Powerware Prestige 6000 Einrichtungshandbuch

powerware®

Prestige Series

6000 VA

Installation and Operator’s Manual for IBM Applications

Requesting a Declaration of Conformity

Units that are labeled with a CE mark comply with the following harmonic standards and EU directives:

Harmonic Standards: EN 50091-1-1 and EN 50091-2

EU Directives: 73/23/EEC, Council Directive on equipment designed for use within certain voltage limits

93/68/EEC, Amending Directive 73/23/EEC

89/336/EEC, Council Directive relating to electromagnetic compatibility

92/31/EEC, Amending Directive 89/336/EEC relating to EMC

The EC Declaration of Conformity is available upon request for products with a CE mark. For copies of the EC

Declaration of Conformity, contact:

Powerware Corporation

Koskelontie 13

FIN-02920 Espoo

Finland

Phone: +358-9-452 661

Fax: +358-9-452 665 68

Class A EMC Statements

FCC Part 15

NOTE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when

the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at his own expense.

ICES-003

This Class A Interference Causing Equipment meets all requirements of the Canadian Interference Causing Equipment

Regulations ICES-003.

Cet appareil numérique de la classe A respecte toutes les exigences du Reglement sur le matériel brouilleur du Canada.

EN50091-2

Some configurations are classified under EN50091-2 as “Class-A UPS for Unrestricted Sales Distribution.” For these

configurations, the following applies:

WARNING This is a Class A-UPS Product. In a domestic environment, this product may cause radio interference, in

which case, the user may be required to take additional measures.

Powerware, PowerPass, Powercare, OnliNet, and OnliSafe are registered trademarks of Powerware Corporation.

IBM and AS/400 are registered trademarks of International Business Machines Corp.

Novell is a registered trademark of Novell, Inc.

3Com is a registered trademark of 3Com Corporation.

document may be reproduced in any way without the express written approval of Powerware Corporation.

QUICK INSTALL

UPS with PPDM Installation

CAUTION

Read the safetyinstructions beginning on page 7 before installing the UPS.

1If you are connecting the UPS to an AS/400, the QUPSDLYTIM system value for the UPS

Monitoring feature should be set. See “UPS Monitoring” on page 50 for instructions.

PowerPass

Distribution

ModelNumber

Desired

Output

Voltage

Selector

Position

208: ___ 120/208V 208

100/200V 200

110/220V 220

240: ___ 115/230V 230

120/240V 240

Quick Install

10 For the AS/400 interface, plug the AS/400 communications cable into the serial port on the

UPS rear panel. Plug the other end of the cable into the J14 connector on your AS/400.

Quick Install

Thispage intentionallyleft blank.

Powerware®PrestigeSeriesInstallationandOperator’sManual forIBMApplications(6000 VA)Uncontrolled Copy

TABLE OF CONTENTS

1 Introduction 1....................................................

UPS Model and BatteryConfigurations 2..............................................

Load Requirements 2.........................................................

Approximate Battery Times 4....................................................

SpecialSymbols 6..............................................................

2 Safety Warnings 7.................................................

3 Installation 31.....................................................

Unpacking and Inspection 31.......................................................

UPS and Battery Cabinet Storage 31...............................................

UPS with PowerPass Distribution Module Installation 32...................................

UPS with PPDM Startup 39......................................................

REPOInstallation 41...........................................................

Troubleshooting Tips 43...........................................................

4 UPS Operation 45..................................................

UPS Front Panel 45..............................................................

Operating Modes 46.............................................................

NormalMode 46.............................................................

BypassMode 47.............................................................

BatteryMode 47.............................................................

Diagnostics 48.................................................................

Battery Test on Demand 48......................................................

BatteryStart 48................................................................

UPSShutdown 49...............................................................

Changing the Output Voltage 49.....................................................

UPSMonitoring 50..............................................................

Using the PPDM 51..............................................................

Disconnecting the UPS 51.......................................................

Reconnecting the UPS 53.......................................................

5 Communication 55.................................................

InitialCommunicationsSettings 55...................................................

Front PanelCommunications Access 56...............................................

UPSSerialCommunicationsMenu 58.................................................

Power Management Software 61....................................................

Table of Contents

ii Powerware®PrestigeSeriesInstallation and Operator’sManualforIBMApplications (6000VA)Uncontrolled Copy

UPS Communications Interface Port 62................................................

Communications Mode Reference Chart 63.............................................

6 Specifications 65..................................................

Prestige 6000 Specifications 65.....................................................

PhysicalSpecifications 66.........................................................

TechnicalSpecifications 66........................................................

PPDM Outletsand Input and Output Cords 67...........................................

Electrical Specifications for the Prestige 6000 with PPDM 67................................

Part Numbers 68................................................................

Base Equipment 68...........................................................

Standard Accessories 68........................................................

OptionalAccessories 68........................................................

Manuals 69.................................................................

7 Troubleshooting 71.................................................

Resetting the UPS 73............................................................

Silencing the Alarm 73...........................................................

8 Service and Support 75..............................................

AS/400 9910 UPS Service and Support 75..............................................

S/390 9910 UPS Service and Support 79...............................................

Index 87.........................................................

Powerware®PrestigeSeriesInstallation and Operator’sManualforIBMApplications (6000VA)Uncontrolled Copy

CHAPTER 1

INTRODUCTION

Congratulations on the purchase of your Powerware

Prestige Series

uninterruptible power system (UPS). The Prestige UPS meets the

toughest measures of superior design and manufacturing, including

ISO 9001. You now own the most reliable power protection available.

The Prestige 6000 provides a steady, well-regulated power supply for

your computing and communications equipment, while protecting it

from the frequent irregularities that are inherent in commercially

available power. Voltage spikes, power surges, brownouts, and power

failures have the potential to corrupt critical data, destroy unsaved work

sessions, and in some instances, damage expensive hardware.

With the Prestige 6000, you can safely eliminate the effects of electrical

line disturbances and guard the integrity of your systems and

equipment. The PowerPass

Distribution Module (PPDM) has a

Maintenance Bypass feature that supplies power to your equipment even

when the power processing unit (PPU) is removed for maintenance or

upgrades. Figure 1 shows the Prestige 6000 UPS.

Figure 1.Prestige 6000 UPS

Introduction

2Powerware®PrestigeSeriesInstallation and Operator’sManualforIBMApplications (6000VA)Uncontrolled Copy

UPS Model and Battery Configurations

This UPS is designed to work with single-phase, three-wire, AC power

sources. There are two important considerations when selecting the UPS

model and battery configuration to properly safeguard your equipment:

Load requirements

Battery times

Load Requirements

The load is the equipment to be protected by the UPS. Select the UPS

model that meets the power consumption requirements of the load in

volt-amperes (VA). The total load VA should not exceed the UPS VA

rating. To determine the total load requirements:

1. Obtain the load ratings from either the nameplate or operator’s

manual of the equipment to be protected by the UPS. The

ratings are listed in either watts (W), amperes or amperes

max (A), or volt-amperes.

2. If the rating is in watts, multiply by 1.4 to obtain the VA

requirement (this is the typical relationship betweenwatts and

volt-ampere ratings in most computing equipment). However,

in some new computing equipment, the power supply is

power-factor corrected and the watts rating equals the VA

requirement. Check with the manufacturer to determine

applicability.

If the rating is in amperes or amperes max, multiply by the

input voltage to obtain the VA requirement.

NOTE FortheloadratingsofAS/400modelsandattachabledevices,seeChapter9of

“AS/400 PhysicalPlanning Reference,” SC41-5109.

Inhaltsverzeichnis

Andere Powerware UPS Handbücher

Powerware

Powerware Ferrups FE/QFE 500VA Bedienungsanleitung

Powerware

Powerware 9355 Bedienungsanleitung

Powerware

Powerware 5119 RM Bedienungsanleitung

Powerware

Powerware 5110 Bedienungsanleitung

Powerware

Powerware 9335 Bedienungsanleitung

Powerware

Powerware 9315 Bedienungsanleitung

Powerware

Powerware 9315s Bedienungsanleitung

Powerware

Powerware 5140 Bedienungsanleitung

Powerware

Powerware 9315 Bedienungsanleitung

Powerware

Powerware PowerRite XT Bedienungsanleitung

Powerware

Powerware 9125 Bedienungsanleitung

Powerware

Powerware 9315 Bedienungsanleitung

Powerware

Powerware 3105 Bedienungsanleitung

Powerware

Powerware 9125 PowerPass Bedienungsanleitung

Powerware

Powerware 9120 Bedienungsanleitung

Powerware

Powerware 9330 Bedienungsanleitung

Powerware

Powerware 9170+ Bedienungsanleitung

Powerware

Powerware 9120 Bedienungsanleitung

Powerware

Powerware 9395 Bedienungsanleitung

Powerware

Powerware Ferrups FE/QFE UPS Bedienungsanleitung

Powerware

Powerware 5115 RM Bedienungsanleitung

Powerware

Powerware 300 VA Bedienungsanleitung

Powerware

Powerware 9910 p Series Bedienungsanleitung

Powerware

Powerware 9155 Bedienungsanleitung

Beliebte UPS Handbücher anderer Marken

Pylontech

Pylontech Victron & Pylontech US5000 Bedienungsanleitung

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Bedienungsanleitung

Mecer

Mecer ME-1000-WTU Bedienungsanleitung

Mustek

Mustek PowerMust 530(B) Plus Installations- und Betriebshandbuch

Emerson

Emerson Liebert NXL series Bedienungsanleitung

MAKELSAN

MAKELSAN BOXER SERIES Bedienungsanleitung

Block

Block PC-0524-400-0 Bedienungsanleitung

CyberPower

CyberPower CP585LCD Bedienungsanleitung

Eaton

Eaton 3S Montageanleitung

CyberPower

CyberPower Office Tower Series UPS 1000 Bedienungsanleitung

CyberPower

CyberPower BM100 Bedienungsanleitung

Best Power

Best Power 610 Bedienungsanleitung

Best Power

Best Power Unity/I UT3K Bedienungsanleitung

Mustek

Mustek PowerMust 400 Offline Bedienungsanleitung

Xantrex

Xantrex Trace 512 UR-UPS Bedienungsanleitung

Forza

Forza SL-1501UL Bedienungsanleitung

LEGRAND

LEGRAND keor 310081 Bedienungsanleitung

ABB

ABB Conceptpower DPA 500 Bedienungsanleitung