POSIFLEX LM-6101E Series Bedienungsanleitung

LM-6101E Series

LCD Monitor

USER’S MANUAL

Rev. : Original

FCC NOTICE

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions manual, may cause interference to radio communications. It has been tested and found to comply with

limits for a Class A digital device pursuant to subpart J of Part 15 of FCC Rules, which are designed to provide

reasonable protection against interference when operated in a commercial environment. Operation of this equipment in a

residential area is likely to cause interference in which case the user at his own expense will be required to take whatever

measures to correct the interference.

WARRANTY LIMITS

Warranty will terminate automatically when the machine is opened by any person other than the authorized technicians.

The user should consult his/her dealer for the problem happened. Warranty voids if the user does not follow the

instructions in application of this merchandise. The manufacturer is by no means responsible for any damage or hazard

caused by improper application.

ABOUT THIS MANUAL

This manual assists the user to utilize the LCD Monitor LM-6101E. These series provide versatile font formats and

support various instruction sets. These series of products receive instructions in serial communication protocols and is

capable of entering pass through mode so that all instructions received pass on to next connected serial device if properly

configured.

The manufacturer of the LM-6101E series heartily apologizes to the user for reserving the right to change or to modify

this manual without notice due to the rapid and constant progress and improvement on science and technology. The user

may always obtain the most up to date information through any of our web sites:

http://www.posiflex.com.tw, http: //www.posiflexuk.com, http://www.posiflexusa.com.

TRADE MARKS AND SERVICE MARKS

All brand and product names and trademarks are the property of their respective holders.

©Copyright Posiflex Technology, Inc. 2016

P/N: 19650902010

I. FEATURES

•Light weight and high luminance LCD monitor for industrial and

commercial use as well as application covers POS, POIS (Kiosk),

factory automation, etc.

•High-quality 12” TFT LCD panel with scaling up function for full

screen display.

•Resolution: 1024 x 768.

•Tilt and swivel adjustable construction for LM-6101E series.

•Easy maintenance structure allowing easy cleaning.

•LM-6101E is a 12.1” LCD monitor with tilt adjust for 2nd display

attached to FT/TP series POS system.

•Support VGA interface and powered through interface cable for LM-

6101E.

II. MODEL NUMBERS

LM-6101E: 12.1” LCD Monitor w/ joining mechanism for Posiflex

touch terminals, such as TP-8000/TP-8300 series Gen 5 base.

III. INSTALLATION

LM-6101E series

Base Mount for TP Series

1. Screw on the pivot screw through a split washer and then through a

plain washer for LM-6101E.

LM-6101E on back

of TP-8000/TP-8300

2. Aim the 2 holes of LM-6101E to the 2 holes of the 5th Gen base for

Posiflex TP-8000/TP-8300 terminal per instruction of the terminal.

Then Fix the terminal onto the 5th Gen base with the 2 screws.

3. Adjust for best viewing tilt angle and engage the on screen display

(OSD) adjustment for best display effect whenever necessary. The

monitor will sign for “No Signal” status and go into power saving

mode in 5 seconds when there is no video signal. The display will

come back when the signal does.

IV. OSD

OSD Menu Introduction

A. LM6101E OSD Button

Gen5 base

Pivot Screw

LM-6101E

EXT button

“+” button

OSD button

Power button

“-“ button

B. Power & OSD buttons

The buttons at the right side of LCD monitor are for the OSD (On

Screen Display) control operations and LCD screen power control as in

the right picture and are explained below.

“OSD” button:To enter OSD menu.

“EXT” button:To Exit the option functions.

“+” button:To increase setting.

“ - “ button: To decrease setting; auto tune feature.

“Power” button: To turn the monitor power ON/OFF.

To help you get started with the OSD menu, the following points are

guidelines you are suggested to go through:

1. Firstly, press the OSD button to access the OSD menu.

2. Scroll through OSD menu options using either the “

＋

” or “

－

”

button.

3. Press the OSD button to select the particular menu option of

interest. It will lead you to its sub-menu page if the selected menu

option contains sub-menu items.

4. Under the selected menu item with available sub-menu items, use

the “

＋

” or “

－

” button to switch among different items. Then,

press the OSD button to select the sub-menu item which you

intend to adjust.

5. Use the “

＋

” or “

－

” button to adjust the value of the selected

OSD item. Then, press the OSD button to save settings.

6. Press the EXT button to exit from the current configuration.

C. OSD Options

The OSD options are provided for you to do easy setting of the LCD

monitor. Please refer to the following table for further explanation of

those accessible items in the LM-6101E‘s OSD.

OSD Menu Options

Sub-menu items & Description

Picture

Backlight

Press the “

＋

” button to increase backlight

intensity;

Press the “－” button to decrease backlight

intensity.

Brightness

Press the “

＋

” button to increase brightness;

Press the “－” button to decrease brightness.

Contrast

Press the “

＋

” button to increase contrast;

Press the “－” button to decrease contrast.

Sharpness

Press the “

＋

” button to increase sharpness;

Press the “

－

” button to decrease sharpness.

Display

Auto Adjustment

Execute the auto-tune function for OSD

menu, which will automatically perform fine

tune of the image quality for optimizing

screen performance.

H Position

Press the “

＋

” button to move the screen to

the right;

Press the “－” button to move the screen to

the left.

V Position

Press the “

＋

” button to move the screen up;

Press the “－” button to move the screen

down.

OSD Menu Options

Sub-menu items & Description

Pixel Clock

Use the “

＋

” or “－” button to adjust the

Clock setting for VGA input.

Phase

Use the “

＋

” or “－” button to adjust the

Phase setting for VGA input.

RGB

Gamma

Press the “

＋

” button to increase gamma

value;

Press the “－” button to decrease gamma

value.

Color Temp

Press the “

＋

” button to increase color

temperature;

Press the “－” button to decrease color

temperature.

Other

Reset

Restore the current menu back to the default

setting.

Menu Time

Specify the length of time for OSD menu to

stay active on the screen.

Language

Specify the language used in the OSD menu.

Information

Display information regarding display resolution,

horizontal/vertical sync frequency, pixel clock

(PCLK), etc.

SUPPORTED DISPLAY MODES

For VGA signals beyond the supported display modes, there will be a

message “Out Of Range” on the middle of screen. Maximum supported

color depth is 18 bits or 262,144 colors. Supported display modes are

illustrated in the table:

Display Resolution Refresh Rate (Hz)

Horizontal

Frequency (KHz)

640*400

37.9

640*480

31.5

37.9

37.5

720*400

37.9

800*600

35.1

37.9

48.1

46.9

1024*768

48.4

56.5

<MEMO>

Inhaltsverzeichnis

Andere POSIFLEX Monitor Handbücher

POSIFLEX

POSIFLEX LM-2010 Bedienungsanleitung

POSIFLEX

POSIFLEX PD-6 07R Series Bedienungsanleitung

POSIFLEX

POSIFLEX LM-2010 Bedienungsanleitung

POSIFLEX

POSIFLEX LM-4011U Bedienungsanleitung

POSIFLEX

POSIFLEX PD-350R Bedienungsanleitung

POSIFLEX

POSIFLEX LM-6200 Series Bedienungsanleitung

POSIFLEX

POSIFLEX LM-6807U Bedienungsanleitung

POSIFLEX

POSIFLEX LM-3010F/HS Bedienungsanleitung

POSIFLEX

POSIFLEX LM-6601 Bedienungsanleitung

POSIFLEX

POSIFLEX LM-6801E Bedienungsanleitung

POSIFLEX

POSIFLEX TM4000 Series Bedienungsanleitung

POSIFLEX

POSIFLEX LM6112 Bedienungsanleitung

POSIFLEX

POSIFLEX PD – 201 Bedienungsanleitung

POSIFLEX

POSIFLEX PD-2100 Series Bedienungsanleitung

POSIFLEX

POSIFLEX LM-7112 Bedienungsanleitung

POSIFLEX

POSIFLEX LM-7117 Bedienungsanleitung

POSIFLEX

POSIFLEX LM-4015 Bedienungsanleitung

POSIFLEX

POSIFLEX TM-4010 Bedienungsanleitung

POSIFLEX

POSIFLEX PD-2601 Series Bedienungsanleitung

POSIFLEX

POSIFLEX LM-31 E Series Bedienungsanleitung

POSIFLEX

POSIFLEX TM-4011LVDS Bedienungsanleitung

POSIFLEX

POSIFLEX TM-2008E Bedienungsanleitung

POSIFLEX

POSIFLEX LM-2310 Bedienungsanleitung

POSIFLEX

POSIFLEX LM-6207 Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung