POS-X ION TP5 Bedienungsanleitung
ION TP5
All-In-One Terminal
User’s Manual
v1.2
ii
Copyright 2015
All Rights Reserved
Manual Version 1.2
Part Number: TP5
The information contained in this document is subject to change without notice.
We make no warranty of any kind with regard to this material, including, but not limited
to, the implied warranties of merchantability and fitness for a particular purpose.
We shall not be liable for errors contained herein or for incidental or consequential
damages in connection with the furnishing, performance, or use of this material.
This document contains proprietary information that is protected by copyright. All rights
are reserved. No part of this document may be photocopied, reproduced or translated
to another language without the prior written consent of the manufacturer.
TRADEMARK
Intel®, Pentium® and MMX are registered trademarks of Intel® Corporation.
Microsoft® and Windows® are registered trademarks of Microsoft Corporation.
Other trademarks mentioned herein are the property of their respective owners.
Safety
IMPORTANT SAFETY INSTRUCTIONS
1. To disconnect the machine from the electrical power supply, shut the terminal down
and remove the power cord plug from the wall socket. The wall socket must be easily
accessible and in close proximity to the machine.
2. Read these instructions carefully. Save these instructions for future reference.
3. Follow all warnings and instructions marked on the product.
4. Do not use this product near water.
5. Do not place this product on an unstable cart, stand, or table. The product may fall,
causing injury or serious damage to the product.
6. Slots and openings in the cabinet and the back or bottom are provided for ventilation
to ensure reliable operation of the product and to protect it from overheating. These
openings must not be blocked or covered. The openings should never be blocked by
placing the product on a bed, sofa, rug, or other similar surface. This product should
never be placed near or over a radiator or heat register or in a built-in installation
unless proper ventilation is provided.
7. This product should be operated from the type of power indicated on the electrical
safety label. If you are not sure of the type of power available, consult your dealer or
local power company.
8. Do not allow anything to rest on the power cord. Do not place this product where
persons will walk on the cord.
9. Never push objects of any kind into this product through cabinet slots as they may
touch dangerous voltage points or short out parts that could result in a re or electric
shock. Never spill liquid of any kind on the product.
iii
CE MARK
This device complies with the requirements of the EEC directive 2004/108/EC with
regard to “Electromagnetic compatibility” and 2006/95/EC “Low Voltage Directive”.
FCC
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may
cause undesired operation.
CAUTION ION LITHIUM BATTERIES
There is a danger of explosion if the battery is replaced incorrectly. Replace only
with the same or equivalent type recommended by the manufacturer. Discard used
batteries according to the manufacturer’s instructions.
Battery Caution
Risk of explosion if battery is replaced by an incorrectly type. Dispose of used battery
according to the local disposal instructions.
Safety Caution
Note: To comply with IEC60950-1 Clause 2.5 (limited power sources, L.P.S) related
legislation, peripherals shall be 4.7.3.2 “Materials for re enclosure” compliant.
4.7.3.2 Materials for re enclosures
For MOVABLE EQUIPMENT having a total mass not exceeding 18kg.the material of a
FIRE ENCLOSURE, in the thinnest signicant wall thickness used, shall be of V-1 CLASS
MATERIAL or shall pass the test of Clause A.2.
For MOVABLE EQUIPMENT having a total mass exceeding 18kg and for all STATIONARY
EQUIPMENT, the material of a FIRE ENCLOSURE, in the thinnest significant wall
thickness used, shall be of 5VB CLASS MATERIAL or shall pass the test of Clause A.1
iv
LEGISLATION AND WEEE SYMBOL
2012/19/EU Waste Electrical and Electronic Equipment Directive on the treatment,
collection, recycling and disposal of electric and electronic devices and their
components.
The crossed dust bin symbol on the device means that it should not be disposed of
with other household wastes at the end of its working life. Instead, the device should
be taken to the waste collection centers for activation of the treatment, collection,
recycling and disposal procedure.
To prevent possible harm to the environment or human health from uncontrolled waste
disposal, please separate this from other types of wastes and recycle it responsibly to
promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product,
or their local government ofce, for details of where and how they can take this item for
environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of
the purchase contract.
This product should not be mixed with other commercial wastes for disposal.
v
USER INFORMATION REQUIREMENTS
Products shall be shipped with informational materials to notify customers of the
following:
1. A description of power management settings that have been enabled by default.
2. A description of the timing settings for various power management features
and instructions for properly waking the product from Sleep Mode.
Products shall be shipped with one or more of the following:
1. A list of default power management settings.
2. A note stating that default power management settings have been selected for
compliance with ENERGY STAR (within 15 min of user inactivity for the dis-
play, within 30 min for the computer, if applicable per Table2), and are recom-
mended by the ENERGY STAR program for optimal energy saving.
3. Information about ENERGY STAR and the benets of power management, to
be located at or near the beginning of the hard copy or electronic user manual,
or in a package or box insert.
The power management feature allows the computer to initiate a low-power or
“Sleep” mode after a period of user inactivity. When used with an external
ENERGY STAR qualied monitor, this feature also supports similar power
management features of the monitor. To take advantage of these potential energy
savings, the power management feature can be set to behave in the following
ways when the system is operating on AC power.
● Turn off the display after 15 minutes.
● Initiate Sleep after 30 minutes.
vi
Revision History
Changes to the original user manual are listed below:
Revision Description Date
1.0 • Initial release July 2015
1.1 • Instruction on locking the back cover added
• Instruction on installing the LCM module added April 2016
1.2 • Rear 8” LCD installation instructions and specica-
tions added September 206
vii
Table of Contents
1. Packing List.............................. 1
1-1. Standard Accessories..............................................1
1-2. Optional Accessories ...............................................2
2. System View ............................. 3
2-1. Front View ...............................................................3
2-2. Side View.................................................................5
2-3. IO Port View ............................................................6
3. Assembly & Disassembly ....... 7
3-1. Unlocking the Back Cover .......................................7
3-2. Removing the Rear Housing ...................................7
3-3. Installing the Power Adapter....................................8
3-4. Dimensions..............................................................9
4. Peripheral Installation ............ 10
4-1. Installing the MSR .................................................10
4-2. Installing the LCM Module ...................................... 11
4-3. Loading the Thermal Printer Paper ........................12
4-4. Installing the Rear LCD Module..............................13
5. Specications ......................... 14
viii
6. Jumper Settings...................... 16
6-1. Printer Board Settings ............................................16
Appendix: Driver Installation ...... 17
ix
The page is intentionally left blank.
1
1. Packing List
1-1. Standard Accessories
a. TP5 System
b. Power adapter
c. Power cord
d. RJ45-DB9 cable (x1)
e. Driver CD
ab
cd
e
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere POS-X Touch-Terminal Handbücher
Beliebte Touch-Terminal Handbücher anderer Marken
Wincor Nixdorf
Wincor Nixdorf iPOS plus Advanced Bedienungsanleitung
Ingenico
Ingenico AXIUM EX4000 Bedienungsanleitung
Heisei Electronics
Heisei Electronics Q-POS 815 Bedienungsanleitung
Amano
Amano MTX-15 Bedienungsanleitung
FLOWBIRD
FLOWBIRD CWT Compact Touch Bedienungsanleitung
Demco
Demco SP7 Bedienungsanleitung
Motorola
Motorola MTP850 Bedienungsanleitung
YASKAWA
YASKAWA 62H-MDC0 Bedienungsanleitung
MVG industries
MVG industries NeptuLink Bedienungsanleitung
Price Industries Limited
Price Industries Limited FDC Gebrauchsanweisung
Honeywell
Honeywell TemaKey Bedienungsanleitung
EBN
EBN BPC65-B-A16G Bedienungsanleitung