PowerPro Technology 22050 Bedienungsanleitung
AIR COMPRESSOR IDENTIFICATION
For information and questions contact customer service at 1-800-232-1195. Please fill out the
information below and have it accessible prior to calling. For the Serial Number refer to the
specifications sticker on your Air Compressor.
DATE OF PURCHASE: _______________________________________________________
PURCHASED FROM: ________________________________________________________
ITEM #: _______________________________________________________________
SERIAL NUMBER: _________________________________________________________
2
TABLE OF CONTENTS
Specifications ………………………………………………………………………….. 3
Important Safety Instructions...………………………………………………………… 4
General Safety Instructions…………………………………………………………….. 4-6
Air Compressor Safety Information …………………………………………………... 6-7
Electrical Instructions………………………………………………………………….. 7-9
Components……………………………………………………………………………. 10
Assembly Instructions…………………………………………………………………. 11
Operation……………………………………………………………………………… 12-13
Maintenance……………………………………………………………………………. 13-15
Troubleshooting………………………………………………………………………… 15
Service………………………………………………………………………………….. 16
Exploded View…………………………………………………………………………. 17
Parts List………………………………………………………………………………... 18
Warranty………………………………………………………………………………… 19
SPECIFICATIONS
5 Gallon pancake Style Air Compressor
Item #: 22050
Motor: 120V, 60Hz, 13 Amps
Pressure Range: 85–125 psi
Air Flow: 4.2 CFM @ 40 psi
3.2 CFM @ 90 psi
Air Outlet Size: 1/4" NPT
Tank Capacity: 5 Gallons
Weight: 48 lbs.
3
IMPORTANT SAFETY INSTRUCTIONS
1. The purpose of safety symbols is to attract your attention to possible dangers. The safety
symbols, and the explanations with them, deserve your careful attention and understanding.
The safety warnings do not by themselves eliminate any danger. The instructions or warnings
they give are not substitutes for proper accident prevention measures.
WARNING: This is the safety alert symbol. It is used to alert you to potential personal
injury hazards. Obey all safety messages that follow this symbol to avoid possible
injury or death.
Note: Advises you of information or instructions vital to the operation or maintenance of the
equipment.
2. Servicing requires extreme care and knowledge and should be performed only by a qualified
service technician. For service we suggest you return the tool/equipment to Power Pro for
repair. When servicing, use only identical Power Pro replacement parts.
3. READ ALL INSTRUCTIONS BEFORE USING YOUR AIR COMPRESSOR.
4. Failure to follow all instructions listed below may result in electrical shock, fire and/or
serious personal injury.
WARNING: Do not attempt to operate this tool/equipment until you have read
thoroughly and understand completely all instructions, safety rules, contained in this
manual. Failure to comply can result in accidents involving fire, electric shock, or
serious personal injury. Save this Operator's Manual and review frequently for continuing safe
operation and instructing others who may use this tool/equipment.
5. Safe operation of this tool/equipment requires that you read and understand this Operator's
Manual and all labels affixed to the tool/equipment. Safety is a combination of common
sense, staying alert and knowing how your tool/equipment works.
GENERAL SAFETY INSTRUCTIONS
WARNING: Read all safety warnings and instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE.
4
Work Area Safety
1. Keep work area clean and well lit. Cluttered or dark areas invite accidents.
2. Do not operate your Air Compressor in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Air Compressor motors produce sparks which may ignite
the dust or fumes.
3. Keep children and bystanders away from an operating Air Compressor.
Electrical Safety
1. Air Compressor plugs must match the outlet. Never modify the plug in any way. Do not use
any adapter plugs with grounded Air Compressors. Standard plugs and matching outlets will
reduce the risk of electric shock.
2. Do not expose your Air Compressor to rain or wet conditions. Water entering your Air
Compressor will increase the risk of electric shock.
3. Do not abuse the cord. Never use the cord for unplugging your Air Compressor. Keep the
cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase
the risk of electric shock.
Personal Safety
1. Stay alert, watch what you are doing and use common sense when operating your Air
Compressor. Do not use your Air Compressor while you are tired or under the influence of
drugs, alcohol or medication. A moment of inattentiveness while operating your Air
Compressor may result in serious personal injury.
2. Use protective safety equipment. Always wear ANSI-approved eye protection during setup
and use.
3. Prevent unintentional starting. Ensure the switch is in the OFF position before connecting to
power source or moving your Air Compressor.
Air Compressor Use and Care
1. Do not use your Air Compressor if the switch does not turn ON and OFF. An Air
Compressor that cannot be controlled with the switch is dangerous and must be repaired.
2. Disconnect the plug from the power source before making any adjustments, changing
accessories, or storing your Air Compressor. This preventive safety measure reduces the risk
of starting your Air Compressor accidentally.
3. Store your Air Compressor out of the reach of children and do not allow people unfamiliar
with your Air Compressor or these instructions to operate it. An Air Compressor is
dangerous in the hands of untrained users.
5
4. Maintain your Air Compressor. Keep your Air Compressor clean for maximum performance.
Follow the instructions for lubricating and changing accessories. Keep your Air Compressor
dry, clean and free from oil and grease. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect your Air Compressor's operation. If
damaged, have your Air Compressor repaired professionally before use. Many accidents are
caused by a poorly maintained Air Compressor.
5. Use your Air Compressor in accordance with these instructions, taking into account the
working conditions and the work to be performed. Use of your Air Compressor for
operations different from those intended could result in a hazardous situation.
Service
Have your Air Compressor serviced by a qualified professional repair person using only identical
replacement parts. This will ensure that the safety of your Air Compressor is maintained.
AIR COMPRESSOR SAFETY INFORMATION
1. RISK OF FIRE OR EXPLOSION – Do not spray flammable liquid in a confined area or
towards a hot surface. The spray area must be well-ventilated. Do not smoke while spraying
or spray where spark or flame is present.
2. ARCING PARTS – Keep your Air Compressor at least 20 feet away from explosive vapors,
such as when spraying with a spray gun.
3. RISK OF BURSTING – Do not adjust regulator higher than marked maximum pressure of
attached pneumatic tool/equipment.
4. RISK OF INJURY – Do not direct air stream at people or animals.
5. Do not use to supply breathing air.
6. Do not leave your Air Compressor unattended for an extended period while plugged in.
Unplug your Air Compressor after use.
7. Keep your Air Compressor well-ventilated and do not cover during use.
8. Drain tank daily or after use. Internal rust causes tank failure and explosion.
9. Your Air Compressor's cylinder head and air lines get hot during operation. Do not touch or
allow children nearby during or immediately following operation.
10. Do not use the air hose to move your Air Compressor.
11. Release the pressure in the storage tank before moving.
12. The use of accessories or attachments not recommended by the manufacturer may result in
bodily injury.
13. All air line components, including hoses, pipe, connectors, and filters must be rated for a
minimum working pressure of 150% of the maximum system pressure.
14. Industrial applications must follow OSHA guidelines.
6
15. This product is not a toy. Keep it out of reach from children.
16. People with pacemakers should consult their physician(s) before use. Electromagnetic fields
in close proximity to heart pacemaker could cause pacemaker interference or pacemaker
failure.
WARNING: The brass components of this product contain lead, a chemical known t
the State of California to cause birth defects (or other reproductive harm). (Ca
Health & Safety code 25249.5, et seq.)
o
lifornia
17. The warnings, precautions, and instructions discussed in this Operator's Manual cannot cover
all possible conditions and situations that may occur. It must be understood by the operator
that common sense and caution are factors which cannot be built into this product, but must
be supplied by the operator.
ELECTRIC INSTRUCTIONS
Grounding Instructions
1. IN THE EVENT OF A MALFUNCTION OR BREAKDOWN, grounding provides the path
of least resistance for electric current and reduces the risk of electric shock. This
tool/equipment is equipped with an electric cord that has an equipment grounding conductor
and a grounding plug. The plug MUST be plugged into a matching outlet that is properly
installed and grounded in accordance with ALL local codes and ordinances.
2. DO NOT MODIFY THE PLUG PROVIDED. If it will not fit the outlet, have the proper
outlet installed by an electrician.
3. IMPROPER CONNECTION of the equipment grounding conductor can result in electric
shock. The conductor with the green insulation (with or without yellow stripes) is the
equipment grounding conductor. If repair or replacement of the electric cord or plug is
necessary, DO NOT connect the equipment grounding conductor to a live terminal. CHECK
with a licensed electrician or service personnel if you do not completely understand the
grounding instructions, or if you are not sure if the tool/equipment is properly grounded.
4. USE ONLY THREE WIRE EXTENSION CORDS with have 3-prong plugs and 3-prong
outlets that accept the tool/equipment’s plug. Repair or replace damaged or worn cords
immediately.
5. CAUTION: In all cases, make certain the outlet is properly grounded. If you are not sure if it
is, have a licensed electrician check the outlet.
7
WARNING: This tool/equipment is for indoor use only. Do not expose to rain or use
in damp locations.
Fig. 1
1. Tools/equipment with three wire grounding plugs (Fig. 1, A) are intended for use on a circuit
that has an outlet that looks like the one illustrated (Fig. 1, B).
2. A temporary adapter (Fig. 1, B & C) may be used to connect this plug to a 2-pole receptacle
(Fig. 1, B) if a properly grounded outlet is not available.
3. The temporary adapter should be used only until a properly grounded outlet can be installed
by a qualified electrician.
4. The green colored rigid ear, lug, etc. extending from the adapter must be connected to a
permanent ground such as a properly grounded outlet box (Fig. 1, D).
8
Extension Cord Guidelines
Make sure your extension cord is in good condition. When using an extension cord, be sure to
use one heavy enough to carry the current your product will draw. An undersized cord will cause
a drop in line voltage resulting in loss of power and overheating. The table below shows the
correct size to be used according to cord length and nameplate ampere rating. If in doubt, use the
next heavier gauge. The smaller the gauge number, the heavier the cord.
Minimum Gauge for Extension Cords (AWG)
(When using 120 V only)
Ampere Rating Total Length of Cord in feet
More Than Not More
Than 25 50 100 150
0 6 18 16 16 14
6 10 18 16 14 12
10 12 16 16 14 12
12 16 14 12 Not Recommended
1. Be sure your extension cord is properly wired and in good condition. Always replace a
damaged extension cord or have it repaired by a qualified person before using it.
2. Protect your extension cords from sharp objects, excessive heat and damp or wet areas.
3. Use a separate electrical circuit for your tools/equipment. This circuit must not be less than a
#12 wire and should be protected with a 20 Amp time-delayed fuse.
4. Before connecting the motor to the power line, make sure the switch is in the OFF position
and the electric current is rated the same as the current stamped on the motor nameplate.
Running at a lower voltage will damage the motor.
9
COMPONENTS
1
2
3
4
5
6
7
8
9
1 – Carrying Handle 2 – Air Filter
3 – ON/OFF Switch 4 – Regulator
5 – Air Flow Valve 6 – Air Regulator Gauge
7 – Tank Pressure Gauge 8 – Drain Valve
9 – Rubber Foot
10
Inhaltsverzeichnis
Andere PowerPro Technology Luftkompressor Handbücher
