Prem-I-Air TC-N9KM Bedienungsanleitung

Mobile Air Conditioner

Instruction Manual

Model TC-N9KM

Please read and retain these

instructions for future reference

SPECIFICATION

Model no. TC-N9KM

Cooling capacity 8500 BTU

2490 W

Power/Ampere consumption for

cooling* 830W/ 3.7A

Air volume (max. speed)

Humidity removal capacity 1.2 L/hr

Power supply 220-240V~, 50Hz

Compressor Rotary

Refrigerant R410a

Fan speed 2

Timer Mechanical switch 1 – 8 hours

Working temperature Cooling 18 - 32ºC

Net Weight 30 kg

Dimension 400 x 377 x 750mm (WxDxH)

PLEASE NOTE:

The data marked with '*' may vary for technical reason, for actual data please refer to the rating label

placed at the back of the unit.

Please note: Due to continuous research and development the specifications are subject to change without

notice.

350 m3/h

BEFORE USE

Important Safety Instructions

1. Transport & store the unit in an upright position only. Leave it in an upright position for at least 3 hours before

first use.

2. Always place the unit on an even, level surface.

3. An opening in a window or wall is required to accommodate the exhaust hose to expel the hot air.

4. Make sure the unit is connected to an earthed power supply of the correct rating. (Refer to the rating label

located at the back of the unit).

5. The unit will cool when the room temperature is between 18°C~32°C depending on the thermostat setting.

6. DO NOT use this unit for functions other than those described in this instruction manual.

7. DO NOT tilt the unit.

8. DO NOT cover or obstruct the appliance’s inlet and outlet grilles.

9. Your air conditioner has been designed to be used only in the home, office and similar conditions and should

not be used for any other purpose.

10. This unit is for indoor use only.

11. Never unplug the air conditioner while it is working, this could damage the electronic circuits.

12. DO NOT use the appliance in a wet room, such as a bathroom or laundry room to avoid the risk of electrical

shocks.

13. Do not bend or crush the warm air exhaust hose.

14. DO NOT sit or place articles on the appliance.

15. DO NOT use the appliance with wet or damp hands.

16. DO NOT let chemical substances come into contact with the appliance.

17. DO NOT use the appliance in the presence of flammable substances or vapours such as alcohol, insecticides,

petrol, etc.

18. DO NOT use the plug to start and stop the appliance. ALWAYS use the intended control panel to start and stop

the unit.

19. ALWAYS turn off the appliance when it is not in use and remove the mains plug from the socket outlet.

20. ALWAYS turn the unit off and remove the mains plug before cleaning, carrying out maintenance or moving

location.

21. Avoid the use of adapter plugs, multiple sockets and /or extension leads. If their use is necessary, ensure they

conform to current safety standards.

22. Do not pull the electrical cable or place it near a source of heat: always unroll it completely to avoid dangerous

overheating. If the power cord becomes damaged, the service agent or a similarly qualified person must

replace it, in order to avoid a hazard.

23. The filter must be used with the product at all times, when removing it for clearing always turn the unit off and

unplug the mains plug from the socket.

24. Do not operate the unit with a damaged power cord or plug, after it malfunctions, has been dropped or

damaged. If the power cord is damaged it must be replaced by the manufacturer or a qualified service engineer

to avoid a hazard.

25. Closely supervise any children and pets when unit is in use

26. Only use in the upright position on a flat level surface and at least 50cm from any objects.

WALL

Front Back

1. Control Panel

2. Air outlet

3. Carry handle

4. Caster

5. Air filter

6. Air inlet

7. Exhaust air outlet

8. Cord storage

9. Water stopper / drainage point

Accessories

10. Indoor adaptor - for insertion

over hose and into back

of the air

conditioner.

11. Outdoor adaptor - for insertion

over hose and into foam strip (or

into hole in the wall/window).

12. Exhaust hose

13. Foam strip - for filling the open

window space and with hole for

connection to exhaust hose.

14. Foam strip - for filling the open

window space

15. Round cap for filling the hole in

wall/window.

16. Drain tube for continuous

drainage

17. Water tray

18. Active carbon filter

19. Remote control (for electronic

model only)

PARTS

• Place the foam window strips against the window. Mark and cut them to size if necessary.

• Feed exhaust hose through the foam strip and insert strip into window gaps as shown. Slide window across

so that foam is held securely. This technique may also be used for sash windows. Note: Please take care

to maintain protection against intruders

2. Using the adaptor

• Cut a 130mm diameter hole in the wall or window, using the appropriate tools and safety equipment.

• Feed exhaust hose through the window or wall and attach the outdoor adaptor from the outside as shown.

• When not in use, cover the hole with the cap (15. on accessories list) provided.

Foam strips

INSTALLATION

Installation of the exhaust pipe

The unit is a portable air conditioner, which can be moved from room to room.

1. Using the foam strips

• These are not suitable for hinged window systems

Wall or window

Outdoor adapter

Installing the exhaust hose

• Use only the hose provided and clip exhaust hose and unit adaptor to the back of the air

conditioner.

• Avoid kinks and bends in the exhaust hose as this will cause expelled moist air to build up

causing the unit to overheat and shut down.

• The hose may be extended from 300mm to 1500mm, but for maximum efficiency use the shortest

length possible.

WARNING!

Do not replace or extend the hose as this could cause the unit to malfunction.

Installation of the carbon filter

1. Remove the filter frame from the

unit.

2. Separate the filter fixer from the

filter frame.

3. Remove the active carbon filter

from its plastic bag.

4. Insert the active carbon filter into

the filter frame.

5. Fix the filter by reassembling the

fixer onto the filter frame.

6. Re-fit the filter frame inside the

unit.

Setting Temperature

Turn the THERMOSTAT clockwise to adjust to the temperature required.

Set Timer

Set the TIMER to the desired operating time (1 to 8 hours). When the unit finishes the set time it

will automatically switch off.

Regulating air flow direction

Turn the roller on the air vent to control the

air flow direction of the vertical louvres. Move the air vent directly to adjust the air flow

direction of the horizontal louvres.

NOTE

1. To prolong the life of the unit please wait at least 3 minutes before restarting the unit after it has been

switched off.

2. The cooling system will switch off if the ambient temperature is lower than the set temperature. As the

ambient temperature rises above the set temperature the cooling function will re-start.

OPERATING INSTRUCTIONS

For Maximum Efficiency

• Close doors and windows.

• Keep curtains and blinds closed during the sunniest part of the day.

• Regularly clean filters.

• Once room has reached the desired conditions, reduce temperature and ventilation settings.

Cooling only model

1. Power indicator light

2. Fan operating indicator light

3. Cooling operating indicator light

4. 'Full water' indicator light

5. Thermostat

6. Speed switch with options for - LOW FAN,

HIGH FAN, LOW COOL, HIGH COOL

7. Timer (1-8 hours) as well as ON/OFF

switch

Turning ON/OFF

Set TIMER to ON for continuous operation (the unit will operate as long as it is not turned off).

Power indicator light will illuminate

To turn off the unit, turn the TIMER to the OFF position.

Setting function / ventilation speed

Cooling only models

Turn the speed switch to select required setting:

LOW FAN, HIGH FAN, LOW COOL, HIGH COOL

SPEED

High Cool

Low Cool

Low Fan

High Fan

DRAINAGE

During the process of cooling, some water will be extracted from the air into the unit. If the reservoir is full:

On the mechanical model the compressor will stop. The fan will continue to circulate the air. The ‘FULL WATER’

indicator will illuminate to remind you.

To re-start the unit empty the collected water in one the following ways:

1. Turn off the air conditioner and avoid

moving it when full.

2. Position the water tray underneath the drain

hole.

3. the drain hole and allow the water to drain

out.

4. When the water tray is almost full, replace

the rubber plug in the drain hole and empty

the water tray.

5. Repeat until the unit is emptied.

6. Replace the rubber plug and tighten the

7. Switch on the unit - the comp light should

not be flashing.

If you wish to operate the unit without the need to empty the water tank, please:

•

and retain for future use.

• Connect the drain tube supplied to the

water outlet as shown and locate the

other end into a drain.

• The drain tube may be extended by

adding an extension tube and using a

suitable connector, (not supplied by the

manufacturer).

Please note

1. The drain must be at or below the

outlet level.

Flashing comp / ‘full water’ indicator will

not function in this mode of drainage.

3. If you want to extend the water tube,

you can connect it with another tube

(OD: 18mm)

with drain cap

with drain cap firmly.

Remove the with drain cap & rubber plug from

Remove the with drain cap and rubber plug

with drain cap

MAINTENANCE

Always switch off and unplug the air conditioner from the mains before cleaning.

To maximize the efficiency of the air conditioner clean regularly.

Cleaning the housing

Use a soft, damp cloth to wipe the body clean.

Never use aggressive chemicals, gasoline, detergents, chemically treated cloths, or other cleansing solutions.

These could all damage the unit casing.

Cleaning the filter

Use a vacuum cleaner or tap the filter lightly to remove loose dust and dirt from the filters and then rinse thoroughly

under running water (no hotter than 40°C). Dry thoroughly before replacing. Never operate the unit without the

filters.

End of season storage

• Drain any water in the unit before completely

operating the unit on ventilation only mode for

a few hours, to thoroughly dry the inside.

• Clean or change the filter

• Unplug and store the power cord as shown

• Replace in the original carton or cover for

storage.

Trouble Shooting

The air conditioner does not run.  Is the air conditioner plugged in?

 Is there a power failure?

 Is the ‘Full Water’ indicator flashing?

 Is the room temperature below the set

temperature?

The machine seems to have little

cooling effect.  Is there direct sunshine? (Please close the curtains

or blinds.)

 Are too many windows or doors open?

 Are there too many people in the room?

 Is there something in the room producing lots of

heat?

The machine is not cooling.  Is the filter dusty, contaminated?

 Is the air intake or output blocked up?

 Is the room temperature below your selected

temperature?

Too noisy  Is the machine positioned unevenly, thus creating

vibration?

 Is the floor underneath the machine uneven?

The compressor doesn’t run.  It is possible the overheat protector for the

compressor is in operation. Wait for the

compressor to cool down.

*Never try to repair or dismantle the unit yourself

Inhaltsverzeichnis

Andere Prem-I-Air Klimaanlage Handbücher

Prem-I-Air

Prem-I-Air EH1920 Bedienungsanleitung

Prem-I-Air

Prem-I-Air EH0537 Bedienungsanleitung

Prem-I-Air

Prem-I-Air ACS16E Bedienungsanleitung

Prem-I-Air

Prem-I-Air PAC1130 Bedienungsanleitung

Prem-I-Air

Prem-I-Air Elite EH1460 Bedienungsanleitung

Prem-I-Air

Prem-I-Air EH1922 Bedienungsanleitung

Prem-I-Air

Prem-I-Air EH0530 Bedienungsanleitung

Prem-I-Air

Prem-I-Air PMSF09 Series Bedienungsanleitung

Prem-I-Air

Prem-I-Air EH1770 Bedienungsanleitung

Prem-I-Air

Prem-I-Air PREMAC20 Bedienungsanleitung

Prem-I-Air

Prem-I-Air KY-32/K101 Bedienungsanleitung

Prem-I-Air

Prem-I-Air PMINV18 Bedienungsanleitung

Prem-I-Air

Prem-I-Air EH1616 Bedienungsanleitung

Prem-I-Air

Prem-I-Air TC8041 Bedienungsanleitung

Prem-I-Air

Prem-I-Air EH1924 Bedienungsanleitung

Prem-I-Air

Prem-I-Air EH1908 Bedienungsanleitung

Prem-I-Air

Prem-I-Air EH0539 Bedienungsanleitung

Prem-I-Air

Prem-I-Air TC1046 Bedienungsanleitung

Prem-I-Air

Prem-I-Air KY32 Bedienungsanleitung

Prem-I-Air

Prem-I-Air KY-44B Bedienungsanleitung

Prem-I-Air

Prem-I-Air EH1413 Bedienungsanleitung

Prem-I-Air

Prem-I-Air KY32 Bedienungsanleitung

Prem-I-Air

Prem-I-Air EH1768 Bedienungsanleitung

Prem-I-Air

Prem-I-Air EH1672 Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

Soleus Air

Soleus Air GB-PAC-08E4 Bedienungsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung