Prestigio P3223W Bedienungsanleitung

TABLEOFCONTENTS

Important safety intrstructions………………………………………………………………………………………………………………….。2

1. Introduction …………………………………………………………………………………………………………………………………..。4

1.1 General information …………………………………………………………………………………………………………………………….4

1.2 Features …………………………………………………………………………………………………………………………………………4

1.3 Check the list………………………………………………………………………………. ……………………………………………………5

2. Installing the monitor…………………………………………………………………………………………………………………………….5

2.1 Base installation…………………………………………………………………………………………………………………………………..6

2.2 Wall Mounting with VESA standard…………………………………………………………………………………………………………….7

2.3 Signal Cable Connection………………………………………………………………………………………………………………………….7

2.4Audio cable connection…………………………………………………………………………………………………………………………..7

2.5 Power cord Connection…………………………………………………………………………………………………………………………..7

2.6 Power on ………………………………………………………………………………………………………………………………………….8

2.7 Self test pattern……………………………………………………………………………………………………………………………………8

2.8 Adjust the pictures…………………………………………………………………………. ………………………………………………。….9

3. Operation ……………………………………………………………………………………………………………………………………。…9

3.1 Power ON /OFF Switch ………………………………………………………………………………………………………………………。.9

3.2 Power LED indicator…………………………………………………………………….. …………………………………………………。…9

3.3 OSD control keys…………………………………………………………………………. …………………………………………………。...10

3.4 OSD menu ……………………………………………………………………………………………………………………………………。..10

3.5 Safety mode……………………………………………………………………………………………………………………………………。。14

3.6 Timing guide…………………………………………………………………………………………………………………………………。..14

3.7 Plug play……………………………………………………………………………………………………………………………………。…16

3.8 Power management……………………………………………………………………. ……………………………………………. ……….16

3.9 Volume adjust…………………………………………………………………….…………………………………………………………….16

4 .specification……………………………………………………………………………………………………………………………………..17

5. Simple troubleshooting………………………………………………………………………………………………………………………….19

Important Safety Instructions:

1. Read the manual carefully before using the monitor.

2. Save these user manual for later use.

3. Unplug the monitor from the power source when you clean the monitor. Don’t use liquid cleaners or aerosol cleaners.

Use cloth to clean it. If it can’t be done, please use LCD screen cleaners.

4. Don’t use attachments which are not recommended as they may cause hazards.

5. Please grasp the plug to unplug the connector from the wall outlet .Don’t pull the power cord to unplug it.

6. Don’t place anything on the power cord or step on it.

7. Don’t place the monitor near water source such as bathtub, washbowl, sink, laundry tub, swimming pool etc.

8. The slots are designed for ventilation, simultaneously to keep the machinery workable and protect it from overheating.

For the same reason,. please do not place the monitor on the bed, sofa, carpets or other similar surface. Don’t place the

monitor near or over heat source or place in built-in installation.

9. Keep 5 cm away from the wall or other goods.

10. This monitor can only be used the power source indicated on the label. If you have questions, please consult your

dealer.

11. As safety measure, this monitor is equipped with a three-wire ground style plug. If you can’t insert the plug into the

outlet, please contact your electrician to replace your outlet. .Don’t defeat the safety purpose of the grounding-type

plug.

12. Please make sure that the outlet and power cord can afford the total electricity of the products.

13. Place the monitors in safe place where the cord will not be abused by persons working on it.

14. Follow all the warning and instructions illustrated on the manual.

15. Don’t overload the wall outlets and extend cords as it can result in fire or electric shocks.

16. Don’t remove or open the cover to service this monitor by yourself. It may expose you to dangerous voltage or other

hazards before all servicing to qualified service personnel.

17. Unplug this monitor from the outlets and refer servicing to qualified service personnel under the following conditions.

● The power cord is frayed or damaged.

● The monitor has been dropped or the cabinet has been damaged.

● When the monitor displays a distinct change it performance, this indicates a need for service.

18. The power cord is the main device to disconnect the power.

19. Unplug the power cord when you do not use it for long time.

20. Place the monitor in good ventilation and protect it from strong light, overheating and damp environment.

21. This monitor must be stored in temperature --20℃-55 ℃ .Otherwise, it may cause permanent damage.

1. Introduction

General information

This monitor is a high-performance intelligent multi-scanning color monitor. It is with 20.1 inch TFT LCD panel and

MCU digital control low radiation and glary with built-in power supply. The shape is tiny and thin adapting to small

place, which can save your more places.

Features

● The best working mode: 1680*1050@60 HZ

● Viewable angle: H: 160 V: 160

● Active area: 473。76 mm* 296。10 mm

● Pixel pitch : 0.282 mm *0.2825mm

● Max brightness: 300cd/㎡

● Max contrast: 800:1

● Response time: 5MS

● Color : 16.7 M

● Power saving compliant with EPA ENERGY STAR and VESA DPMS.

● Auto color balance. When it is connected to different graphic adapter, the monitor can calibrate the white and black

reference voltage.

● Plug & play, compatible with Windows 9* & ME&NT&2000&XP and VESA DDC1/2B.

Check the list

Please make sure that all of the following items are included before operating the monitor.

■ LCD monitor( include base)

■ Power cord, VGA signal cable ,DVI-D signal cable( optional), Audio cable(optional)，three bolts(there are used to

connect the base and knighthead),Audio cable(optional)

■ User’s manual

If any of the above listed items are missing. Please contact your dealer for technical support.

2. Installing the monitor

Please consider the following advice before you install the monitor.

Position

Choose a place that reflects less to place your monitor.

Generally, there is a suitable angle with a window.

Highness

The peak of the monitor should be a little lower than your eyes when you sit down.

Inclination

You will feel comfortable with the sloping screen.

2.1 Base installation( Fig 1)

1. After taking the monitor out of the carton, carefully turn the monitor on front side.

2 .Align the three bollt holes on the base with the three bolt holes on the knighthead of the monitor and screw the bolts with

a screwdriver.

2.2 Wall Mounting with VESA Standard(Fig 2)

1. Loose the two bolts with a screwdriver.Then the base and the knighthead can be taken off..In order to prevent the two

bolts from loose, it is better to assemble the fittings on the rear cover of the monitor.

2. Take off the omamental lips and clean up the signal cable, power cord, audio cable.

3. Fix the wall-mounting parts(optional parts according with VESA standard) on the rear cover to mount the monitor on the

wall.

2.3 Signal cable connection

Take off the omamental cover (operation method as Fig 3) and insert the signal cable VGA and DVI port

of a computer.Then lock up the cover with screws to assure full connection to the earth. Insert another

end of signal cable into the corresponding port(VGA or DVI port) snd lock up with screws.

2.4 Audio cable connection

Plug one side of the audio cable into the PC audio port, then plug the other side into the audio port of the monitor

2.5 Power cord connection

Plug one end of the powder cord into the input port of the monitor’s power supply and then insert the other end into the

socket of the electrical source. Assemble the ornamental cover to the rear cover of the monitor.

2.6 Power on

Switch on the power to both the monitor and your computer. After the monitor is power on, the LED lights up green or blue.

If the LED becomes red and flashing, please check the video signal cable connection. If the LED is off, please press power

switch slightly.

2.7 Self test pattern

If there is no horizontal or vertical sync signal, your monitor will display Fig 4 to indicate no signal input. After a few

seconds, the monitors will come into waiting and saving power mode; if the monitor receives the video signal, it will return

to the normal mode.

2.8 Adjust the picture

In order to obtain the best visual display, you need to adjust it; please refer to chapter 3 “operation of the monitor”

3. Operation

OSD control panel

Fig 5 is model elevation. Other models differ in key-press position and front panel.

3.1 Power on /off switch

This is a slight touch digital control key. it is used to turn the monitor on or off.

3.2 Power LED indicator

When the monitor is working, the power LED is green or blue. If the monitor is in saving power mode, the power LED will

be red and flashing. If you turn off the monitor, the power LED will be off. When the LED off, the monitor is off; but the

monitor is still electrified. In order to make security, you should unplug the power cord while you don’t use the monitor.

3.3 OSD Control keys

3.3.1 Auto key

This key is used to complete auto-adjusting function, it make the monitor to be the best visual display status only in VGA

mode.

3.3.2 +/- key

These two keys will complete navigate right or left and choose the control of the menu function . The adjustment value can

be set directly by +/- key.

3.3.3 ←key

Confirmation key can show the menu and complete the confirmation function.

3.4 OSD menu

3.4.1 The meaning of the menu in VGA mode ( Fig 6):

1. Auto adjustment 2. Brightness. 3. Contrast 4. H-position 5. V-position

6. Clock 7. Phase 8. Signal source 9. Color adjustment

10. Volume 11. Sharpness 12. OSD position/ transparence 13. Recall

14. Language 15. Exit 16. Selected function name 17. Resolution

18. H-frequency 19. V-frequency 20. Progressive bar of adjustment

21. Percentage of adjustment 22. Customer LOGO 23. OSD display time

3.4.2 The meaning of the menu in DVI mode( Fig.7)

1. Brightness 2. Contrast 3. Sharpness 4. Volume 5. OSD menu display time

6. Transparence 7. OSD position 8. Signal source 9. 9300 K

10. 7800k

11. 6500 K 12.User 13. Recall 14. Language 15. Exit

16. Selected function name

Inhaltsverzeichnis

Andere Prestigio Monitor Handbücher

Prestigio

Prestigio P179 Bedienungsanleitung

Prestigio

Prestigio P151 Bedienungsanleitung

Prestigio

Prestigio P151 Bedienungsanleitung

Prestigio

Prestigio P577 Bedienungsanleitung

Prestigio

Prestigio PDSIK2CA Bedienungsanleitung

Prestigio

Prestigio P7240W Bedienungsanleitung

Prestigio

Prestigio P776 Bedienungsanleitung

Prestigio

Prestigio MultiBoard PMB554S558 Bedienungsanleitung

Prestigio

Prestigio P198 Bedienungsanleitung

Prestigio

Prestigio P179 Bedienungsanleitung

Prestigio

Prestigio P170T Bedienungsanleitung

Prestigio

Prestigio TwinScreen 16 Bedienungsanleitung

Prestigio

Prestigio P178 Bedienungsanleitung

Prestigio

Prestigio P5221W Bedienungsanleitung

Prestigio

Prestigio P1710 Bedienungsanleitung

Prestigio

Prestigio P190T Bedienungsanleitung

Prestigio

Prestigio MultiBoard Bedienungsanleitung

Prestigio

Prestigio P3190W Bedienungsanleitung

Prestigio

Prestigio P179 Bedienungsanleitung

Prestigio

Prestigio P7240WD Bedienungsanleitung

Prestigio

Prestigio P575 Bedienungsanleitung

Prestigio

Prestigio P391 Bedienungsanleitung

Prestigio

Prestigio P575 Bedienungsanleitung

Prestigio

Prestigio P171 Betriebsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung