Troubleshooting 15
PM-BCBT2D-W Instruction Manual v.1.0
4
Warranty
POS-mate reserves the right to make changes to any product to improve
reliability, function, or design. POS-mate does not assume any product
liability arising out of, or in connection with, the application or use of any
product, circuit, or application described herein. No license is granted,
either expressly or by implication, estoppel, or otherwise under any
patent right or patent, covering or relating to any combination, system,
apparatus, machine, material, method, or process in which POS-mate
products might be used. An implied license exists only for equipment,
circuits, and subsystems contained in POS-mate products.
For the complete hardware product warranty statement, go to:
http://www.pos-mate.com/warranty
For Australia Only
This warranty is given by PICA Australia Pty. Ltd (ABN 70 113 812 721) of 8
Translink Drive, Keilor Park, Vic. 3042 Australia, as the owner of the brand
referred to as POS-mate. POS-mate products are subject to rigorous
testing and assessment as to their quality and suitability for purpose. Our
goods come with guarantees that cannot be excluded under Australian
Consumer Law. You are entitled to a replacement or refund for a major
failure and compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or replaced if
the goods fail to be of acceptable quality and the failure does not amount
to a major failure. POS-mate’s Australian limited warranty above is in
addition to any rights and remedies you may have under Australian
Consumer Law. If you have any queries, please call POS-mate on
+61393367336.
PM-BCBT2D-W Instruction Manual v.1.0
5
Get To Know Your POS-mate Barcode Scanner
PM-BCBT2D-W Instruction Manual v.1.0
6
LED Indicators
LED Sequence
Description
Blue - Flash
Reading Barcode
Beep Indicators
Beep Sequence
Description
2 short beeps
Connected
1 short beep
Barcode read successfully
1 long beep
Data upload unsuccessful
PM-BCBT2D-W Instruction Manual v.1.0
7
Setting Up Your POS-mate Barcode Scanner
Remove your POS-mate USB Barcode Scanner from its
packaging and place it on your countertop.
Insert one end of the cable supplied into the POS-mate USB
Barcode Scanner, the other end into a USB port on you PC
or Mac.
Your POS-mate USB Barcode Scanner is ready to use.
Volume Settings
Your POS-mate USB Barcode Scanner will beep each time the
scanner button is pressed. Adjust the volume of the scanning
beep on your POS-mate USB Barcode Scanner to mute, low
volume or high volume by scanning the desired barcode below.
Mute
Unmute
Low Volume
High Volume (default)
PM-BCBT2D-W Instruction Manual v.1.0
8
Automatic Scanning Mode
Your POS-mate USB Barcode Scanner can be programmed to
automatically scan when movement is detected without the need
for the scanner button to be pressed. Scan the Turn On Auto
Mode barcode to enable this feature, you can disable this feature
at any time by scanning the Turn Off Auto Mode barcode.
Manual Scan Mode (default)
Turn Off Auto Mode (default)
Turn On Auto Mode
Continuous Scanning Mode
Your POS-mate USB Barcode Scanner can be programmed to
continuously scan without the need for the scanner button to be
pressed. Scan the Continuous Scan Mode barcode to enable this
feature, you can disable this feature at any time by scanning the
Manual Scan Mode barcode.
Continuous Scan Mode
PM-BCBT2D-W Instruction Manual v.1.0
9
Suffix Settings
Your POS-mate USB Barcode Scanner will simulate pushing the
Return or Enter key on your keyboard at the end of each scan,
also known as Carriage Return (CR). Your scanner can be
programmed to simulate a Tab on your keyboard or simulate
nothing after each scan. Scan the required barcode for the
desired setting.
Add Return / Enter (CR) (default)
Add Tab
Remove Suffix
PM-BCBT2D-W Instruction Manual v.1.0
10
Inversed Barcode Setting
Your POS-mate USB Barcode Scanner can read barcodes that
have a black background and white bars from factory, these
barcodes are known as inversed barcodes. If you would like to
remove this feature please scan the Disable Inversed Barcodes,
scan the Enable Inversed Barcodes to enable it.
Disable Inversed Barcodes
Enable Inversed Barcodes
Hide Character Settings
Your POS-mate USB Barcode Scanner can hide 1, 2, or 3
characters at the start or the end of a barcode. Simply scan the
barcode required below to set you POS-mate USB Scanner.
Hide First Barcode Character
Hide First 2 Barcode Characters
Inhaltsverzeichnis
Andere POS-Mate Barcode-Lesegerät Handbücher
Beliebte Barcode-Lesegerät Handbücher anderer Marken
POSMicro
POSMicro Datalogic PowerScan D7100 Bedienungsanleitung
Marson
Marson MT780 Kurzanleitung zur Einrichtung
NCR
NCR RealPOS Bedienungsanleitung
Motorola
Motorola SE3300 Kurzanleitung zur Einrichtung
Element
Element P130BT Bedienungsanleitung
Motorola
Motorola Symbol LS3008 Installations- und Betriebshandbuch
