Primula OCTOPUS Bedienungsanleitung

IRONING PRESSING MACHINERIES –FUSING PRESSES

Instruction Manual

OCTOPUS

Instruction Manual Octopus

TABLE OF CONTEXT

1.ATTENTION!!!..............................................................................................................3

2.Technical Details……………………………………………………………………………………………………..4

2.1 Identification Data……………………………………………………………………………………………….4

2.2 Use of the instruction Manual..................................................................................4

2.3 Technical Characteristics………………………………………………………………………………………5

2.4 Technical Description……………………………………………………………………………………………5

3. General rules and Warnings……………………………………………………………………………………5

3.1 General rules of using the ironing table………………………………………………………………..5

3.2 Warning marks placed on the ironing table………………………………………………………….6

4. Instruction for installation………………………………………………………………………………………6

4.1 Installation……………………………………………………………………………………………………………6

4.2 Connection to power supply………………………………………………………………………………….6

5. Operating instructions ……………………………………………………………………………………………7

5.1Activation instructions…………………………………………………………………………………………..7

5.2 Additional intructions……………………………………………………………………………………………7

5.3 Instructions for transferring Suction and Βlowing air to and from the bucks………….8

6. Maintenance…………………………………………………………………………………………………………. 8

6.1 Maintenance-Cleaning………………………………………………………………………………………….8

6.2 Tips for maintenance and safe check…………………………………………………………………….9

7. Troubleshooting……………………………………………………………………………………………………..9

7.1 Suction does not function………………………………………………………………………………………9

7.2 Blowing does not function…………………………………………………………………………………….9

7.3 Ironing surface Heating system cannot be activated……………………………………………..9

7.4 Ironing buck heating system cannot be activated………………………………………………….9

7.5 During use the device produces loud noise…………………………………………………………….9

Drawing of the spare parts……………………………………………………………………………………….11

List of Spare parts…………………………………………………………………………………………………….10

Wiring Diagram………………………………………………………………………………………………………. 14

Spare parts list of Wiring Diagram……………………………………………………………………………15

TECHNICAL ASSISTANT……………………………………………………………………………………………..16

Instruction Manual Octopus

1. ATTENTION!!!

Please read this instruction manual very carefully before you start using your new Ironing

Table.

The customer by purchasing this product declares that he is fully aware, and accepts everything

mentioned in this operating manual.

Primula SA assumes neither responsibility for any errors herein, nor for incidental nor for

resulting damage in connection with the performance or use of this operating manual.

You may not copy, reproduce, or translate this operating manual, or parts of it, to another

language without prior written consent of Primula SA

Any information in this manual may be subject to change without any prior notice.

CAUTION! PLEASE READ CAREFULLY THE INSTRUCTION MANUAL BEFORE INSTALLING THE

IRONING TABLE!!!

3nd edition –March 2018

Company name: Primula S.A

Address: 14th km Thessaloniki –Kilkis,

57200 Liti, Thessaloniki, Greece

Industry: Ironing Equipment

Telephone: +30 23940 71215

Fax: +30 23940 71438

Web: www.primula.gr

E-mail: [email protected]

Instruction Manual Octopus

2. Technical Details

2.1Identification Data

The Ironing Table, that you have purchased, is a machine of high advanced technology with

many advantages, unique in its kind. It is manufactured according to International and

European safety standards by a company with experience, since 1969, in this sector.

Congratulations for your choice!

Regarding its characteristics, the Ironing Table includes a serial number plate (see below)

where all its specifications are displayed. Every warning and symbol that is placed on the

Ironing Table is in accordance with the specifications of the European standards.

The serial number plate has been placed in a visible place on the Ironing Table and is made

from fadeless material.

Amongst others, the Serial Number plate displays the following:

•Company Logo

•Manufacturer Information

•Model

•Serial Number

•Rated Voltage of Use

•Rated Frequency of Use

•Year of manufacturing

•Accumulated Installed Wattage

Picture 1: Serial Number Plate

2.2 Use of the Instruction Manual

The correct assembly and adjustment of the machine is vital to the safety of the user and the

machine‘s life span. For this reason, the installation, alteration, replacement or extension of

the machine should only be performed by qualified personnel.

Under no circumstances is interventions allowed in the machine, unless it’s for the planned

maintenance by an unauthorized engineer.

Instruction Manual Octopus

If you remain uncertain regarding the correct assembly of the machine even after reading the

instructions, contact the manufacturer or an authorized representative before starting the

operation of the machine.

2.3Technical Characteristics

Compact Ironing Table

The solution that the smaller garment manufacturers have been looking for. The Octopus gives

you the flexibility of mounting up to five different bucks on it and work on them simultaneously,

thus receiving a professional finish to jackets and trousers without having to invest in separate

pressing equipment.

Primula S.A. can provide a wide variety to bucks to suit each customers' individual needs and

transform the Octopus to a specialized table, whether it is for finishing, opening seams or

underpressing.

2.4Technical Description

Model

OCTOPUS

Working Surface

135X65cm

Height adjustment

75-90cm through amortisseur

Heating

1KW

Suction

Adjustable

Blowing

0.75HP (OPTIONAL)

Motor Power

0.75HP

Pedal voltage

24V-DC

Power supply

400V-3ph-50Hz/60Hz

3. General rules and Warnings

3.1 General rules of using the ironing table

For the safe usage of your ironing table, please read the following operating instructions

carefully, as listed below:

•Install, use and maintain the ironing table according to the instructions in this manual.

Otherwise, the manufacturer has no responsibility for the possible failed operation or

safety.

•Before connecting the power supply, check that the voltage corresponds to the voltage

indicated on the technical specifications.

•Connect the machine only to a power supply that meets the minimum required

frequency and is properly grounded. Do not leave the ironing table while it is operating

and is on power without supervision.

•Use the ironing table ONLY for the intended purpose in accordance with the current

instruction manual and only with the accessories that are provided or that are intended

for this specific ironing table. The manufacturer is not liable for any damages resulting

from misuse or wrong use of the ironing table.

•DO NOT touch the power supply with wet hands.

•Do not clean the ironing table with corrosive or other damaging materials/chemicals.

Instruction Manual Octopus

•Never use the ironing table to support any other machine or structure.

•It is strictly prohibited to do any kind of welding or alterations on the ironing table or

its parts.

•It is strictly prohibited to remove any protective device/guards.

•It is strictly prohibited to intervene in the control units/circuit boards of the Ironing

Table.

•It is strictly forbidden to do any modification to the technical specifications of the

machine (electrical or mechanical) by third persons.

•Please contact your dealer or the manufacturer for any malfunction or further

information requests

3.2 Warning marks placed on the ironing table

The following attention marks are placed on each ironing table:

The operator of the system has the obligation to inform himself regarding the dangers which

may occur during usage, so that he/she can avoid them or minimize their occurrence as best

as he/she is able to.

4. Instructions for installation

4.1 Installation

Put the ironing table in the designated area of your choice and align the machine by

increasing/decreasing the height of its feet No 14 (see the drawing of spare parts on page

10). Make sure that the ironing table is stable and the ironing surface flat.

4.2 Connection to Power Supply

For the electrical connection and above all for the power supply, please follow carefully the

instructions of the electric diagram (enclosed) as well the warning signs symbols attached on

the machine. In case you have purchased a single phase machine 230V, connect the machine

onto a schuko socket 230V/16A. The connection should be done with a tripolar cable 3Χ1,5

mm (1 phase, 1 neutral, 1 grounded). The power should be provided with a fuse 16Α. If the

machine is 400V/3 phase, the connection should be made to a 5-poles cable 5Χ1,5 mm (3

Instruction Manual Octopus

phase, 1 neutral, 1 grounding). The power should be secured with a tripolar circuit breaker

(3Χ10Α).

For any device that is connected to a 3-phased current, make sure that the rotation of the

motor is done clockwise.

CAUTION! For your own safety, pay attention to all the warning labels (yellow colored) that

are placed on the machine. The manufacturer bears no liability for any damages or accidents

due to faulty supplying network or to not specified personnel.

5. Operating instructions

For the instructions mentioned in the current section please see the below

images (picture 4 & picture 5).

5.1Activation Instructions

•Turn on the main switch No 1

•Turn on the switch No 2 to activate the suction.

•Turn on the switch No 3 to activate the heating on the ironing

surface.

•Switch the thermostat that is placed below the buck to temperature

110°C during the winter and to 90°C during the summer.

•Turn on the switch No 4 to activate the heating of the ironing bucks.

•Whenever you want to activate the suction, step lightly on the foot pedal.

•Adjust the intensity of the suction through the lever No 5, which

is located on the chimney. Adjust it from 0% - 100% depending

on the fabric (weight, quality etc.).

•Adjust the amount of steam from the steam generator in

proportion to the intensity of the suction to avoid the

liquidification of the steam on the ironing surface. Thinner

fabric requires smaller amounts of steam, while thicker fabric

requires larger amounts.

5.2 Additional Instructions

* In case your table disposes a blowing system of air (optional):

•Adjust the pressure of the blowing depending on the fabric

(weight, quality etc.) from the lever No 6 located beneath the

ironing surface.

•To activate the blowing, step lightly on the foot pedal.

**In case the table disposes a Vario iron system (optional):

•Hook the steam iron from the balancer and adjust the distance of the steam iron from

the working surface (approximately 5cm). After you have finished ironing, unhook the

steam iron from the balancer and put it on the iron rest mat.

Picture 4:

Switches

Instruction Manual Octopus

5.3 Instructions for transferring Suction and Blowing air to and from the bucks

A) If you want to interchange the suction/blowing air from the ironing surface to the bucks

that are situated on the back side of the ironing table, you can pull the buck over the

ironing surface. The suction/blowing air automatically will be interchanged from the

ironing surface to the bucks and vice versa.

B) If you want to interchange the suction/blowing air from the ironing surface to the bucks

that are situated in the front side of the ironing table, you can push the lever No 08 (see

picture 5) which is located under the working surface. The suction/blowing air

automatically will be interchanged from the ironing surface to the bucks and vice versa.

For each individual buck that you want to use, you must align the arrows (see picture 5) of the

each buck with the arrow of the buck holder so that the suction/blowing function can be

transferred to the chosen buck.

6. Maintenance

6.1 Maintenance-Cleaning

Before cleaning/checking/maintaining the ironing table, ensure that it is not connected to any

power supply source and is not warm after usage. The processes of cleaning and maintenance

must be taken place frequently and it is vital for the correct, safe and long-term operation of

the ironing table.

For the correct operation of the ironing table over time you need to:

•Keep the covers of the board and the bucks clean, in order to have high suction and

blowing performance. Wash the blue polyester fabric cover once a month in the

washing machine (30-40°C).

•Replace the covers and the foams frequently for high suction and blowing performance.

•Remove any fuzz by dusting or cleaning the impeller at least 2-3 times a year.

•Clean and lubricate periodically the ball bearing of the swivel arms and the bucks of the

ironing table.

•Clean periodically the inner parts of the ironing table, as well as the circuit board, using

compressed air.

Picture 5: Images for transferring suction/blowing to and from the bucks

Instruction Manual Octopus

6.2 Tips for maintenance and safe control

The manufacturing company suggests:

•Quick daily optical control of the ironing table (locate loose wires etc.) and an optical

control of each part inside the ironing table every 3 month.

In case of a fault or need of repair/maintenance of the whole or part of the ironing table, please

contact the manufacturer or an authorized representative.

7. Troubleshooting

For the instructions mentioned in the current section please see the drawing of the spare parts

of the machine on page 10.

7.1 The vacuum does not function properly

•Check if there is sufficient power supply.

•Check if the power supply cable No 33 has for some reason cut off.

•Check the circuit breaker F3 2.5A located inside the circuit board.

•Check if the pedal button is for some reason faulty.

•Check if motor No 01 is for some reason damaged.

•Check the relay No 36.

•Check electric board No 37.

7.2The blowing of air does not function

•Check if the pedal button No 15 is for any reason is damaged.

•Check electric board No 37.

•Check the relay No 36.

•Check the motor No 1.

7.3 The heating of the working surface is not activated

•Check if the safety thermostat No 75 is defective. Replace it.

•Check if the thermostat No 76 is defective. Replace it.

•Check if the electrical impedance No 116 is burned out. Replace it.

•Check if the switch No 50 is faulty. Replace it.

•Check the power supply cable and power plug on the board surface (No 71).

7.4 Ironing buck heating system cannot be activated

•Check the power supply cable and power plug on the buck.

•Check the heating switch No 51 of the buck.

•Check the electrical impedance of the buck.

7.5 During use the device produces loud noise

•Check if the motor bearings have been outworn. Replace them.

•Check the impeller to ensure there is no dust or fuzz that could cause its vibration.

Instruction Manual Octopus

Drawing of the spare parts

Inhaltsverzeichnis

Andere Primula Elektrowerkzeuge Handbücher

Primula

Primula Eco FL Bedienungsanleitung

Beliebte Elektrowerkzeuge Handbücher anderer Marken

AEG

AEG OMNI-JS Bedienungsanleitung

SIP

SIP 01533 Bedienungsanleitung

Ribimex

Ribimex PRS499 Bedienungsanleitung

3M Fiber Optic Connector Crimp Tool Bedienungsanleitung

Ryobi

Ryobi P524 Bedienungsanleitung

ROJEK

ROJEK FSN 300A Bedienungsanleitung

Kemper

Kemper 1740PRO Bedienungsanleitung

WABCO

WABCO OptiTire Bedienungsanleitung

EINHELL

EINHELL TE-MS 18/210 Li Bedienungsanleitung

Orgapack

Orgapack OR-T 85 Kurzanleitung

TOUGHCUT

TOUGHCUT Diamond 400 Bedienungsanleitung

Yaros

Yaros PB-3603 Bedienungsanleitung

Fein

Fein BSS 2.0 E Einrichtungshandbuch

Baileigh Industrial

Baileigh Industrial SS-2725 Bedienungsanleitung

Milwaukee

Milwaukee 2674-20 Bedienungsanleitung

Fein

Fein BLs 1.6 Bedienungsanleitung

Princess

Princess Electric Multi Sharpener Bedienungsanleitung

FOREDOM

FOREDOM K.1050 Handbuch