Premier Mounts PFC-OMND Bedienungsanleitung

www.premiermounts.com | North America 800.368.9700 | International +1-714-632-7100

2620 Palisades Drive, Corona, CA 92882 USA

INSTALLATION GUIDE

PFC-OMND

Premier Floor Ceiling Mount

For Samsung OM46N-D and OM55N-D

9500355 v1.2

publ. 07/15/20

Optional Base

Installation Guide

PFC-OMND

www.premiermounts.com | North America 800.368.9700 | International +1-714-632-7100

Page 2

INCLUDED COMPONENTS:

FLOOR WITH OPTIONAL

BASE

CEILING FLOOR TO CEILING

SUITABLE APPLICATIONS:

M5 Allen Key

(Qty: 1)

5/16” x 3” Hex

Head Lag (Qty: 4)

M8 x 16mm Button

Hex (Qty: 8)

5/16” Flat Washer

(Qty: 4)

Twist Action Finned

Anchor (Qty: 4)

Mounting Template

(Qty: 1)

Cable Management Covers (Qty: 2 Pair)

2000mm Long Bar (Qty: 1 Pair)

M8 x 35mm Button

Hex (Qty: 8)

Snap On Dome

Cap (Qty: 4)

M4 x 10mm Pan

Head (Qty: 2)

End Cap (Qty: 2) Leg (Qty: 2)

Installation Guide

PFC-OMND

www.premiermounts.com | North America 800.368.9700 | International +1-714-632-7100

Page 3

Viewing Height is adjustable by installing at

optional fixed mounting location.

Table shown aboved measured from bottom of

the base.

Subtract 1/4” [6.35] if using the dimension to cut

[actual length 78.65” [1997.7] ] long bar.

DETERMINE THE VIEWING HEIGHT

APPLICATIONS:

• CEILING

• FLOOR TO CEILING

OM46N-D Y- DIM OM55N-D

59-0” [1498.4] A54-1/8” [1376.0]

64-1/8” [1628.8] B59-1/2” [1512.5]

65-7/8” [1671.8] C60-0” [1524.5]

72-0” [1828.8] D61-3/4” [1567.5]

75-1/8” [1908.4] E67-7/8” [1724.5]

78-7/8” [2004.2] F78-7/8” [2004.2]

85-1/4” [2165.3] G82-5/8” [2099.9]

85-3/4” [2177.3] H89-0” [2261.0]

87-3/8” [2220.3] I91-1/8” [2316.0]

Y-DIM

“A”

(Min)

Y-DIM

“I”

(Max)

From center to bottom edge

21” [532.1] for OM46N-D

24-3/4” [627.9] for OM55N-D

1/4”

[6.35]

See

Table

Installation Guide

PFC-OMND

www.premiermounts.com | North America 800.368.9700 | International +1-714-632-7100

Page 4

Viewing height is mounted

at a fixed location and can

only be adjusted by cutting

the bar.

DETERMINE THE VIEWING HEIGHT

APPLICATIONS:

• FLOOR

• FLOOR TO CEILING

• OPTIONAL FLOOR BASE

Table shown aboved measured from bottom of the base.

Subtract 1/4” [6.35] if using the dimension to cut [actual length 78.65” [1997.7] ] long bar.

1/4”

[6.35]

Y-DIM

See

Table

78 -7/8 ” [20 04.1]

Max Height

OM46N-D Y- DIM OM55N-D

55 -3/8” [1416.8] Standard 52” [1321]

32-3/8” [832.6] Cut to lowest

postion 29” [737]

From the top to center

23-1/8” [587.3] for OM46N-D

26-7/8” [683] for OM55N-D

Cut Length

in 1” increment

23.0” [584.2] Max

to get to the lowest

position.

Installation Guide

PFC-OMND

www.premiermounts.com | North America 800.368.9700 | International +1-714-632-7100

Page 5

DETERMINE THE VIEWING HEIGHT

APPLICATIONS:

• FLOOR TO CEILING (USES X2 PFC-OMND).

Cutting only to fit

between the floor

and ceiling.

157-7/8” [4008.4]

Max Height

Table shown aboved measured from bottom of

the base.

Subtract 1/4” [6.35] if using the dimension to cut

[actual length 78.65” [1997.7] long bar.

1/4”

[6.35]

If power and data are

routed from the ceiling,

adjustable viewing height

by installing at varies

mounting location. See

table on page 3.

If power and data are

routed from the floor, the

viewing height is mounted

at a fixed location and can

only be adjusted by cutting

the bar. See page 4.

Section Line (center)

78-7/8” [2004.2]

Installation Guide

PFC-OMND

www.premiermounts.com | North America 800.368.9700 | International +1-714-632-7100

Page 6

Center Mark 46”

46” 55”

55”

For mounting the template

temporary in place.

USE THE TEMPLATE FOR PRE-INSTALLATION

REMOVE THE HANDLES

Finned Anchor

Concrete only

Position the template to the desired location.

Mark the mounting points based of the flat-panel

display sizes, either 46” or 55”

Drill into 4 marked mounting points using specific

size bit depending on the application.

Wood Application:

Use 1/4” drill bit

Concrete Application:

Make a pilot hole with 1/8”

or 7/32” drill bit.

Finish with 3/8” drill bit.

Use Drill Bit by

application

Snap-on

Cap

5/16” x 3” Hex Lag

Screw with 5/16”

Washer

See OMN (Semi-outdoor installation guide) for further details.

Installation Guide

PFC-OMND

www.premiermounts.com | North America 800.368.9700 | International +1-714-632-7100

Page 7

1. Remove the handles (if attached on the OMN-D) before proceeding.

2. Carefully transport the flat-panel display to the mount and fasten using

M8 x 35mm Button Hex screws where applicable. A minimum of 4

mounting points (2 per side) must be use to safety secure the display.

INSTALLING THE OMN-D TO THE MOUNT

2 Person

Recommended

Manually operated

material lift

(Recommended)

Floor InstallationCeiling Installation

M5 X 35

Button Hex

Shown using OMN55-D for visual clarity. Mounting location will vary based on the viewing height.

minimum of 2

mounting points

per side

minimum of 2

mounting points

per side

Installation Guide

PFC-OMND

www.premiermounts.com | North America 800.368.9700 | International +1-714-632-7100

Page 8

FLOOR INSTALLATION

CEILING INSTALLATION

ROUTE POWER AND DATA CABLE WITHIN THE CHANNEL OF THE MOUNT.

Not to scale

Samsung OMN-D Installation

Guide must be read within

conjuction of all step within

this guide.

Route power and data along the

inner side of the raceway.

Use zip ties to securely hold the

cables inside.

Front Section View

OMN-D

Route power and data through the cable access slot

along the outer side of the bar.

Cable

access

slot

Installation Guide

PFC-OMND

www.premiermounts.com | North America 800.368.9700 | International +1-714-632-7100

Page 9

INSTALL THE CABLE MANGEMENT COVERS

THE MOUNT IS READY.

1. Cut the vinyl covers to size if applicable.

2. Make a cutout for the power cable.

3. The endcaps are removable for ease of installation.

4. Slide in or pinch and push the vinyl covers into the raceway.

Pinch and push

into the raceway

PUSH

M4 x 10mm Pan

Head Screw

Endcap

Vinyl covers

Cutout for

the power

cable

Installation Guide

PFC-OMND

www.premiermounts.com | North America 800.368.9700 | International +1-714-632-7100

Page 10

OPTIONAL: CUT THE BAR WITHIN RANGE

USE METAL CUTTING

SAW BLADE

Minimum Cut Length

@ 1.75” [44.5mm]

1” [25.4mm] increments

Maximum Cut Length @ 23.00” [584.2mm]

Inhaltsverzeichnis

Andere Premier Mounts Rack & Stand Handbücher

Premier Mounts

Premier Mounts ECM-3763S Bedienungsanleitung

Premier Mounts

Premier Mounts MM-HP15 Bedienungsanleitung

Premier Mounts

Premier Mounts USA Bedienungsanleitung

Premier Mounts

Premier Mounts MVW463 Bedienungsanleitung

Premier Mounts

Premier Mounts FLIP Bedienungsanleitung

Premier Mounts

Premier Mounts SCM-103 Bedienungsanleitung

Premier Mounts

Premier Mounts AM95 Bedienungsanleitung

Premier Mounts

Premier Mounts 7170-0977 Series Bedienungsanleitung

Premier Mounts

Premier Mounts PCM-MS2 Bedienungsanleitung

Premier Mounts

Premier Mounts AM65 Bedienungsanleitung

Premier Mounts

Premier Mounts PDS-PLUS Bedienungsanleitung

Premier Mounts

Premier Mounts MM-CP15 Bedienungsanleitung

Premier Mounts

Premier Mounts EST100 Bedienungsanleitung

Premier Mounts

Premier Mounts ECM-3763D Bedienungsanleitung

Premier Mounts

Premier Mounts Convergent Series Bedienungsanleitung

Premier Mounts

Premier Mounts PBC-1.5 Series Bedienungsanleitung

Premier Mounts

Premier Mounts AM50 Bedienungsanleitung

Premier Mounts

Premier Mounts PSPK Bedienungsanleitung

Premier Mounts

Premier Mounts ECM-D70T Bedienungsanleitung

Premier Mounts

Premier Mounts Elliptical Floor Cart and Stand PSD-EB72C Bedienungsanleitung

Premier Mounts

Premier Mounts AST-2446 Bedienungsanleitung

Premier Mounts

Premier Mounts PBL-200 Bedienungsanleitung

Premier Mounts

Premier Mounts PP-FCTA-QL Bedienungsanleitung

Premier Mounts

Premier Mounts PSD-TL Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung