Powersoft DigiMod IS integration kit Bedienungsanleitung

Tech Note’s

Number

Keep This Technical Note For Future Reference

1 Preliminary consideration

This article is related to the following products:

fDigiMod 1000

fDigiMod 1500

fDigiMod 2000HV

The kit that allows to transform a DigiMod module to DigiMod

IS (integrated solution) is labeled KT000276, and comprehends:

fN°1 Heat Sink

fN° 1 interface (already mounted on Heat Sink)

fN° 1 DSP-C

fN° 1 PowerCon Blue (already mounted on Heat Sink)

fN° 1 PowerCon Grey (already mounted on Heat Sink)

fN° 6 Screws for xing DigiMod module on Heat Sink

fN° 2 Screws for xing DSP-C board on Heat Sink

fN° 1 Bolt for xing ground wire (on PowerCon connection)

to DigiMod module

2 Tools needed

fPhillips cross-wing screwdriver

3 Procedure

1. Fix the DSP-C on DigiMod SIMM board connector with the

two screws.

TECHNICAL NOTE #18 rev. 01

DigiMod IS integration kit

How to transform a DigiMod module to DigiMod IS (integrated solution)

2. Remove all jumpers located on DigiMod on CN18/CN17

FIGURE 1: phillipsscrewdriver.jpg

FIGURE 2: Installing DSP-C

FIGURE 3: Jumpers to be removed, overview

FIGURE 4: Jumpers to be removed, detail

powersoft_TN018_DigiModISKit_en_v1.0

3. Fix the DigiMod module on the heat sink with the six screws.

4. Fix the grounding with a bolt.

5. Connect the PowerCon mains on the DigiMod.

6. Connect the programming at cables from the interface to

the DSP-C on board.

7. The procedure is nished.

FIGURE 6: Fixing the grounding

FIGURE 7: Connecting the powercon

FIGURE 5: Fixing the module on the heat sink

FIGURE 9: Connecting the at cable

FIGURE 8: Jumpers removed

Via Enrico Conti, 5

50018 Scandicci (FI) Italy

Tel: +39 055 735 0230

Fax: +39 055 735 6235

General inquiries: info@powersoft.it

Sales: sales@powersoft.it

Application & technical support: support@powersoft.it

Service & maintenance: service@powersoft.it

www.powersoft-audio.com

Andere powersoft Steuereinheit Handbücher

powersoft

powersoft DigiMod 3004PFC4 Bedienungsanleitung

powersoft

powersoft DigiMod 500 Bedienungsanleitung

powersoft

powersoft IpalMod Bedienungsanleitung

powersoft

powersoft DSP LITE Bedienungsanleitung

powersoft

powersoft DigiMod 3004PFC2 Bedienungsanleitung

powersoft

powersoft MiniMod 4 Bedienungsanleitung

powersoft

powersoft LiteMod 4HC Bedienungsanleitung

powersoft

powersoft LiteMod Bedienungsanleitung

powersoft

powersoft D-Cell504 IS Bedienungsanleitung

powersoft

powersoft IpalMod Bedienungsanleitung

powersoft

powersoft LiteMod Bedienungsanleitung

powersoft

powersoft M-Drive Series Bedienungsanleitung

powersoft

powersoft DigiMod 1000 NPS Sicherheitsleitfaden

powersoft

powersoft DigiMod IS Series Technisches Datenblatt

powersoft

powersoft LiteMod 4HC Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung

powersoft DigiMod IS integration kit Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken