POS-X EVO-TM2 Bedienungsanleitung
Revision v1.2 November 2009
EVO-TM2
Hardware
System
User Manual
ii
Copyright 2009 February
All Rights Reserved
Manual Version 1.1
Part Number:
The information contained in this document is subject to change without notice.
We make no warranty of any kind with regard to this material, including, but not
limited to, the implied warranties of merchantability and fitness for a particular
purpose. We shall not be liable for errors contained herein or for incidental or
consequential damages in connection with the furnishing, performance, or use of
this material.
This document contains proprietary information that is protected by copyright. All
rights are reserved. No part of this document may be photocopied, reproduced or
translated to another language without the prior written consent of the
manufacturer.
TRADEMARK
Intel®, Pentium® and MMX are registered trademarks of Intel® Corporation.
Microsoft® and Windows® are registered trademarks of Microsoft Corporation.
Other trademarks mentioned herein are the property of their respective owners.
iii
Safety
IMPORTANT SAFETY INSTRUCTIONS
1. To disconnect the machine from the electrical Power Supply, turn off the power
switch and remove the power cord plug from the wall socket. The wall socket
must be easily accessible and in close proximity to the machine.
2. Read these instructions carefully. Save these instructions for future reference.
3. Follow all warnings and instructions marked on the product.
4. Do not use this product near water.
5. Do not place this product on an unstable cart, stand, or table. The product may fall,
causing serious damage to the product.
6. Slots and openings in the cabinet and the back or bottom are provided for
ventilation; to ensure reliable operation of the product and to protect it from
overheating. These openings must not be blocked or covered. The openings
should never be blocked by placing the product on a bed, sofa, rug, or other
similar surface. This product should never be placed near or over a radiator or
heat register, or in a built-in installation unless proper ventilation is provided.
7. This product should be operated from the type of power indicated on the marking
label. If you are not sure of the type of power available, consult your dealer or
local power company.
8. Do not allow anything to rest on the power cord. Do not locate this product where
persons will walk on the cord.
9. Never push objects of any kind into this product through cabinet slots as they may
touch dangerous voltage points or short out parts that could result in a fire or
electric shock. Never spill liquid of any kind on the product.
CE MARK
This device complies with the requirements of the EEC directive
2004/108/EC with regard to “Electromagnetic compatibility” and 2006/95/EC
“Low Voltage Directive”
FCC
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that
may cause undesired operation
iv
CAUTION ON LITHIUM BATTERIES
There is a danger of explosion if the battery is replaced incorrectly. Replace only with
the same or equivalent type recommended by the manufacturer. Discard used
batteries according to the manufacturer’s instructions.
LEGISLATION AND WEEE SYMBOL
2002/96/EC Waste Electrical and Electronic Equipment Directive on the treatment,
collection, recycling and disposal of electric and electronic devices and their
components.
The crossed dustbin symbol on the device means that it should not be disposed of
with other household wastes at the end of its working life. Instead, the device
should be taken to the waste collection centers for activation of the treatment,
collection, recycling and disposal procedure.
To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this
product, or their local government office, for details of where and how they can
take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of
the purchase contract.
This product should not be mixed with other commercial wastes for disposal.
v
Table Contents
1 Package Checklist.......................................1
1-1 Standard Items....................................................................... 1
1-2 Optional Items........................................................................ 2
2 System View ................................................3
2-1 Front View.............................................................................. 3
2-2 Rear View .............................................................................. 4
2-3 Bottom View........................................................................... 5
2-4 I/O View ................................................................................. 6
3 Peripheral Installation.................................7
3-1 MSR....................................................................................... 7
3-2 VFD........................................................................................ 8
3-3 Wall Mount Kit...................................................................... 10
4 System Assembly & Disassembly...........12
4-1 Remove the System Stand.................................................. 12
4-2 Remove the LCD Rear Cover & the EMI Cover............ Error!
Bookmark not defined.
4-3 Replace the Power Adapter................................................. 13
4-4 Replace the AD Board ...........Error! Bookmark not defined.
4-5 Replace the Inverter Board....Error! Bookmark not defined.
4-6 Replace the LCD Front BezelError! Bookmark not defined.
5 Specification..............................................14
6 Jumper Settings........................................15
6-1 Connectors and Functions................................................... 15
6-2 Motherboard Layout ............................................................ 16
6-3 Jumper Setting..................................................................... 17
1
1 Package Checklist
Take the system unit out of the carton. Remove the unit from the carton by holding
it by the foam inserts. The following contents should be found in the carton:
1-1 Standard Items
a.
d.
b.
e.
c.
f.
a. Monitor
b. Driver CD
c. Power Adapter (36W)
d. Power Cable
e. USB Cable for touch
f. VGA Cable
2
1-2 Optional Items
a.
c.
b.
a. MSR Module
b. VFD Module
c. Wall Mount Kit
3
2 System View
2-1 Front View
System Overview table -1
Number Component
1 Touch Screen
2 MSR (Option)
3
OSD Button for OSD menu selection
From left to right button:
4 Stand Hole for cable management
4
2-2 Rear View
System Overview table -2
Number Component
5 VFD Module (option)
6 Stand (with cable management and power adapter holder bracket)
7 Cable Outlet
8 VFD Cover (VFD module installation location)
9 VESA hole for stand and wall-mount kit installation
5
2-3 Bottom View
System Overview table -3
Number Component
9 Easy-Service Retaining Bracket for Power Adapter
10 Rubber feet
Inhaltsverzeichnis
Andere POS-X Touch-Terminal Handbücher
Beliebte Touch-Terminal Handbücher anderer Marken
Wincor Nixdorf
Wincor Nixdorf iPOS plus Advanced Bedienungsanleitung
Ingenico
Ingenico AXIUM EX4000 Bedienungsanleitung
Heisei Electronics
Heisei Electronics Q-POS 815 Bedienungsanleitung
Amano
Amano MTX-15 Bedienungsanleitung
FLOWBIRD
FLOWBIRD CWT Compact Touch Bedienungsanleitung
Demco
Demco SP7 Bedienungsanleitung
Motorola
Motorola MTP850 Bedienungsanleitung
YASKAWA
YASKAWA 62H-MDC0 Bedienungsanleitung
MVG industries
MVG industries NeptuLink Bedienungsanleitung
Price Industries Limited
Price Industries Limited FDC Gebrauchsanweisung
Honeywell
Honeywell TemaKey Bedienungsanleitung
EBN
EBN BPC65-B-A16G Bedienungsanleitung