8885600 Square Head Style Strut Spring Compressor V1.0
6 For technical questions call 1-800-665-8685
7. Secure the other strut spring compressor in the same manner on the
opposite side of the spring.
8. Tighten each strut spring compressor by turning the tightening nut (G)
with a wrench. Switch between each strut spring compressor every
few turns to compress the spring evenly.
9. Once the task is completed, loosen each strut spring compressor,
switching between each one to decompress every few turns until the
spring is completely decompressed.
10. Open the bottom then top locking pin and remove the strut spring
compressor. Repeat on other side.
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good condition is efficient, easier
to control and will have fewer problems.
2. Inspect the tool components periodically. Repair or replace damaged or
worn components. Only use identical replacement parts when
servicing.
3. Maintain the tool’s labels and name plates. These carry important
information. If unreadable or missing, contact Princess Auto Ltd. for
replacements.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
LUBRICATION
Inspect and lubricate the tool when required. When not in use for an
extended period, apply a thin coat of lubricant to the steel parts to avoid
rust. Remove the lubricant before using the tool again.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
Contact your local municipality for a list of disposal facilities or by-laws for
electronic devices, batteries, oil or other toxic liquids.
TROUBLESHOOTING
Visit a Princess Auto Ltd. location for a solution if the tool does not function
properly or parts are missing. If unable to do so, have a qualified technician
service the tool.
