Powerplus POWDP7020 Bedienungsanleitung

 POWDP7020 EN 
Copyright © 2021 VARO P a g e | 1www.varo.com 
1APPLIANCE................................................................................. 3 
2DESCRIPTION (FIG. A)................................................................ 3 
3PACKAGE CONTENT LIST.......................................................... 3 
4SYMBOLS.................................................................................... 4 
5GENERAL POWER TOOL SAFETY WARNINGS......................... 4 
5.1 Work area.......................................................................................................................4 
5.2 Electrical safety ............................................................................................................4 
5.3 Personal safety .............................................................................................................4 
5.4 Power tool use and care..............................................................................................5 
5.5 Service ...........................................................................................................................5 
6ADDITIONAL SAFETY INSTRUCTIONS...................................... 5 
7OPERATION................................................................................. 6 
7.1 Charging the battery ....................................................................................................6 
7.2 Battery capacity indicator ...........................................................................................7 
7.3 Inserting and removing the battery............................................................................7 
7.3.1 To install:.........................................................................................................................7 
7.3.2 To remove:......................................................................................................................7 
7.4 LED working light .........................................................................................................7 
7.5 Accessories...................................................................................................................7 
7.5.1 Sport ball needle:............................................................................................................8 
7.5.2 Valve adaptor..................................................................................................................8 
8USING THE INFLATOR................................................................ 8 
9CLEANING AND MAINTENANCE................................................ 9 
9.1 Cleaning.........................................................................................................................9 
9.2 Maintenance ..................................................................................................................9 
10 TECHNICAL DATA....................................................................... 9 
11 NOISE .......................................................................................... 9 
12 STORAGE.................................................................................... 9 
13 WARRANTY............................................................................... 10 
14 ENVIRONMENT.......................................................................... 10 

POWDP7020 EN

15 DECLARATION OF CONFORMITY............................................ 11

POWDP7020 EN

AIR PRESSURE PUMP 20V

POWDP7020

1 APPLIANCE

The appliance is intended for inflating car and bicycle tyres, and inflatable items for

games, sport and leisure, but not for pumping up inflatable items with a large

volume, such as inflatable boats and very large air beds.

The appliance is not intended for professional use.

WARNING! Read this manual and general safety instructions carefully

before using the appliance, for your own safety. Your power tool should

only be passed on together with these instructions.

2 DESCRIPTION (FIG. A)

1. Pneumatic hose

2. Ball adapter

3. Tire valve adapter

4. Airbed adapter

5. On/off trigger

6. Battery (not included)

7. Battery release button

8. Digital pressure gauge

9. Air chuck

10. Hose storage area

11. Charger (not included)

12. LED light

3 PACKAGE CONTENT LIST

▪Remove all packing materials

▪Remove remaining packaging and transit supports (if existing)

▪Check the completeness of the packing content

▪Check the appliance, the power cord, the power plug and all accessories for transportation

damages.

▪Keep the packaging materials as far as possible till the end of the warranty period.

Dispose it into your local waste disposal system afterwards.

WARNING Packing materials are no toys! Children must not play with

plastic bags! Danger of suffocation!

1 Air pressure pump

3 adapters 1 flexible connection

1 Manual

When parts are missing or damaged, please contact your dealer.

POWDP7020 EN

4 SYMBOLS

In this manual and/or on the machine the following symbols are used:

Warning / Danger!

Read manual before use.

In accordance with essential applicable safety standards of European

directives.

5 GENERAL POWER TOOL SAFETY WARNINGS

Read all safety warnings and all instructions. Failure to follow all warnings and instructions

may result in electric shock, fire and/or serious injury. Save all warnings and instructions for

future reference. The term "power tool" in the warnings refers to your mains operated (corded)

power tool or battery operated (cordless) power tool.

5.1 Work area

▪Keep work area clean and well lit. Cluttered and dark areas invite accidents.

▪Do not operate power tools in explosive atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or

fumes.

▪Keep children and bystanders away while operating a power tool. Distractions can cause

you to lose control.

5.2 Electrical safety

Always check that the power supply corresponds to the voltage on the

rating plate.

▪Power tool plugs must match the outlet. Never modify the plug in any way. Do not use

any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching

outlets will reduce risk of electric shock.

▪Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges

and refrigerators. There is an increased risk of electric shock if your body is earthed or

grounded.

▪Do not expose power tools to rain or wet conditions. Water entering a power tool will

increase the risk of electric shock.

▪Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power

tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled

cords increase the risk of electric shock.

▪When operating a power tool outdoors, use an extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces the risk of electric shock.

▪If operating a power tool in a damp location is unavoidable, use a residual current device

(RCD) protected supply. Use of an RCD reduces the risk of electric shock.

5.3 Personal safety

▪Stay alert, watch what you are doing and use common sense when operating a power

tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or

POWDP7020 EN

medication. A moment of inattention while operating power tools may result in serious

personal injury.

▪Use safety equipment. Always wear eye protection. Safety equipment such as dust mask,

non-skid safety shoes, hard hat, or hearing protection used whenever conditions require

will reduce personal injuries.

▪Avoid accidental starting. Ensure the switch is in the off position before plugging in.

Carrying power tools with your finger on the switch or plugging in power tools that have

the switch on invites accidents.

▪Remove any adjusting key or wrench before turning the power tool on. A wrench or a key

left attached to a rotating part of the power tool may result in personal injury.

▪Do not overreach. Keep proper footing and balance at all times. This enables better

control of the power tool in unexpected situations.

▪Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and

gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in

moving parts.

▪If devices are provided for the connection of dust extraction and collection facilities,

ensure these are connected and properly used. Use of these devices can reduce dust

related hazards.

5.4 Power tool use and care

▪Do not force the power tool. Use the correct power tool for your application. The correct

power tool will do the job better and safer at the rate for which it was designed.

▪Do not use the power tool if the switch does not turn it on and off. Any power tool that

cannot be controlled with the switch is dangerous and must be repaired.

▪Disconnect the plug from the power source before making any adjustments, changing

accessories, or storing power tools. Such preventive safety measures reduce the risk of

starting the power tool accidentally.

▪Store idle power tools out of the reach of children and do not allow persons unfamiliar with

the power tool or these instructions to operate the power tool. Power tools are dangerous

in the hands of untrained users.

▪Maintain power tools. Check for misalignment or sticking of moving parts, breakage of

parts and any other condition that may affect the power tool’s operation. If damaged, have

the power tool repaired before use. Many accidents are caused by poorly maintained

power tools.

▪Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting

edges are less likely to stick and are easier to control.

▪Use the power tool, accessories and tool bits etc., in accordance with these instructions

and in the manner intended for the particular type of power tool, taking into account the

working conditions and the work to be performed. Use of the power tool for operations

different from intended could lead to a hazardous situation.

5.5 Service

▪Have your power tool serviced by a qualified repair person using only identical

replacement parts. This will ensure that the safety of the power tool is maintained.

6 ADDITIONAL SAFETY INSTRUCTIONS

▪Know your inflator. Read operator’s manual carefully.

▪Learn its applications and limitations, as well as the specific potential hazards related to

this tool. Following this rule will reduce the risk of electric shock, fire, or serious injury.

▪Risk of bursting. Do not operate inflator to result in output pressure greater than marked

maximum pressure of item to be inflated. Do not use at pressure greater than 8 Bar.

▪To reduce the risk of electric shock, do not expose to rain. Store indoors.

▪Inspect unit for cracks, pin holes, or other imperfections that could cause inflator to

become unsafe.

POWDP7020 EN

▪Never cut or drill holes in the inflator.

▪Make sure the hose is free of obstructions or snags.

▪Entangled or snarled hoses can cause loss of balance or footing and may become

damaged.

▪Use the inflator only for its intended use. Do not alter or modify the unit from the original

design or function.

▪Always be aware that misuse and improper handling of this inflator can cause injury to

yourself and others.

▪Never leave an inflator unattended with the air hose attached to the item being inflated.

▪Do not continue to use a inflator or hose that leaks air or does not function properly.

▪Always disconnect the air supply and power supply before making adjustments, servicing

an inflator, or when an inflator is not in use.

▪Do not attempt to pull or carry the inflator by the hoses.

▪Always follow all safety rules recommended by the manufacturer of your inflator, in

addition to all safety rules for the inflator. Following this rule will reduce the risk of serious

personal injury.

▪Household use only.

▪Do not use inflator as a breathing device.

▪Never direct a jet of compressed air toward people or animals. Take care not to blow dust

and dirt towards yourself or others. Following this rule will reduce the risk of serious injury.

▪Protect your lungs. Wear a face or dust mask if the operation is dusty. Following this rule

will reduce the risk of serious personal injury.

▪Do not use this inflator to spray chemicals. Your lungs can be damaged by inhaling toxic

fumes.

▪Check damaged parts. Before further use of the inflator or air tool, a guard or other part

that is damaged should be carefully checked to determine that it will operate properly and

perform its intended function.

▪Check for alignment of moving parts, binding of moving parts, breakage of parts,

mounting, and any other conditions that may affect its operation. A guard or other part that

is damaged should be properly repaired or replaced by an authorized service center.

Following this rule will reduce the risk of shock, fire, or serious injury.

▪Inspect tool cords periodically and, if damaged, have repaired at your nearest Authorized

Service Center.

▪Constantly stay aware of cord location. Following this rule will reduce the risk of electric

shock or fire.

▪Risk of bursting. Carefully monitor objects during inflation.

▪To reduce the risk of over inflation, use a reliable pressure gauge periodically during

inflation. The pressure guage on the inflator is for reference only and is therefore not

binding for exact values.

▪Never leave the inflator unattended during inflation.

▪Allow pump to cool for five (5) minutes after each five (5) minutes of continuous use.

Never block the inflating or deflating outlets while operating.

▪Save these instructions. Refer to them frequently and use them to instruct others who may

use this inflator.

▪If you loan someone this inflator, loan them these instructions also.

7 OPERATION

7.1 Charging the battery

Connect the charger to the power outlet socket

▪Solid green: ready to charge

▪Flickering red: charging

▪Solid green: charged

POWDP7020 EN

▪Solid green and red: battery or charger damaged

Note:If the battery does not fit properly, disconnect it and confirm that the

battery pack is the correct model for this charger as shown on the

specification chart. Do not charge any other battery pack or any battery

pack that does not securely fit the charger.

▪Frequently monitor the charger and battery pack while connected

▪Unplug the charger and disconnect it from the battery pack when finished.

▪Allow the battery pack to cool completely before using it.

▪Store the charger and battery pack indoors, out of reach of children.

NOTE: If battery is hot after continuous use in the tool, allow it to cool down

to room temperature before charging. This will extend the life of your

batteries.

NOTE: Remove battery pack from charger stand which use your thumb or

fingers, press the battery’s release button in and pull the battery pack off at

the same time.

7.2 Battery capacity indicator

There are battery capacity indicators on the battery pack, you can check the capacity status of

the battery if you squeeze the button. Before using the machine, please press switch trigger to

check if the battery is full enough for properly working.

Those 3 LED might show the status of the capacity level of the battery:

3 LED’s are litt: Battery fully charged

2 LED’s are litt: Battery 60% charged

1 LED is litt: Battery almost discharged

7.3 Inserting and removing the battery

7.3.1 To install:

▪Place the battery pack in the tool. Align the rib on the battery pack with groove in the

battery port.

▪Make sure the latches on the battery pack snap in place and that the battery pack is

secured in the tool before beginning operation.

7.3.2 To remove:

▪Depress the latches in the front of the battery pack to release the battery pack and remove

it from the tool.

7.4 LED working light

When working, the LED light on the base of the tool is on,

which is good for nightwork.

7.5 Accessories

The supplied accessories perform a variety of functions.

The tapered adaptor can be used on smaller pinch valves to inflate small items like children’s

toys, which usually require the user to inflate them by blowing air into them.

The sport ball needle can be used to inflate any type of sports ball or any other item that

requires an inflation sport ball needle.

POWDP7020 EN

NOTE: When inflating items of 10 PSI or less, inflate in short bursts and

check after each burst by feel or with a calibrated measuring device to

determine accurate pressure.

7.5.1 Sport ball needle:

▪Insert sport ball needle into sports ball valve and inflate.

▪Remove sport ball needle after inflation.

NOTE: Pressure required for most sports balls is too low for accurate

reading on tool gauge.

7.5.2 Valve adaptor

Before inflating a tire with a valve, loosen the locking nut on the valve stem to inflate. Once

inflation is complete, tighten the locking nut to seal the tire valve.

▪Loosen the valve locking nut.

▪Thread the valve adaptor onto the valve stem with the larger open end toward the wheel.

▪Position the air chuck clamp in the unlock position.

▪Clamp the end of the air chuck down onto the valve adaptor by pressing air chuck clamp

down until it locks into place.

▪After inflation, remove air chuck and tighten locking nut.

8 USING THE INFLATOR

NOTE: Improperly attached hoses or accessories can become detached under

pressure and cause serious injury. Possible air leaks can cause faulty pressure

readings. Make sure all connections are tightly secured.

▪Install the battery pack.

▪Position air chuck clamp in the unlock position perpendicular to the air hose.

▪Place the air chuck on the valve stem.

▪Push the air chuck down so that the threaded section of the valve stem is inside the air

chuck.

▪Clamp the end of the air chuck down onto the valve stem by pressing air chuck clamp

down until it stops or is parallel with the air hose.

▪Press “ON/Unit” button to read the current tire pressure on the gauge. Press “ON/Unit”

button again to select tire pressure measurement unit from PSI, KPA, BAR, KG/CM.

▪Press “+” or “-” button to adjust preset tire pressure.

1. Long press “+” or “-” button to adjust working pressure quickly.

2. Short press “+” or “-” button to adjust preset working pressure by 0.05BAR & KG/

CM, 1 PSI, 5KPA.

▪Press on/off switch to start inflating. When it reaches the preset pressure value, the device

will stop working.

NOTE: To reset the tire pressure measurement unit, press "ON/Unit" to reselect

after setting preset pressure value.

NOTE: Digital gauge records the preset measurement unit and value of last time

operation

NOTE: After the air pump reaches the preset pressure value, the digital gauge will

go off after 60 seconds, and the device will shut down automatically.

POWDP7020 EN

NOTE: After the battery runs out, the low power indication on the digital display

will flash 10 times, afterwards the digital display will shut down immediately.

NOTE: Always re-push the on/off switch after switching battery packs, otherwise

the machine will not re-start.

9 CLEANING AND MAINTENANCE

9.1 Cleaning

▪Keep the ventilation slots of the machine clean to prevent overheating of the engine.

▪Regularly clean the machine housing with a soft cloth, preferably after each use.

▪Keep the ventilation slots free from dust and dirt.

▪If the dirt does not come off use a soft cloth moistened with soapy water.

Never use solvents such as petrol, alcohol, ammonia water, etc. These

solvents may damage the plastic parts.

9.2 Maintenance

Our machines have been designed to operate over a long period of time with a minimum of

maintenance. Continuous satisfactory operation depends upon proper machine care and

regular cleaning.

10 TECHNICAL DATA

POWDP7020

Rated voltage DC

20 V

Max. Pressure

8 bar

Weight (without battery )

0.85 kg

Air hose length

50 cm

Led work light

Yes

Soft grip

Yes

Automatic stop

Yes

11 NOISE

Noise emission values measured according to relevant standard. (K=3)

Acoustic pressure level LpA

76 dB(A)

Acoustic power level LwA

90 dB(A)

ATTENTION! Wear hearing protection when sound pressure is over 85

dB(A).

aw (Vibration):

2,3 m/s²

K = 1.5 m/s²

12 STORAGE

▪Thoroughly clean the whole machine and its accessories.

▪Store it out of the reach of children, in a stable and secure position, in a cool and dry

place, avoid too high and too low temperatures.

▪Protect it from exposure to direct sunlight. Keep it in the dark, if possible.

▪Don’t keep it in plastic bags to avoid humidity build-up.

POWDP7020 EN

13 WARRANTY

▪This product is warranted as provided by law for a 36 -month period effective from the

date of purchase by the first user.

▪This warranty covers all material or production flaws excluding: batteries, chargers,

defective parts subject to normal wear & tear such as bearings, brushes, cables, and

plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects

resulting from maltreatment, accidents or alterations; nor the cost of transportation.

▪Damage and/or defects resulting from inappropriate use also do not fall under the

warranty provisions.

▪We also disclaim all liability for any bodily injury resulting from inappropriate use of the

tool.

▪Repairs may only be carried out by an authorised customer service centre for Powerplus

tools.

▪You can always obtain more information at the number 00 32 3 292 92 90.

▪Any transportation costs shall always be borne by the customer, unless agreed otherwise

in writing.

▪At the same time, no claim can be made on the warranty if the damage of the device is the

result of negligent maintenance or overload.

▪Definitely excluded from the warranty is damage resulting from fluid permeation, excessive

dust penetration, intentional damage (on purpose or by gross carelessness), inappropriate

usage (use for purposes for which the device is not suitable), incompetent usage (e.g. not

following the instructions given in the manual), inexpert assembly, lightning strike,

erroneus net voltage. This list is not exhaustive.

▪Acceptance of claims under warranty can never lead to the prolongation of the warranty

period nor commencement of a new warranty period in case of a device replacement.

▪Devices or parts which are replaced under the warranty therefore remain the property of

Varo NV.

▪We reserve the right to reject a claim whenever the purchase cannot be verified or when it

is clear that the product has not been properly maintained. (Clean ventilation slots, carbon

brushes serviced regularly, etc.).

▪Your purchase receipt must be kept as proof of date of purchase.

▪Your appliance must be returned undismantled to your dealer in an acceptably clean state,

(in its original blow-moulded case if applicable to the unit), accompanied by proof of

purchase.

14 ENVIRONMENT

Should your appliance need replacement after extended use, do not discard it

with the household rubbish but dispose of it in an environmentally safe way.

Waste produced by electrical machine items should not be handled like normal

household rubbish. Please recycle where recycle facilities exist. Check with your

Local Authority or retailer for recycling advice.

This product contains Li-ion. To preserve natural resources, please recycle or

dispose of batteries properly. Local, state or federal laws may prohibit disposal of

Li-ion batteries in ordinary trash. Consult your local waste authority for information

regarding available recycling and/or disposal options.

Inhaltsverzeichnis

Andere Powerplus Wasserpumpe Handbücher

Powerplus

Powerplus POWX1710 Bedienungsanleitung

Beliebte Wasserpumpe Handbücher anderer Marken

Neptun

Neptun NPHW 5500 Bedienungsanleitung

Sensidyne

Sensidyne Gilian BDX-II Montage- und Bedienungsanleitung

Draper

Draper 47808 Bedienungsanleitung

Trolla

Trolla 12820 Bedienungsanleitung

Sunfab

Sunfab SVH Series Bedienungsanleitung

WilTec

WilTec 50740 Bedienungsanleitung

Fieldmann

Fieldmann FVC 5015 EK Bedienungsanleitung

Everbilt

Everbilt EFSUB5-122HD Bedienungsanleitung

Graco

Graco Husky 3300e Bedienungsanleitung

esotec

esotec 101018 Bedienungsanleitung

moyno

moyno 2000 CC Bedienungsanleitung

Becker

Becker BASIC VASF 2.80/1-0.AC230 Bedienungsanleitung

Sykes AmeriPumps

Sykes AmeriPumps GP100M Fehlerbehebungshandbuch

DUROMAX

DUROMAX XP WX Series Bedienungsanleitung

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Bedienungsanleitung

Franklin Electric

Franklin Electric IPS Bedienungsanleitung

Xylem

Xylem e-1532 Series Bedienungsanleitung

Milton Roy

Milton Roy PRIMEROYAL Bedienungsanleitung