Postek C168 Bedienungsanleitung

C168 Series User’s Manual

FCC Notice

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device

may not cause harmful interference, and (2) this device must accept any interference received, including interference that

may cause undesired operation.

This equipment may generate, use and/or radiate radio frequency energy. If not installed and used in full accordance with

this User’s Manual, interference to radio communications may occur. This equipment complies with the limits for a Class A

Information Technology Equipment pursuant to Part 15 of the FCC Rules, which are designed to provide reasonable

protection against such interference when operated in a commercial environment. Operation of this equipment in a

residential area may also cause interference. In such case the user, at his/her expense, will be required to correct the

interference using whatever means necessary.

Trademarks

POSTEK is a registered trademark by POSTEK Electronics Co., Ltd.

ARM is a registered trademark ofAdvanced RISC Machines Ltd.

Microsoft, Windows are registered trademarks of Microsoft Corporation.

reproduced in any form without the prior written permission of Postek. No patent liability is assumed, with respect to the use

of the information contained herein.

POSTEK C168 Series Label Printer User’s Manual

9th edition January 2015

Disclaimer

This manual has been validated and reviewed for accuracy. The instructions and descriptions it contains are accurate for the

Postek C168 Series label printer at the time of this manual’s distribution. However, succeeding printers and manuals are

subject to change without notice. Postek assumes no liability for damages incurred directly or indirectly from errors,

omissions or discrepancies between the printer and this manual.

Although this manual describes and details many issues which could possibly occur, the manufacturer cannot warrant against

unpredictable conditions during the printing process. For problems such as the printer not working, lost or unclear print

content, etc., the manufacturer and resellers are responsible for correcting these issues (according to Postek Printer Warranty

Clauses). In no event shall the manufacturer or the resellers involved be liable for any damages whatsoever (including,

without limitation, damages for loss of business profits, business interruption, loss of business information, or other

pecuniary loss) arising from the use of, the results of use or inability to use this product, even if the manufacturer has been

advised of the possibility of such damages.

C168 Series User’s Manual

Important Safety Instructions

♦Only qualified and trained service technicians should attempt to repair the printer.

♦Do not place the printer on or near a heat source.

♦Be sure that the output of the power adapter is 24VDC and your power source matches the rating listed on the power

adapter. Be certain your power source is grounded.

♦To avoid getting an electric shock, do not use a worn or damaged power cord. If the power cord becomes damaged or

frayed, replace it immediately.

♦Do not insert anything into the ventilation slots or openings on the printer.

♦The printer and power adapter should never be operated in a location where either one can get wet. Personal injury may

result.

♦The printhead becomes hot while printing. To protect from damaging the printhead and risk of personal injury, avoid

touching the printhead.

♦To get increased printhead longevity and higher quality printouts, always use approved labels, tags and thermal transfer

ribbons. Approved supplies can be ordered from your Postek authorized reseller.

♦Static electricity that accumulates on the surface of the human body or other surfaces can damage or destroy the

printhead or electronic components in this device. DO NOT touch the printhead or the electronic components with bare

hands.

♦Place the printer on a flat, firm, solid surface.

♦Never operate in a high temperature environment.

♦Turn off the power when not in use for extended periods.

♦Follow all recommendations and setup instructions included in this manual.

Warnings:

This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may

be required to take adequate measures (see FCC Notice).

Static electricity that accumulates on the surface of the human body or other objects can damage the print head or electronic

components in the C168 Series printer. Observe proper electrostatic safety precautions when handling.

C168 Series User’s Manual

Table of Contents

Preface ...............................................................................................................................................................1

Important Notice, Read Me First....................................................................................................................1

Chapter 1: Introduction...................................................................................................................................2

Printer Specifications..........................................................................................................................................................2

Specifications for Power Adapter .......................................................................................................................................2

Contents of Box..................................................................................................................................................................3

Packing List ................................................................................................................................................................3

Chapter 2: Setup and Use................................................................................................................................ 5

Setting up the Printer .......................................................................................................................................................... 5

Main Parts and Structures...........................................................................................................................................5

Connecting the Printer................................................................................................................................................7

Interface Connection...................................................................................................................................................8

Loading the Ribbon ............................................................................................................................................................8

Loading the Media............................................................................................................................................................14

Standard Mode..........................................................................................................................................................14

Peel-off Mode ...........................................................................................................................................................19

Cutting Mode............................................................................................................................................................22

Using the External Media Stand....................................................................................................................................... 23

Install the Media Stand .............................................................................................................................................23

Load Media Using External Media Stand.................................................................................................................24

Adjusting the Position of Media Sensor ...........................................................................................................................26

Chapter 3: Operations and Settings..............................................................................................................28

Basic Operations...............................................................................................................................................................28

Power Switch............................................................................................................................................................28

The Front Panel.........................................................................................................................................................28

Advanced Functions .................................................................................................................................................29

Windows Driver................................................................................................................................................................ 31

Label Software..................................................................................................................................................................31

Chapter 4: Maintenance ................................................................................................................................ 32

Cleaning the Printhead......................................................................................................................................................32

Cleaning the Platen Roller................................................................................................................................................ 33

Cleaning the Printer Interior .............................................................................................................................................33

Chapter 5: Troubleshooting...........................................................................................................................34

Error Indications...............................................................................................................................................................34

Miscellaneous...................................................................................................................................................................35

Vertical Blank Lines Appear.....................................................................................................................................35

Printer Timeout Error Message.................................................................................................................................35

Data Sent but Not Printing........................................................................................................................................35

Poor Printing Quality................................................................................................................................................36

Recovery...................................................................................................................................................................36

Appendix

A: Interface Specifications ...........................................................................................................37

C168 Series User’s Manual

Appendix B:ASCII Table.............................................................................................................................. 39

Preface, Important Notice C168 Series User’s Manual

Preface

Your POSTEK C168 Series compact barcode label printer features innovative technology and superior quality workmanship.

Boasting a rigid structure, a highly reliable motor and transmission system, and a large ribbon capacity of 360M, users enjoy

minimal downtime and low service cost. With intuitive operations, the C168 is ideal for a wide range of applications.

This manual explains how to set up and begin using your C168 Series printer. It also provides detailed information on

configuring your printer, basic operations, care and troubleshooting.

Please read this manual carefully before using the POSTEK C168 Series printer.

Important Notice, Read Me First

The thermal printhead can be easily damaged due to its precision construction. A printhead damaged by misuse is not

covered under the terms of the warranty. To ensure longevity of the printhead, please note the following:

1. DO NOT scrape or use tools that might damage the printhead surface.

2. To protect from corroding the printhead, DO NOT touch the printhead with bare hands.

3. DO NOT use thermal paper or thermal transfer ribbons which contain Na, K or Cl.

4. Keep printhead from any form of liquid or dampness.

5. Only use a cotton swab dipped in anhydrous isopropyl alcohol to clean the printhead.

6. Always use high-quality consumables:

•When the printhead module is closed, pressure is placed directly onto the printhead; dirt such as paper scraps, sand,

dust and glue can scrape or damage the printhead.

•The printhead is also easily damaged by static electricity, which may be generated by poor quality ribbons.

7. Always inspect consumables for high quality before purchasing.

Note: The C168 Series printer functions under Direct Thermal or Thermal Transfer print methods. Thermal Transfer

is set as the factory default (requires ribbon for printing). However, if you need to print on Direct Thermal materials

(ribbon is not required), please contact your printer supplier or service provider to reduce the printhead pressure. This

can protect your printhead from early performance deterioration due to direct contact with the thermal media. Any

physical printhead damage caused by direct thermal printing is not covered under warranty.

Chapter 1: Introduction C168 Series User’s Manual

Chapter 1: Introduction

Printer Specifications

Mode

C168/200s

C168/300s

Printing method Thermal Transfer

Printing resolution 203 dpi (8 dots/mm) 300 dpi (11.8 dots/mm)

Max printing speed 4 ips (101.6 mm) 3 ips (76.2 mm/s)

Max printing width 4.25″(108 mm) 4.17″(106 mm)

Max printing length 157″(4000 mm) 79″(2000 mm)

Memory 8 MB FLASH ROM, 16 MB SDRAM

Media

Roll-feed, die-cut, continuous, fan-fold, tags, tickets in plain paper or thermal paper

Width：4.33“ (110 mm) max., 0.98” (25 mm) min.

Supply roll: OD 4″(102 mm) max., ID 1″(25.4 mm) min.

Thickness: 0.003″

～

0.007″(0.08

～

0.18 mm), including liner

Ribbon

Wax, Wax/Resin, Resin

Ribbon roll: OD 3″ (76.2 mm) max., ID 1″ (25.4 mm) core

Max width: 4.33” (110 mm); Max length: 984’ (300 M)

Fonts Five built-in dot matrix ASCII fonts, user-downloadable TrueType Fonts

Bar Code Types

1D Barcode: Code 39, Code 93, Code 128/subset A,B,C, Codabar, Interleave 2 of 5, UPC A/E 2 and 5 add-on,

EAN-13/8/128, UCC-128.

2D Barcode: MaxiCode, PDF417, Data Matrix, QR Code.

Media sensor Reflective (Adjustable)/Transmissive

Interfaces RS-232 Serial, USB 2.0

Power rating* 24 VDC, 2.5 A

Weight 6.17lbs (2.8 kgs)

Dimensions W 9.3 x D 11.4 x H 7.8 inches (W 236 x D 291 x H 199 mm)

Operation environment

Temperature: 32°F ~ +104°F (0°C ~ 40°C)

Relative humidity: 5% - 85% non condensing

Storage environment

Temperature: -40°F ~ +140°F (-40°C ~ 60°C)

Relative humidity: 5% - 85% non condensing

Optional items Centronics Parallel Interface, 10/100Mb Ethernet, Rotary Cutter, External Rewinder, and Media Guide Adaptor

Specifications for Power Adapter

Input AC 100~240 V, 50~60 Hz

Output DC 24 V, 2.5 A

Environment 0°C ~ 40°C

Chapter 1: Introduction C168 Series User’s Manual

Contents of Box

Inspect the shipping carton(s) for possible shipping damage, if damage is discovered, notify the shipping company to

report the nature and extent of the damage.

Please check the items according to the Packing List. If there are any items missing, notify your authorized reseller.

Packing List

C168 Series Printer 1 pc

External Media Stand 1pc

Power Adapter 1 pc

USB interface cable 1 pc

Media Spindle 1 pc

Media Roll Guides 2 pcs

Media Core Adapters 2 pcs

Ribbon Spindles 2 pcs

Empty Core 1 pc

Quick Start Guide 1 pc

*CD-ROM pack 1 pc

*Note: CD-ROM pack includes the printer driver, label software, C168-Series User’s Manual, “How to install” video and

Programming Manual.

Chapter 1: Introduction C168 Series User’s Manual

External Media Stand

Figure 1: Printer and Accessories

Ribbon Spindles

C168 Series Printer

Power Adapter

Media Spindle

Core Adapters

Media

Roll Guides

CD-Rom

Warranty Card

USB Cable

,Empty Core

Chapter 2: Setup and Use C168 Series User’s Manual

Chapter 2: Setup and Use

Setting up the Printer

Before setting up the printer consider the following:

1. Make sure there is adequate space around the printer for loading consumables and proper ventilation.

2. Make sure the printer is close to the host so the interface cable is easily accessible at either end.

Main Parts and Structures

Figure 2

1. READY Indicator 4. PAUSE Button 7. Media Exit

2. MEDIA Indicator 5. FEED Button 8. Cover Handle

3. RIBBON Indicator 6. CANCEL Button 9. Top Cover

Andere Handbücher für C168

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Postek Barcode-Lesegerät Handbücher

Postek

Postek C168 Bedienungsanleitung

Beliebte Barcode-Lesegerät Handbücher anderer Marken

POSMicro

POSMicro Datalogic PowerScan D7100 Bedienungsanleitung

Marson

Marson MT780 Kurzanleitung zur Einrichtung

NCR

NCR RealPOS Bedienungsanleitung

Motorola

Motorola SE3300 Kurzanleitung zur Einrichtung

Element

Element P130BT Bedienungsanleitung

Motorola

Motorola Symbol LS3008 Installations- und Betriebshandbuch

Meec tools

Meec tools OBD-II / VAG Bedienungsanleitung

SICK

SICK CLP 100 Bedienungsanleitung

Royal Tag SA

Royal Tag SA I-Read Bedienungsanleitung

Welch Allyn

Welch Allyn IMAGETEAM 3800 Bedienungsanleitung

Meteor

Meteor 8310 Bedienungsanleitung

Denso

Denso BHT-500B Bedienungsanleitung

Datalogic

Datalogic Heron HD3130 Bedienungsanleitung

Motorola

Motorola MP6000 Montageanleitung

Newland

Newland NLS-HR15-BT Bedienungsanleitung

ARTDEV

ARTDEV AS-1310 Bedienungsanleitung

Aopos

Aopos AS290 Bedienungsanleitung

ENS

ENS 367-5455 Bedienungsanleitung