Primera Server XR Bedienungsanleitung

The Server XR can be configured with the following standard

PC components:

•MicroATX Motherboard

Please note: The remaining component specifications are

greatly dependant upon the specification of this motherboard

•CPU

•CPU Fan

•ATX Power Supply with rear facing fan

•Up to 4 3.5 SATA or IDE Drives

•RAM

Once the Sever XR is fully configured it can be attached to the top of

any XR series Publisher using the instructions below.

1. Remove two posidrive screws securing the top portion of the

XR duplicator cover. Keep the screws. You will need them in a

moment.

2. Locate the mounting hooks on the bottom of the server case.

3. Locate the corresponding mounting holes on the top of the XR

series publisher. Attach the Server by first inserting the hooks

and then carefully tipping the back of the server onto the XR

publisher.

4. Push the server forward until the rear bracket is tight against

the back of the XR publisher. Replace the posidrive screws by

inserting them through the holes in the bracket and into the XR

publisher case.

Thank you for Purchasing the Server XR. The Server XR includes the

pre-installed components shown in the diagram below. To access these

components, remove the cover by unscrewing 7 #1 Posidrive screws

attaching it to the sides and the back. Two screws are located on each

side and three screws are located on the back.

Notes: (1) Although the Posidrive screw looks similar to a Phillips screw it

is not recommended that you use a Phillips screwdriver. The screw-

driver may slip and damage the screw head.

(2) The Server XR occupies 2U in a rackmount installation.

(3) If PCI cards will be installed, low profile PCI cards must be used. Note: The Server XR can also be used as a stand alone device by removing the

mounting hooks and rear support bracket and attaching the included

rubber feet.

Supply Pack: Includes rubber feet,

M3 drive and motherboard mounting

screws, #6-32 power supply screws

and plastic ties. (Taped to the base of

the Server XR.)

Motherboard

Mounting Pegs

PCI Card Slot Covers (4)

LED Light Power Switch

Server Case Fan

3.5" Drive Bracket

(2 drives)

Power Supply Bay

Additional 3.5"

2 drive bracket is

available for

installation here

(Part # 63809)

Rear

Bracket

Mounting Hooks

Mounting Holes

XR-Series

Mission-Critical Disc Publishing Systems

User’s Manual

Printed in the United States of America

P/N 510955 Rev. 062106

Andere Handbücher für Server XR

Andere Primera Disc-Duplikator Handbücher

Primera

Primera CD Color Printer III Bedienungsanleitung

Primera

Primera Server XR Bedienungsanleitung

Primera

Primera Bravo II Bedienungsanleitung

Primera

Primera BravoPro Xi Bedienungsanleitung

Primera

Primera Bravo Pro Bedienungsanleitung

Primera

Primera Bravo II Gebrauchs- und Pflegehandbuch

Primera

Primera Server XR Bedienungsanleitung

Primera

Primera Bravo Bravo Bedienungsanleitung

Primera

Primera Bravo SE Bedienungsanleitung

Primera

Primera Bravo 4202 Bedienungsanleitung

Primera

Primera Disc Publisher SE Bedienungsanleitung

Primera

Primera Autograph Autograph Pro Bedienungsanleitung

Primera

Primera BravoPro autoprinter Bedienungsanleitung

Primera

Primera Max Bedienungsanleitung

Primera

Primera BravoPro autoprinter Bedienungsanleitung

Primera

Primera Bravo II Bedienungsanleitung

Primera

Primera Bravo Pro Bedienungsanleitung

Primera

Primera Bravo II Bedienungsanleitung

Primera

Primera Bravo II Bedienungsanleitung

Primera

Primera Max Bedienungsanleitung

Primera

Primera Bravo Bedienungsanleitung

Primera

Primera Bravo SE Bedienungsanleitung

Primera

Primera DP-XRP Bedienungsanleitung

Primera

Primera DUP-07 Bedienungsanleitung

Beliebte Disc-Duplikator Handbücher anderer Marken

Riso

Riso CV Series Handbuch

MicroBoards Technology

MicroBoards Technology GX-2 Bedienungsanleitung

Addonics Technologies

Addonics Technologies HDUS325DX Bedienungsanleitung

Carry

Carry Pro118 Bedienungsanleitung

CopyPro

CopyPro PowerPro II Bedienungsanleitung

Logicube

Logicube EchoPlus-NG Bedienungsanleitung

Silca

Silca Delta 2000 SA Bedienungsanleitung

Reflex7

Reflex7 Daisy Chain Series Bedienungsanleitung

Vinpower Digital

Vinpower Digital SharkCopier DC Bedienungsanleitung

Codonics

Codonics Virtua E Bedienungsanleitung

Octave

Octave Copy Master II Bedienungsanleitung

Kanguru

Kanguru U2-DVDDUPE-S Bedienungsanleitung

StarTech.com

StarTech.com 8STSATDUP11 Bedienungsanleitung

DUPLO SEIKO CORPORATION

DUPLO SEIKO CORPORATION Duprinter DP-460 Bedienungsanleitung

Addonics Technologies

Addonics Technologies UDFH7 Bedienungsanleitung

Vinpower Digital

Vinpower Digital MiniLoader VDX-1 Bedienungsanleitung

Addonics Technologies

Addonics Technologies CFASTD5 Bedienungsanleitung

MicroBoards Technology

MicroBoards Technology Quic Disc QD-2 Bedienungsanleitung