Powersoft QTU1400 Bedienungsanleitung

QTU1400

User Manual

COD: MAN-QTU-USER_MAN_-___10-EN-10

Sept 2002

2/8

Powersoft s.r.l. -P. IVA n. 04644200489 –Via E.Conti, 5 Scandicci -Tel.: (+39) -55 -7350230-Fax: 7356235

Caution

QTU1400

CAUTION: To reduce the risk of electric shock, do not remove the cover. No user-serviceable

parts inside. Refer servicing to qualified service personnel.

WARNING: To prevent fire or electric shock, do not expose this equipment to rain or moisture.

SAFEGUARDS: Electrical energy can perform many useful functions. This unit has been

engineered and manufactured to assure your personal safety. Improper use can result in

potential electrical shock or fire hazards. In order not to defeat the safeguards, observe the

following instructions for its installation, use and servicing.

NOTES: This equipment has been tested and found to comply by Competent Body (Directive

89/336/EEC-EMC) pursuant to the product family standard for audio professional use:

EN 55103-1 and EN 55103-2 standard (with the limits for E1 and E2 electromagnetic environment);

EN61000–3 –2 , EN 61000 –3 -3

This is a Class A product. In a domestic environment this product my cause radio interferences in

which case the user may be required to take adequate measures.

This equipment has been tested and found to comply by Notified Body (Directive 73/23/EEC L.V)

pursuant to the audio apparatus safety requirements: Standard EN 60065.

Warning Notices

Location

Install the amplifier where it will not be directly exposed to high temperature or humidity.o not install the

amplifier in a location that is exposed to direct rays of the sun, or near to hot appliances or radiators. Excessive

heat can adversely affect the operation and internal components. Installation of the product in a damp or dusty

environment may result in malfunction or accident.

Precautions regarding installation

Placing and using the amplifier for long periods on heat-generation sources will affect performances. Avoid

placing the amplifier on heat-generating sources. Install this amplifier as far as possible from tuners and TV

sets. An amplifier installed in close proximity to such equipment may cause noise or degradation of the picture.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

3/8

Powersoft s.r.l. -P. IVA n. 04644200489 –Via E.Conti, 5 Scandicci -Tel.: (+39) -55 -7350230-Fax: 7356235

Safety rules

QTU1400

This device must be powered exclusively by earth connected mains sockets in electrical networks compliant to

the IEC 364 or similar rules.

Is absolutely necessary to verify this fundamental requirement of safety and, in case of doubt, require an

accurate check by a qualified personal.

The constructor cannot be considered responsible for eventual damages caused to persons, things or data for

the missing of accurate earth link.

Before powering this device verify that the correct voltage rating.

Verify that your mains connection is capable to satisfy the power ratings of the device.

Be sure that connection socket or circuit breaker is accessible to the operator for servicing

Be sure that sufficient air cooling in provided inside the rack mounting unit

Do not spill water or other liquids into or on the unit.

Do not use this unit if the electrical power cord is frayed or broken.

Do not remove the cover. Removing the cover will expose you to potentially dangerous voltage.

No naked flame sources such like lighted candles should be placed on the product.

Contact the authorized center for ordinary and extraordinary maintenance.

Input mains and output power connection wirings must not to be accessible to the user.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

4/8

Powersoft s.r.l. -P. IVA n. 04644200489 –Via E.Conti, 5 Scandicci -Tel.: (+39) -55 -7350230-Fax: 7356235

Specifications

QTU1400

GENERAL

Type .…………....… 4 channels digital amplifier for PA professional applications with insulated output

POWER REQUIREMENTS

All models..………...........................................……..… AC 95V ÷265V, 50/60 Hz / 450V A

Weight ........................................................................ 29 Kg

External dimensions ……………………………………..485mm(W),480mm(D),88.4mm(H)

Enviromental temperature……………………………… 40°C

Overall efficiency…………………………………………better than 75%

AUDIO SECTION

Slew Rate (100V output / 28.5 Ω Load) ............…... 30V/µS

S/N ratio ………………………………...............….… >105 dB/A

Distortion………………………….....................…..... <0.1% (THD, DIM, SMPTE)

Inputs ..............……………………………...........…..... Balanced to ground, three poles in line

Impedance ...………………………………...........….... 10 K

Gain …….................………………………………........ 34, 37, 40 dB (50, 70, 100Voutput)

Output .....................…………………………….....…... Floating insulated

Bandwidth (100V output / 28.5 Ω Load) …..……….… 50 Hz -20 KHz / 0 –3dB

POWER SPECIFICATIONS

Power continuous all channels driven (1KHz, 0.5% THD)

100V out / 28.5 Ω Load = 350 W minimum load range > 28.5 Ω

70V out / 14.0 Ω Load = 350 W minimum load range > 14.0 Ω

50V out / 7.14 Ω Load = 350 W minimum load range > 7.14 Ω

FUNCTIONS

•Thermal protection (over-temperature power limiting, thermal shutdown)

•Auto reset short-circuit / overload output protection

•Soft Clip limiter and High frequency gain control

•Temperature controlled fan

•Input output monitoring by inner loudspeaker or external headpones

•Switchable auxiliary inputs by 24 Vdc external command

•Remote controlling and diagnosys option board

5/8

Powersoft s.r.l. -P. IVA n. 04644200489 –Via E.Conti, 5 Scandicci -Tel.: (+39) -55 -7350230-Fax: 7356235

Connection description

QTU1400

2712

6/8

Powersoft s.r.l. -P. IVA n. 04644200489 –Via E.Conti, 5 Scandicci -Tel.: (+39) -55 -7350230-Fax: 7356235

Front/Rear panel description

QTU1400

FRONT PANEL:

1) Removable dust cover

2) Mains switch

3) Channel gain control knob

4) Channel output level indicator,

Ready status channel 1 / 2 (3 / 4)

Temperature status channel 1 / 2 (3 / 4)

Input signal presence

Output stage protection indicator

Input signal monitor selection indicator

Output signal monitor selection indicator

5) Monitor gain control knob

6) Monitor selection pushbutton

7) Exclusive headphone 6.3mm jack

BACK PANEL:

8) Mains IEC socket

9) Data port connector (optional)

10) ID selection encoders (optional)

11) Auxiliary input selection command (24Vdc coil relays) conn1

12) Auxiliary balanced input (In+, Gnd , In-) conn2

13) Output power connector (100V, 70V, 50V, 0 ) conn3

14) Line balanced input (In-, Gnd , In+) conn2

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CHECK PROPER EARTH CONNECTION BEFORE OPERATE

THIS DEVICE IS DESIGNED TO WORK WITH EARTH CONNECTION

7/8

Powersoft s.r.l. -P. IVA n. 04644200489 –Via E.Conti, 5 Scandicci -Tel.: (+39) -55 -7350230-Fax: 7356235

Mating connectors

QTU1400

Conn1 (2POLES 5.08mm): Phoenix Contact MSTB 2,5/2-ST-5,08 (Cod. Ph.C. 1757019)

(Cod.Powersoft CN000149)

Conn2 (3POLES 5.08mm): Phoenix Contact MSTB 2,5/3-ST-5,08 (Cod. Ph.C. 1757022)

(Cod.Powersoft N000150)

Conn3 (4POLES 5.08mm): Phoenix Contact MSTB 2,5/4-ST-5,08 (Cod. Ph.C. 1757035)

(Cod.Powersoft CN000151)

Servicing

QTU1400

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This device must be correctly cooled for correct and reliable operation:

Clean front panel dust filter every 2000 Hours of operation.

Remove the N°3 exegonal screws on front grille and clean the filter with compressed air.

8/8

Powersoft s.r.l. -P. IVA n. 04644200489 –Via E.Conti, 5 Scandicci -Tel.: (+39) -55 -7350230-Fax: 7356235

Dimensions

QTU1400

Inhaltsverzeichnis

Andere powersoft Verstärker Handbücher

powersoft

powersoft Duecanali 804 Bedienungsanleitung

powersoft

powersoft X Series Bedienungsanleitung

powersoft

powersoft K Series Bedienungsanleitung

powersoft

powersoft M30D Bedienungsanleitung

powersoft

powersoft Digam K20 Bedienungsanleitung

powersoft

powersoft T Series Bedienungsanleitung

powersoft

powersoft DIGAM K series Bedienungsanleitung

powersoft

powersoft X8 Bedienungsanleitung

powersoft

powersoft M-Drive Bedienungsanleitung

powersoft

powersoft Digam Q Series Bedienungsanleitung

powersoft

powersoft Ottocanali Series Bedienungsanleitung

powersoft

powersoft DigiMod 3004PFC2 Bedienungsanleitung

powersoft

powersoft M Series Bedienungsanleitung

powersoft

powersoft D-Cell 504 Bedienungsanleitung

powersoft

powersoft LiteMod 4HV Bedienungsanleitung

powersoft

powersoft DigiMod 3004PFC4 Bedienungsanleitung

powersoft

powersoft S Series Bedienungsanleitung

powersoft

powersoft K2 DSP+AESOP Bedienungsanleitung

powersoft

powersoft M Series Bedienungsanleitung

powersoft

powersoft X8 Service-Handbuch

powersoft

powersoft Ottocanali I204 DSP+ETH Bedienungsanleitung

powersoft

powersoft K2 DSP+AESOP Bedienungsanleitung

powersoft

powersoft Digimod Series Bedienungsanleitung

powersoft

powersoft T Series Bedienungsanleitung

Beliebte Verstärker Handbücher anderer Marken

ASTRO

ASTRO HVO V40 P Bedienungsanleitung

Marantz

Marantz SUPERSCOPE BLA-545 Montageanleitung

NAD

NAD CI980 Bedienungsanleitung

Technics

Technics SE-CH770 Bedienungsanleitung

Harman Kardon

Harman Kardon HK6300 Bedienungsanleitung

NAD

NAD T975 Bedienungsanleitung

McIntosh

McIntosh MA6850 Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Bedienungsanleitung

Viatron

Viatron Autrix Bedienungsanleitung

GME

GME GA9800 Bedienungsanleitung

Atlas

Atlas CP700 Bedienungsanleitung

Roland

Roland KC-1000 Bedienungsanleitung

Pyle

Pyle PFMRA350BW Bedienungsanleitung

Advantage

Advantage S-250 Bedienungsanleitung

IRT Electronics

IRT Electronics DVA-3007 Bedienungsanleitung

Dimavery

Dimavery BA-100 Series Bedienungsanleitung

Sony

Sony XM-S400D Bedienungsanleitung

Schertler

Schertler ROY X Bedienungsanleitung

powersoft QTU1400 Bedienungsanleitung

Beliebte Verstärker Handbücher anderer Marken