Power works LMG302 Bedienungsanleitung

LMG302

OriginalInstructions / Übersetzung der Originalanweisungen/ Traducciónde las instrucciones originales/ Traduzione delle istruzioni originali/ Traductiondes

instructions d'origine/ Vertaling van de originele gebruiksaanwijzing/ Alkuperäisten ohjeiden käännös/ Översättning av original instruktionerna/ Produsentens

instruksjoner/ Oversættelse af de originale vejledninger / Překladoriginálníhonávodu/ Prekladoriginálneho návodu / Prevod originalnihnavodil/ Prijevod

izvornih uputa/ Az eredeti utasítás fordítása/ Превод на оригиналните инструкции/ Orijinal Talimatların Tercümesi/ Originaalkasutusjuhendi tõlge

OPERATOR MANUAL / BEDIENUNGSHANDBUCH / MANUAL DEL OPERARIO /

MANUALE DELL’OPERATORE / MANUEL OPÉRATEUR / GEBRUIKSAANWIJZING /

KÄYTTÖOPAS / ANVÄNDARHANDBOK / BRUKERVEILEDNING / BRUGSVEJLEDNING /

NÁVOD K OBSLUZE / NÁVOD NA OBSLUHU / UPORABNIŠKI PRIROČNIK / PRIRUČNIK

ZA RUKOVANJE / HASZNÁLATI ÚTMUTATÓ / РЪКОВОДСТВО НА ОПЕРАТОРА /

KULLANIM KILAVUZU / KASUTUSJUHEND

P24LM32

1 Description.................................... 4

1.1 Purpose......................................................4

1.2 Overview.................................................... 4

2 Safety............................................ 4

3 Installation..................................... 4

3.1 Unpack the machine...................................4

3.2 Install the upper handle .............................4

3.3 Install the grass catcher............................. 4

3.4 Set the blade height................................... 4

3.5 Install the battery pack............................... 5

3.6 Remove the battery pack........................... 5

4 Operation.......................................5

4.1 Start the machine....................................... 5

4.2 Stop the machine....................................... 5

4.3 Empty the grass catcher.............................5

4.4 Operate on slopes......................................5

4.5 Operation tips.............................................5

5 Maintenance..................................6

5.1 General maintenance.................................6

5.2 Replace the blade...................................... 6

5.3 Store the machine...................................... 6

6 Troubleshooting.............................6

7 Technical data............................... 7

8 Warranty........................................7

9 EC Declaration of conformity.........7

English EN

1 DESCRIPTION

1.1 PURPOSE

This machine is used for domestic lawn mowing. The

cutting blade must be approximately parallel to the

ground. All four wheels must touch the ground while you

mow.

1.2 OVERVIEW

Figure 1-7.

1Switch box handle

2Start button

3Motor control cable

4Upper handle

5Lower handle

6Front wheel

7Rear wheel

8Grass catcher

9Knob

10 Nut

11 Grass catcher handle

12 Slot

13 Rear discharge door

14 Rear discharge opening

15 Battery door

16 Blade

17 Mounting screw

18 Spacer

19 Blade locating tube

20 Front axle

21 Rear axle

22 Battery pack

2 SAFETY

WARNING

Make sure that you do/obey all safety instructions.

Refer to Safety Manual.

3 INSTALLATION

WARNING

Do not change or make accessories that are not

recommended by the manufacturer.

WARNING

Do not put in the safety key or the battery pack until

you assemble all the parts.

3.1 UNPACK THE MACHINE

WARNING

Make sure that you correctly assemble the machine

before use.

WARNING

• If the parts have damage, do not use the machine.

• If you do not have all the parts, do not operate the

machine.

• If the parts are damaged or missing, speak to the

service center.

1. Open the package.

2. Read the documentation in the box.

3. Remove all the unassembled parts from the box.

4. Remove the machine from the box.

5. Discard the box and package in compliance with

local regulations.

3.2 INSTALL THE UPPER HANDLE

Figure 2.

1. Align the holes in the upper handle and the lower

handle.

2. Put the nuts through the holes.

3. Tighten the knobs onto the nuts.

4. Do the same operation on the other side.

3.3 INSTALL THE GRASS CATCHER

Figure 3

1. Put the four screws into the washers to attach the

bracket.

2. Move the bracket into the groove.

3. Align the latches and the slots of the top and lower

halves of the grass catcher and push the two halves

together to interlock.

4. Push the latch of the handle into the grass catcher.

5. Open the rear discharge door and hold it.

6. Hold the the grass catcher by its handle and put the

hooks over the slots.

7. Close the rear discharge door.

3.4 SET THE BLADE HEIGHT

The machine can be set to different blade heights.

Figure 4

1. Turn the machine over to access the front and rear

cutting height adjustment.

2. Push the axle forward to unlock the cutting height

adjustment.

English

3. Move the axle into one of the three positions. Make

sure that the two sides of the axle are in the same

height.

4. Make sure that the four wheels are assembled in the

same cutting height and scroll smoothly and

unclogged.

3.5 INSTALL THE BATTERY PACK

Figure 5

WARNING

• If the battery pack or charger is damaged, replace

the battery pack or the charger.

• Stop the machine and wait until the engine stops

before you install or remove the battery pack.

• Read, know, and follow the instructions in the

battery and charger manual.

1. Open the battery door.

2. Align the lift ribs on the battery pack with the

grooves in the battery compartment.

3. Push the battery pack into the battery compartment

until the battery pack locks into place.

4. When you hear a click, the battery pack is installed.

5. Close the battery door.

NOTE

The engine starts only when you put in the safety key.

3.6 REMOVE THE BATTERY PACK

Figure 5

1. Open the battery door.

2. Remove the safety key.

3. Push and hold the battery release button.

4. Remove the battery pack from the machine.

4 OPERATION

WARNING

Wear eye protection during operation.

4.1 START THE MACHINE

Figure 6.

1. Put in the safety key.

2. Push and hold the start button.

3. While you hold the start button, pull the switch box

handle in the direction of the handle bar.

4. Release the start button to start the machine.

4.2 STOP THE MACHINE

Figure 6.

1. Release the bail switch to stop the machine.

WARNING

Wait until the blades fully stop before you start the

machine again. Do not quickly turn the machine off

and on.

WARNING

Always remove the safety key and battery pack after

you complete the work.

4.3 EMPTY THE GRASS CATCHER

1. Stop the machine.

2. Remove the safety key.

3. Remove the battery pack.

4. Open the rear discharge door and hold it.

5. Hold the grass catcher by its handle and unhook it

from the slots.

6. Close the rear discharge door.

7. Empty the grass catcher.

4.4 OPERATE ON SLOPES

WARNING

Do not mow on the slopes with decline more than 15°.

If you are not comfortable, do not mow on a slope.

WARNING

Please keep a low self-propelled speed when you

mow on a slope.

• Do not go up and down on a slope when you mow

across the face of the slope. Be careful when you

change the direction on a slope.

• Monitor the holes, ruts, rocks, and other hidden

objects that can cause you to fall. Remove all

obstacles such as rocks and tree limbs.

• Make sure that your footing is stable. If you are out

of balance, release the bail switch immediately.

• Do not mow near drop-offs, ditches, or

embankments.

4.5 OPERATION TIPS

• Do not try to override the operation of the start

button or bail switch.

• Do not tilt the machine when you start it.

• Do not put hands or feet near or below the turning

parts.

• Keep the discharge chute clean.

English EN

• Do not cut wet grass.

• Higher blade height is necessary for new or thick

grass.

• Clean the bottom of the mower deck after each use.

Remove grass clippings, leaves, dirt, and other

debris.

5 MAINTENANCE

WARNING

Remove the safety key and battery pack from the

machine before maintenance.

WARNING

Keep the engine and battery pack free from grass,

leaves or too much grease.

CAUTION

Use only approved replacement parts.

CAUTION

Do not let brake fluids, gasoline, petroleum-based

materials touch the plastic parts. Chemicals can cause

damage to the plastic, and make the plastic

unserviceable.

CAUTION

Do not use strong solvents or detergents on the plastic

housing or components.

5.1 GENERAL MAINTENANCE

• Before each use, examine the machine for

damaged, missing, or loose parts such as screws,

nuts, bolts and caps.

• Tighten correctly all the fasteners and caps.

• Clean the machine with a dry cloth. Do not use

water.

5.2 REPLACE THE BLADE

Figure 7.

WARNING

Use only approved replacement blades.

WARNING

Wear heavy gloves or wind cloth around the blade

when you touch the blade.

WARNING

The torque of the impact wrench must be ≥30N•M.

1. Stop the machine.

2. Make sure that the blades fully stop.

3. Remove the safety key and battery pack.

4. Turn the machine to its side.

5. Use a piece of wood to prevent the movement of the

blade.

6. Remove the mounting screw and spacer with a

impact wrench or socket.

7. Remove the blade.

8. Install the new blade. Make sure that the arrows

engage the holes in the blade.

9. Remove the mounting screw and spacer with a

impact wrench or socket.

5.3 STORE THE MACHINE

• Clean the machine before storage.

• Make sure the engine is not hot when you store the

machine.

• Make sure that the machine does not have loose or

damaged parts. If it is necessary, do these steps/

instructions:

• Replace the damaged parts.

• Tighten the bolts.

• Speak to a person of an approved service

center.

• Store the machine in a dry area.

• Make sure that children cannot come near the

machine.

6 TROUBLESHOOTING

Problem Possible cause Solution

The handle is

not in position.

The bolts are not

engaged correct-

ly.

Adjust the height

of the handle

and make sure

that the knobs

and bolts are

aligned correctly.

The machine

does not start.

The battery ca-

pacity is low.

Charge the bat-

tery pack.

The bail switch is

defective.

Replace the bail

switch.

The battery key

is not put in.

Put in the battery

key.

The machine

cuts grass un-

evenly.

The lawn is

rough.

Examine the

mowing area.

The blade height

is not set cor-

rectly.

Move the wheels

to a higher posi-

tion.

English

Problem Possible cause Solution

The machine

does not mulch

correctly.

Wet grass clip-

pings attach to

the deck.

Wait until the

grass dries be-

fore mowing.

The mulch plug

is missing.

Install the mulch

plug.

The machine is

hard to push.

The grass is too

tall, or the blade

height is too low.

Increase the

blade height.

The grass catch-

er and the blade

drags in thick

grass.

Empty the grass

clippings from

the grass catch-

er.

There is a high

vibration in the

machine.

The blade is un-

balanced and

worn.

Replace the

blade.

The engine shaft

is bent.

1. Stop the en-

gine.

2. Remove the

safety key

and battery

pack.

3. Disconnect

the power

source.

4. Inspect for

damage.

5. Repair the

machine be-

fore you start

it again.

The machine

stops during

mowing.

The blade height

is too low.

Increase the

blade height.

The battery pack

is out of power.

Charge the bat-

tery pack.

The grass clip-

pings attach to

the deck or the

blade.

Remove the bat-

tery pack and

check the deck.

Operation tem-

perature of the

machine is too

high.

Cool the ma-

chine.

* If you cannot find the solution to these problems, go to

the service center.

7 TECHNICAL DATA

Voltage 24V

No load speed 3600 / min

Cut width 320 mm

Cut height 20-60 mm

Grass catcher capacity 30 L

Weight (without battery

pack)

8.2 kg

Measured sound pressure

level

LpA= 67.2 dB(A)

Measured sound power

level

LwA= 87.2 dB(A)

Guaranteed sound power

level

LwA.d= 90 dB(A)

Vibration ＜5 m/s2

Battery model BAM701 and other BAM

series

Charger model CAM805 and other CAM

series

8 WARRANTY

(The full warranty terms and conditions can be found on

Powerworks webpage)

The Powerworks warranty is 3 years on the product,

and 2 years on batteries (consumer/private usage) from

the date of purchase. This warranty covers

manufacturing faults. A faulty product under warranty

might be either repaired or replaced. A unit that has

been misused or used in other ways then described in

the owner’s manual might be rejected for warranty.

Normal wear, and wear parts are not considered as

warranty. The original manufacturer warranty is not

affected by any additional warranty offered by a dealer

or retailer.

A faulty product must be returned to the point of

purchase in order to claim for warranty, together with

the proof of purchase (receipt).

9 EC DECLARATION OF

CONFORMITY

Name and address of the manufacturer:

Name: Changzhou Globe Co., Ltd.

Address: No. 65 (3-4) Xinggang Rd., Zhonglou

Zone, Changzhou 213101 China.

Name and address of the person authorised to compile

the technical file:

Name: Peter Söderström

Address: Propellergatan 1, 211 15 Malmö, Sweden

Herewith we declare that the product

Category: Lawn mower

English EN

Model: LMG302

Serial number: See product rating label

Year of Construc-

tion:

See product rating label

• is in conformity with the relevant provisions of the

Machinery Directive 2006/42/EC.

• is in conformity with the provisions of the following

other EC-Directives:

• 2014/30/EU (EMC-Directive)

• 2000/14/EC (Noise Directive) incl.

modifications(2005/88/EC)

Furthermore, we declare that the following (parts/

clauses of) European harmonised standards have been

used:

• EN 60335-1, EN60335-2-77; EN 62233, EN ISO

3744; EN 55014-1; EN 55014-2, ISO 11094

Measured sound power level: 87.2 dB(A)

Guaranteed sound power level: 90 dB(A)

Conformity assessment method to Annex VI Directive

2000/14/EC.

EC type approval to 2000/14/EC: TÜV Industrie Service

GmbH (0036) Westendstrasse 199 Dß80339 Munich

Germany

Place, date: Signature: Ted Qu, Quality Di-

rector

English

1 Beschreibung.............................. 10

1.1 Verwendungszweck................................. 10

1.2 Überblick.................................................. 10

2 Sicherheit.................................... 10

3 Montage...................................... 10

3.1 Maschine auspacken................................10

3.2 Oberen Griff montieren ............................10

3.3 Grasfangvorrichtung montieren................10

3.4 Messerhöhe einstellen............................. 11

3.5 Setzen Sie den Akkupack ein...................11

3.6 Entfernen des Akkupacks.........................11

4 Bedienung................................... 11

4.1 Maschine starten......................................11

4.2 Maschine anhalten................................... 11

4.3 Grasfangvorrichtung entleeren.................11

4.4 Betrieb an Hängen................................... 11

4.5 Tipps zur Bedienung................................ 12

5 Wartung und Instandhaltung....... 12

5.1 Allgemeine Wartung.................................12

5.2 Ersetzen Sie das Messer......................... 12

5.3 Lagern Sie die Maschine..........................12

6 Fehlerbehebung.......................... 13

7 Technische Daten....................... 13

8 Garantie.......................................14

9 EG-Konformitätserklärung...........14

Deutsch

1 BESCHREIBUNG

1.1 VERWENDUNGSZWECK

Diese Maschine wird für das Rasenmähen im Haushalt

eingesetzt. Das Schneidmesser muss etwa parallel zum

Boden liegen. Alle vier Räder müssen beim Mähen den

Boden berühren.

1.2 ÜBERBLICK

Abbildung 1-7.

1Schaltboxgriff

2Start-Taste

3Motorsteuerkabel

4Oberer Griff

5Unterer Griff

6Vorderrad

7Hinterrad

8Grasfangvorrichtung

9Handgriff

10 Mutter

11 Grasfanggriff

12 Aussparung

13 Heckauswurfklappe

14 Heckauswurföffnung

15 Akkufachklappe

16 Messer

17 Befestigungsschraube

18 Abstandhalter

19 Messerfixierrohr

20 Vorderachse

21 Hinterachse

22 Akkupack

2 SICHERHEIT

WARNUNG

Stellen Sie sicher, dass Sie alle Sicherheitshinweise

befolgen.

Siehe Sicherheitshandbuch.

3 MONTAGE

WARNUNG

Nur Zubehör verwenden, das vom Hersteller

Beliebte Rasenmäher Handbücher anderer Marken

RHINO

RHINO 1958 Bedienungsanleitung

Wolf Garten

Wolf Garten Compact plus 40 B Bedienungsanleitung

Cub Cadet

Cub Cadet LTX 1045 Bedienungsanleitung

Craftsman

Craftsman 917.378461 Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Bedienungsanleitung

Challenge

Challenge CH18V2 Betriebsanleitung

TALEN TOOLS

TALEN TOOLS AVR HGM30 Bedienungsanleitung

DEWEZE

DEWEZE ATM-725 Bedienungsanleitung

Weed Eater

Weed Eater 180083 Bedienungsanleitung

Husqvarna

Husqvarna Poulan Pro PP185A42 Bedienungsanleitung

Better Outdoor Products

Better Outdoor Products Quick Series Bedienungsanleitung

Cub Cadet

Cub Cadet 23HP Z-Force 60 Betriebsanleitung

MTD

MTD 795, 792, 791, 790 Bedienungsanleitung

Toro

Toro Groundsmaster 3505-D Bedienungsanleitung

Dennis

Dennis FT 610 Bedienungsanleitung

AIRFORCE

AIRFORCE F-15 Gen 3 Bedienungsanleitung

MTD

MTD 126-220-000 Bedienungsanleitung

Toro

Toro 74806 Bedienungsanleitung