Powerware 9315s Bedienungsanleitung

,167$//$7,21 

23(5$7,21 0$18$/

3DUDOOHO &DSDFLW\

5HGXQGDQW 836

ZLWK 3RZHU+DQGOHU 3OX

6ZLWFKERDUG 6\ WHP

%\SD 0RGXOH 66%0

ZZZSRZHUZDUHFRP

ii Powerware 9315 Parallel Capacity/Redundant System with PHP SSBM

164201373 Rev. A 092402

------------------------------------------------------------------------

----------------------------------

IMPORTANT SAFETY INSTRUCTIONS

Instructions Importantes Concernant La Sécurité

SAVE THESE INSTRUCTIONS

Conserver Ces Instructions

This manual contains important instructions for your Uninterruptible Power

Supply (UPS) system. You should follow these instructions during the

installation and maintenance of the UPS, options, accessories, and batteries.

Cette notice contient des instructions importantes

concernant la sécurité.

This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at

their own expense.

WARNING:

This is a product for restricted sales distribution to informed partners. Installation

restrictions or additional measures may be needed to prevent disturbances.

iii

Powerware 9315 Parallel Capacity/Redundant System with PHP SSBM

164201373 Rev. A 092402

Table of Contents

Introduction i...............................................

Basic System Configurations iii...................................

Using This Manual iv............................................

Conventions Used in This Manual v...............................

Safety Considerations vi.........................................

For More Information vii..........................................

Getting Help viii..................................................

Section I Installation

1Getting Started 1---1..........................................

1.1 Installing the UPS 1---1......................................

1.1.1 Creating an Installation Plan 1---1.............................

1.1.2 Preparing Your Site 1---2.....................................

1.1.3 Environment Considerations 1---2.............................

1.1.4 Preparing for Wiring the Parallel Capacity/Redundant System 1---2

1.1.5 Inspecting and Unpacking Each Cabinet 1---3..................

2Installing the Parallel Capacity/Redundant System 2---1.........

2.1 Preliminary Installation Information 2---1........................

2.2 Installing the Switchboard System Bypass Module 2---2..........

2.3 Installing Optional System Maintenance Bypass (SMB) 2---3......

2.4 Installing the Powerware Static Switch 2---4....................

2.4.1 Installing a Fully Rated Static Switch (4000A) 2---4...............

2.5 Installing SSBM or SMB Circuit Breakers 2---4..................

2.5.1 Installing an SSBM or SMB Circuit Breaker 2---4................

2.5.2 Setting the Power+ Trip Unit 2---5.............................

2.6 Installing UPM Cabinets 2---5.................................

2.7 Installing SSBM Wiring 2---5..................................

2.8 Installing Optional SMB Wiring 2---6...........................

2.9 Preparing for Installing Optional Accessories 2---6...............

2.10 Initial Startup 2---6...........................................

2.11 Completing the Installation Checklist 2---6......................

2.12 Installation Checklist 2---7....................................

3Installing a Remote EPO Control 3---1..........................

4Installing a Remote Monitor Panel 4---1........................

5Installing a Relay Interface Module 5---1.......................

6Installing a Supervisory Contact Module 6---1..................

iv Powerware 9315 Parallel Capacity/Redundant System with PHP SSBM

164201373 Rev. A 092402

Section II Operation

7Understanding Parallel

Capacity/Redundant System Operation 7---1................

7.1 Looking Inside the Parallel Capacity/Redundant System 7---1.....

7.2 Standard Modes of Parallel Operation:

Normal, Battery, and Bypass Modes 7---3......................

7.2.1 Normal Mode 7---4..........................................

7 . 2 . 2 B y p a s s M o d e 7 --- 5..........................................

7.2.3 Battery Mode 7---6..........................................

7.2.4 Load Bank Mode 7---7.......................................

7.3 Optional Modes of Parallel Operation:

Maintenance Bypass and Redundant CBP 7---10.................

7.3.1 Maintenance Bypass Mode (Optional) 7---11.....................

7.3.2 Redundant CBP Mode (Optional) 7---12.........................

8Operational Controls and Features 8---1........................

8.1 General 8---1...............................................

8.2 SSBM Standard Features 8---1................................

8.2.1 Control Panel 8---1..........................................

8.2.2 SSBM Circuit Breakers 8---1..................................

8.2.3 SMB Circuit Breakers 8---6...................................

8.2.4 Fully Rated Static Switch 8---6................................

8 . 2 . 5 E M E R G E N C Y U P M O F F 8 --- 6................................

8.2.6 Customer Interface Panel 8---6................................

8.2.7 Customer Convenience Outlet 8---6...........................

8.2.8 Installation Features 8---6....................................

8.3 Options and Accessories 8---7................................

8.3.1 Remote Monitor Panel 8---7..................................

8.3.2 Relay Interface Module 8---7..................................

8 . 3. 3 M o d em 8 --- 7...............................................

8.4 Safety Considerations 8---8...................................

8.5 Symbols, Controls, and Indicators 8---9........................

Powerware 9315 Parallel Capacity/Redundant System with PHP SSBM

164201373 Rev. A 092402

9U s i n g t h e C o n t r o l P a n e l 9 --- 1..................................

9 . 1 D e s c r i p t i o n 9 --- 1............................................

9.2 Using the LCD Screen 9---2..................................

9.3 Using the Pushbuttons 9---3..................................

9.4 Adjusting the Contrast 9---3..................................

9.5 Reading the Status Indicators 9---4............................

9.6 Using the Menu Options 9---5................................

9.6.1 System Meters Screen 9---5..................................

9.6.2 Load Amp Meters Screen 9---6...............................

9.6.3 Software Versions Screen 9---7...............................

9.6.4 System History Screen 9---8..................................

9.6.5 Active System Events Screen 9---9............................

9.6.6 Unit Statistics Screen 9---10...................................

9.6.7 Mimic Screen 9---11..........................................

9.6.8 Time Setup Screen 9---12.....................................

9.6.9 Port Setup Screen 9---13......................................

10 Operating Instructions for the

Parallel Capacity/Redundant System 10---1..................

10.1 General Information --- Before You Start 10---1...................

10.2 Operation of SSBM with

Powerware 9315---200 thru 9315---500 UPMs 10---1...............

10.2.1 Initial Setup 10---1............................................

10.2.2 Manual Start 10---2...........................................

10.2.3 Auto Start 10---3.............................................

10.2.4 Single UPM Shutdown 10---4..................................

10.2.5 SSBM Shutdown to Bypass 10---4..............................

10.2.6 Restarting a Single UPM 10---5................................

10.2.7 Using the UPM LOAD OFF Pushbutton 10---5....................

10.2.8 To Use the LOAD OFF Pushbutton 10---6........................

10.2.9 Resetting the UPM after LOAD OFF 10---6.......................

10.2.10 Using the SSBM EMERGENCY UPM OFF Pushbutton 10---6....

10.2.11 To Use the SSBM EMERGENCY UPM OFF Pushbutton 10---7...

10.2.12 Resetting the Parallel Capacity/Redundant

System after an EMERGENCY UPM OFF 10---7................

10.3 Operation of SSBM with

Powerware 9315---625 thru 9315---750 UPMs 10---8...............

10.3.1 Initial Setup 10---8............................................

10.3.2 Manual Start 10---9...........................................

10.3.3 Auto Start 10---10.............................................

10.3.4 Single UPM Shutdown 10---10..................................

10.3.5 SSBM Shutdown to Bypass 10---11..............................

10.3.6 Restarting a Single UPM 10---11................................

vi Powerware 9315 Parallel Capacity/Redundant System with PHP SSBM

164201373 Rev. A 092402

Operating Instructions for the Parallel Capacity/Redundant System (cont.)

10.3.7 Using the UPM EMERGENCY UPM OFF Pushbutton 10---12........

10.3.8 To Use the UPM EMERGENCY UPM OFF Pushbutton 10---12.......

10.3.9 Resetting the UPM after an EMERGENCY UPM Shutdown 10---12...

10.3.10 Using the SSBM EMERGENCY UPM OFF Pushbutton 10---13....

10.3.11 To Use the SSBM EMERGENCY UPM OFF Pushbutton 10---13...

10.3.12 Resetting the Parallel Capacity/Redundant System

a f t e r E M E R G E N C Y U P M O F F 1 0 --- 1 4..........................

10.4 Operation of the Optional System Maintenance Bypass (SMB) 10---15

10.4.1 Operation with Electrical Controls 10---15........................

10.4.2 Operation with Electrical Controls with

Redundant CBP Controls 10---16................................

11 Using Features and Options 11---1.............................

1 1 . 1 G e n e r a l 1 1 --- 1...............................................

11.2 Building Alarm Monitoring 11---1...............................

11.3 General Purpose Relay Contacts 11---1.........................

11.4 Remote Monitor Panel 11---2..................................

11.5 Relay Interface Module 11---4..................................

11.6 Supervisory Contact Module 11---5.............................

11.7 Common Battery Racks 11---6.................................

11.8 External Battery Disconnect for Common Battery Racks 11---6.....

12 Responding to System Events 12---1...........................

1 2 . 1 G e n e r a l 1 2 --- 1...............................................

12.2 System Event Horns 12---1....................................

12.3 System Event Lights 12---1....................................

12.4 System Event Messages 12---2................................

vii

Powerware 9315 Parallel Capacity/Redundant System with PHP SSBM

164201373 Rev. A 092402

13 Serial Communications 13---1.................................

1 3 . 1 D e s c r i p t i o n 1 3 --- 1............................................

13.2 Locating the Communications Panel 13---1......................

13.3 Connecting Equipment to a Serial Port 13---1....................

13.4 Configuring the Serial Ports 13---4..............................

13.4.1 Modes 13---5................................................

13.4.2 Rate 13---5..................................................

13.4.3 Data/Stop 13---6.............................................

13.4.4 Handshaking 13---6..........................................

13.4.5 Save 13---6..................................................

13.4.6 Default Settings 13---6........................................

1 3 . 5 Te r m i n a l M o d e 1 3 --- 7.........................................

13.5.1 Printing Selected Information 13---7............................

13.5.2 Entire Log (Ctrl + P) 13---8....................................

13.5.3 Meters Printout (Ctrl + M) 13---9...............................

13.5.4 System Information Printout (Ctrl + A) 13---9....................

13.6 System Configuration 13---10...................................

13.6.1 System Configuration Mode Main Menu 13---10...................

13.6.2 Program Building Alarms 13---10................................

13.6.3 Enable/Disable Default Functions 13---11.........................

13.6.4 Customize Alarm Messages 13---12.............................

13.6.5 Program Unit Name 13---13....................................

13.6.6 Change Password 13---13......................................

13.6.7 Battery Test Setup 13---14......................................

13.6.8 Modify Low Battery Time 13---15................................

1 3 . 7 C a l i b r a t i o n M o d e 1 3 --- 1 5.......................................

13.8 Computer Mode 13---15........................................

13.9 Remote Monitor Mode 13---15..................................

viii Powerware 9315 Parallel Capacity/Redundant System with PHP SSBM

164201373 Rev. A 092402

14 Remote Notification 14---1....................................

1 4 . 1 D e s c r i p t i o n 1 4 --- 1............................................

14.2 Remote Notification Features 14---2............................

14.3 Description of Operation 14---2................................

14.3.1 Call Answer 14---2............................................

14.3.2 Call Out 14---3...............................................

14.3.3 Housekeeping 14---4.........................................

14.4 Hardware Requirements 14---4.................................

14.5 Configuring the Modem 14---5.................................

14.5.1 Basic Modem Configuration 14---5.............................

14.5.2 Configuring the Modem to Call a Remote Computer 14---6........

14.5.3 Configuring the Modem to Call a Numeric Pager 14---7...........

14.5.4 Final Modem Configuration 14---8..............................

14.6 SSBM Setup Configuration 14---9..............................

14.6.1 User Selected Events 14---10...................................

15 Maintaining the Parallel Capacity/Redundant System 15---1.....

1 5 . 1 G e n e r a l 1 5 --- 1...............................................

15.2 Important Safety Instructions 15---1.............................

15.3 Performing Preventive Maintenance 15---3.......................

15.4 Short Circuits 15---4..........................................

15.5 Circuit Breakers 15---4........................................

15.6 Maintenance Training 15---4...................................

16 Product Specifications 16---1..................................

16.1 Model Numbers 16---1........................................

1 6 . 2 S S B M I n p u t 1 6 --- 1...........................................

1 6 . 3 S S B M O u t p u t 1 6 --- 2.........................................

16.4 Environmental Specifications 16---2............................

A p p e n d i x A --- C u s t o m e r I n f o r m a t i o n A --- 1.........................

Powerware 9315 Parallel Capacity/Redundant System with PHP SSBM

164201373 Rev. A 092402

List of Figures

Figure 1. Typical Parallel Capacity/Redundant System with SSBM ii............

Figure 1---1. Cabinets as Shipped, with Outer Packaging and Pallet 1---3..........

F i gu r e 3 --- 1 . R e m o te E PO C o n t r o l 3 --- 1.......................................

F i g u r e 4 --- 1 . R e m o t e M o n i t o r P a n e l ( R M P ) 4 --- 2................................

Figure 4---2. Terminal Block Bracket 4---3......................................

F i g u r e 5 --- 1 . R e l a y I n t e r f a c e M o d u l e 5 --- 1.....................................

Figure 5---2. Terminal Block Bracket 5---2......................................

F i g u r e 6 --- 1 . S u p e r v i s o r y C o n t a c t M o d u l e 6 --- 1.................................

Figure 6---2. Terminal Block Bracket 6---2......................................

F i g u r e 6 --- 3 . S u p e r v i s o r y C o n t a c t M o d u l e T B 2 6 --- 4............................

Figure 7---1. Path of Current Through the Parallel Capacity/Redundant

S y s t e m i n N o r m a l M o d e . 7 --- 4...................................

Figure 7---2. Path of Current Through the Parallel Capacity/Redundant

System in Bypass Mode. 7---5..................................

Figure 7---3. Path of Current Through the Parallel Capacity/Redundant

System in Battery Mode 7---6...................................

Figure 7---4. Path of Current Through the Parallel Capacity/Redundant

System in Load Bank Mode with SSBM with

Temporary Load Bank Tabs. 7---8................................

Figure 7---5. Path of Current Through the Parallel Capacity/Redundant

System in Load Bank Mode with SSBM/SMB with

Temporary Load Bank Tabs. 7---9................................

Figure 7---6. Path of Current Through the Parallel Capacity/Redundant

System in Maintenance Bypass Mode. 7---11......................

Figure 7---7. Path of Current Through the Parallel Capacity/Redundant

System in Redundant CBP Mode. 7---13..........................

Figure 8---1. Typical SSBM Control Section (Sheet 1 of 4) 8---2...................

Figure 8---1. Typical SSBM Control Section (Sheet 2 of 4) 8---3...................

Figure 8---1. Typical SSBM Control Section (Sheet 3 of 4) 8---4...................

Figure 8---1. Typical SSBM Control Section (Sheet 4 of 4) 8---5...................

Figure 9---1. Parallel/Capacity Control Panel 9---1..............................

Figure 9---2. Parts of the LCD Screen

(Typical for Powerware 9315---300 480/480V Unit) 9---2.............

Figure 9---3. System Meters Screen

(Typical for Powerware 9315---300 480/480V Unit) 9---5.............

F i g u r e 9 --- 4 . L o a d A m p s M e t e r s S c r e e n 9 --- 6..................................

F i g u r e 9 --- 5 . Ve r s i o n s S c r e e n 9 --- 7...........................................

F i g u r e 9 --- 6 . E v e n t H i s t o r y L o g S c r e e n 9 --- 8...................................

Figure 9---7. Active System Events Screen 9---9................................

xPowerware 9315 Parallel Capacity/Redundant System with PHP SSBM

164201373 Rev. A 092402

List of Figures (cont.)

F i g u r e 9 --- 8 . U n i t S t a t i s t i c s S c r e e n 9 --- 1 0.......................................

F i g u r e 9 --- 9 . M i m i c S c r e e n 9 --- 1 1..............................................

F i g u r e 9 --- 1 0 . T i me S e t u p S c r e e n 9 --- 1 2........................................

F i g u r e 9 --- 1 1 . Po r t S e t u p S c r e e n 9 --- 1 3........................................

Figure 11---1. Remote Monitor Panel 11---2.....................................

Figure 11---2. Relay Interface Module 11---4....................................

Figure 11---3. Supervisory Contact Module 11---5...............................

F i g u r e 1 3 --- 1 . P o r t 1 P i n A s s i g n m e n t s 1 3 --- 2....................................

F i g u r e 1 3 --- 2 . P o r t 2 P i n A s s i g n m e n t s 1 3 --- 3....................................

Figure 13---3. Setup Serial Port 1 Screen 13---4.................................

F i g u r e 1 3 --- 4 . E v e n t H i s t o r y L o g 1 3 --- 8.........................................

Figure 13---5. System Meters Screen 13---9.....................................

Inhaltsverzeichnis

Andere Powerware UPS Handbücher

Powerware

Powerware 9155 Bedienungsanleitung

Powerware

Powerware Uninterruptible Power Supply Bedienungsanleitung

Powerware

Powerware 9125 Bedienungsanleitung

Powerware

Powerware 5125 Bedienungsanleitung

Powerware

Powerware 9330 Bedienungsanleitung

Powerware

Powerware 5115 Bedienungsanleitung

Powerware

Powerware 9120 Bedienungsanleitung

Powerware

Powerware Ferrups FE/QFE UPS Bedienungsanleitung

Powerware

Powerware 5125 Tower Bedienungsanleitung

Powerware

Powerware 9330 Bedienungsanleitung

Powerware

Powerware 5115 RM Bedienungsanleitung

Powerware

Powerware 9125 Bedienungsanleitung

Powerware

Powerware Prestige 6000 Einrichtungshandbuch

Powerware

Powerware 9335 Bedienungsanleitung

Powerware

Powerware FERRUPS QFER Bedienungsanleitung

Powerware

Powerware 9315 Bedienungsanleitung

Powerware

Powerware 3110 Bedienungsanleitung

Powerware

Powerware 9315 Bedienungsanleitung

Powerware

Powerware 9170+ Bedienungsanleitung

Powerware

Powerware 5140 Bedienungsanleitung

Powerware

Powerware 9125 Bedienungsanleitung

Powerware

Powerware 5115 Bedienungsanleitung

Powerware

Powerware 700 3000 VA Bedienungsanleitung

Powerware

Powerware 9170+ Bedienungsanleitung

Beliebte UPS Handbücher anderer Marken

Pylontech

Pylontech Victron & Pylontech US5000 Bedienungsanleitung

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Bedienungsanleitung

Mecer

Mecer ME-1000-WTU Bedienungsanleitung

Mustek

Mustek PowerMust 530(B) Plus Installations- und Betriebshandbuch

Emerson

Emerson Liebert NXL series Bedienungsanleitung

MAKELSAN

MAKELSAN BOXER SERIES Bedienungsanleitung

Block

Block PC-0524-400-0 Bedienungsanleitung

CyberPower

CyberPower CP585LCD Bedienungsanleitung

Eaton

Eaton 3S Montageanleitung

CyberPower

CyberPower Office Tower Series UPS 1000 Bedienungsanleitung

CyberPower

CyberPower BM100 Bedienungsanleitung

Best Power

Best Power 610 Bedienungsanleitung

Best Power

Best Power Unity/I UT3K Bedienungsanleitung

Mustek

Mustek PowerMust 400 Offline Bedienungsanleitung

Xantrex

Xantrex Trace 512 UR-UPS Bedienungsanleitung

Forza

Forza SL-1501UL Bedienungsanleitung

LEGRAND

LEGRAND keor 310081 Bedienungsanleitung

ABB

ABB Conceptpower DPA 500 Bedienungsanleitung