PowerPlus Energy Powerlink Betriebsanleitung

Author: Edwin Cotter Date: 30/09/2021 Ver: 3.1 Page 1 of 7

Powerlink Installation and Operation Guide

Powerlink Setup and Registration Procedure

Author: Edwin Cotter Date: 30/09/2021 Ver: 3.1 Page 2 of 7

Powerlink Installation and Operation Guide

Battery Serial number scanning

Connect the micro USB port from the 5V

power adaptor to the Powerlink port

shown in the picture.

Connect the 5V power adaptor to the

main AC power outlet and Switch it ON.

Wait 10 seconds.

Connect the cable from the LAN modem

(for the internet) to the Powerlink port

shown in the picture.

Note: This port is

next to the 4 USB ports

Author: Edwin Cotter Date: 30/09/2021 Ver: 3.1 Page 3 of 7

Powerlink Installation and Operation Guide

•.

Type the password 12345678

Open the web browser. Type the

address 192.168.0.10:8822

It will open the home page as shown in

the picture.

Open WiFi network menu in mobile or

computer (Interface layout might be

different from the picture). Select PPE-

Powerlink-xxxx (xxxx will be digits)

Press reset data to remove any

previous data from the Files.

Enter the Number of Batteries to be

scanned into the box and press

submit.

Press configuration button, a

screen like the picture will open

Author: Edwin Cotter Date: 30/09/2021 Ver: 3.1 Page 4 of 7

Powerlink Installation and Operation Guide

Battery scanning order should be from top to bottom in the rack.

•Repeat the steps 11 and 12 in every other battery.

•Confirm the number of serial numbers is same as number of batteries in the battery rack.

Take the longest RJ45 cable and

connect the cable into the Powerlink

module side having two RJ45 port.

Note: please make sure, the cable is

connected to the correct port in the

Powerlink

Connect the other RJ45cable end to the

battery need to be scanned.

Press Scan in the Battery management

screen and after couple of seconds, you

will see battery (BMS) serial number as

in the picture.

Author: Edwin Cotter Date: 30/09/2021 Ver: 3.1 Page 5 of 7

Powerlink Installation and Operation Guide

Replace the long RJ45 cable with

suitable length RJ45 cable to connect in

the top battery.

Connect the other end to top battery in

the rack.

Connect another small RJ45 cable to the

remaining port in the same battery.

Connect the other end into next battery

(Daisy chain).

Repeat the daisy chain connection

till last battery.

Author: Edwin Cotter Date: 30/09/2021 Ver: 3.1 Page 6 of 7

Powerlink Installation and Operation Guide

Congratulations!

The battery monitoring configuration procedure is completed

Connect the RJ45 termination connector

in the remaining slot on the last battery.

After 1-2 minutes, go to MultiStat

(available on the home page).

Verify that all the batteries are responding.

If you are not able to see the battery

status in MultiStat window, press

Restart polling button in configuration

page and repeat step 19 & 20.

Author: Edwin Cotter Date: 30/09/2021 Ver: 3.1 Page 7 of 7

Powerlink Installation and Operation Guide

Request Login Details for the Portal

The portal URL is: https://performance.powerplus-energy.com.au:3000/login

To gain your login information for the portal, email “support@powerplus-energy.com.au" and provide the following information:

•Subject line: Portal access request

•PowerLink Serial Number

•Site Name

Our support team will then create a login and email it to you the details once complete.

Andere PowerPlus Energy Netzwerk-Hardware Handbücher

PowerPlus Energy

PowerPlus Energy Powerlink Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung