from the adapter must be connected to a permanent ground such as a properly grounded outlet
box.
PERSONAL SAFETY
•Dress appropriately. Do not wear loose clothing or jewelry. Keep long hair in place and
contained. Keep clothing, hair and gloves away from moving parts. Loose clothing, jewelry
and hair can be snagged in moving parts.
•Use common sense, stay alert and watch what you are doing while operating a power tool.
Do not use tools while under the influence of alcohol, medication, or drugs. Keep focused on
the work at hand while using a power tool to prevent personal injury.
•Make sure the power switch is in the “OFF” position before plugging it into the receptacle.
This will prevent accidental starting. Carrying tools with your finger on the switch or
plugging in the tools with the switch in the “ON” position invites accidents.
•Remove adjusting tools such as wrenches or keys before turning the tool on. A wrench or key
left attached to a rotating part will fly off and may cause personal injury.
•Do not overreach while operating a power tool. Keep proper footing and balance at all times.
Good balance and solid footing enables better control in unexpected situations.
•Always wear appropriate safety equipment. Always wear eye protection while operating a
power tool. Use appropriate dust respirators, hearing protection, hard-hat, face shield or
safety shoes as dictated by the work and tool.
TOOL USE AND CARE
•Secure the work piece with clamps or other practical methods to provide a secure work
platform. Holding the work by hand or against your body is not secure and may lead to loss
of control.
•Use the correct tool for the work. The proper tool will do the work faster and safer.
•Do not use the tool if the “ON/OFF” switch is not working. Operating a tool that cannot be
controlled by you is dangerous and must be repaired before use.
•Always disconnect the power cord from the electrical outlet before storing the tool, making
adjustments or adding/replacing accessories. This simple prevention will reduce the risk of
accidental starting the tool.
•Store the tool in a secure place out of reach of children. A secure storage location will
prevent the unauthorized use by untrained users.
•Properly maintain tools. Keep all cutting tools sharp and clean. Remove contaminants from
the tool and keep clean. Check for broken parts or binding of moving parts before use. If
damaged, have the tool serviced before use. Prevent accidents caused by poorly maintained
tools.
•Use only accessories recommended for your model. Accessories suitable for one tool may
become hazardous when used on another tool.
SERVICE
•Tool service, mechanical and/or electrical is to be performed only by qualified repair
personnel. Service performed by unqualified personnel may result in a risk of injury.
•When servicing a tool, use only identical replacement parts. Use of unauthorized parts or
failure to follow maintenance instructions may create a risk of electrical shock or injury.
NOTE: if any parts are damaged or missing, do not attempt to plug in the power cord and turn
the switch on until the damaged or missing parts are obtained and are installed correctly.
6
