Pro-Elec PEL00935 Bedienungsanleitung
1
LED Floodlight with PIR
Models: PEL00935, PEL00936, PEL00937
& PEL00938
Please read these instructions carefully before use and retain for future
reference.
This oodlights must be installed by a qualied electrician in accordance with current
building and IET wiring regulations (BS7671).
IMPORTANT SAFETY INFORMATION
• Do not use PVC cable to connect this oodlight to your wiring supply. Rubberised
cable (type H05RN-F), with three conductors of at least 1.0mm² cross-sectional
area must be used. This product must be connected to Earth.
• The front of this oodlight is made of tempered glass, replace if cracked.
• LED lamps are extremely bright. To avoid possible damage to the eyes, do not
stare into an LED beam.
• In use, avoid touching any external surface of the oodlight, due to the possibility
of high temperatures.
• Do not use near ammable materials.
• The oodlight must be positioned so that there is at least 1m between the front of
the work light and the surface to be illuminated.
• The oodlight has an IP rating of IP44.
• It is suitable for use in an ambient temperature between -30°C and +45°C.
2
The oodlight has a beam angle of 120°. It can be tilted upwards and downwards at an
angle of approximately 90°. The angle of adjustment will vary slightly between models.
INSTALLATION
The oodlight is suitable for connection to a 220-240V, 50Hz earthed supply. It is
designed for permanent connection to xed wiring, which must be a suitable circuit
protected by an RCD with an operating current not exceeding 30mA and an MCB or
fuse of the correct rating.
Mounting the Floodlight
• Before commencing installation, check that you have all of the tools you need.
• Check that the oodlight is not damaged. If there is any damage, return it to the
place of purchase. Do not attempt to repair it yourself.
• Choose your location to x the oodlight, taking into account the guidance above.
• Use the oodlight bracket to mark the position of the xing holes.
• Drill the xing holes and x the oodlight into position using appropriate size
screws and wall plugs (not provided). Check that it is securely xed.
POSITIONING
• This oodlight is suitable for outdoor lighting applications, for domestic use only.
• Do not use in areas where an explosive or chemical atmosphere may exist. Do not
use in areas where ventilation is restricted.
• It is suitable for mounting on plasterboard, wood or masonry surfaces. Highly
ammable surfaces such as plastic or polystyrene must not be used.
• Do not install on damp or conductive surfaces such as metal. It should be placed
away from any ammable materials.
• Before drilling any xing holes, check that there are no hidden obstructions behind
the mounting surface such as pipes or cables.
• The recommended height for installation of the oodlight is between 0.5 and 3
metres.
• Ensure that there is space around the oodlight to allow adequate circulation of air.
• Orientation of the oodlight is important as shown below:
3
OPERATION
Wiring the Floodlight
• Ensure that the mains supply is isolated before commencing installation.
• A suitable rated connector must be used to connect the lead from the oodlight to
the mains supply.
• Connect the mains cable to the connector. Ensure that the correct polarities for
Live, Neutral and Earth are observed i.e.
- Green/yellow - Earth terminal
- Brown - Live terminal
- Blue - Neutral terminal
• After wiring, check that there are no stray strands and that all the wires have been
correctly installed.
• Before connecting power, perform the electrical tests specied in the current
Building and IET Wiring Regulation to ensure that the installation is safe and that
the wiring has been performed correctly.
• Restore the mains power supply and check that the oodlight illuminates the
required area. Tighten the oodlight using the bolts on the brackets.
Time Sens Lux
• Adjusting the PIR Sensor
• There are three adjustments on the back of the PIR sensor, one adjusts the
duration the oodlight remain lit, the second one is for the sensitivity of movement
detection and the third is to set the level of ambient light before the sensor triggers
the illumination. Some trial and error may be required to set these correctly.
• Adjust the light level so the oodlight doesn’t activate until the light level is low
enough for oodlighting to be required.
• Adjust the timer setting for the required duration you require for the oodlight to
remain illuminated.
CLEANING & MAINTENANCE
• Clean the oodlight only with a soft dry cloth. Do not use any chemicals, abrasives
or solvents that could damage the oodlight.
• The oodlight has a sealed LED lamp and is maintenance free. The LED lamp
cannot be replaced. When the LED lamp reaches the end of its life, the oodlight
will have to be replaced.
4
SPECIFICATION
PEL00935 PEL00936 PEL00937 PEL00938
Input Voltage 85-260V AC 50/60Hz
Nominal luminous ux 750lm 1500lm 2250lm 3750lm
Wattage 10W 20W 30W 50W
Beam angle 120° 120° 120° 120°
Dimmable No
Nominal lifetime of the lamp
20,000h 20,000h 20,000h 20,000h
Number of switching
cycles 15,000 15,000 15,000 15,000
Colour temperature 6000K 6000K 6000K 6000K
Colour rendering (CRI Ra)
≥80 ≥80 ≥80 ≥80
Warm up time (60% full light)
Instant full light
Ingress rating IP44
Dimensions (mm)
180 x 140 x 105
224 x 185 x 106
289 x 237 x 125
289 x 237 x 125
Weight 0.317kg 0.438kg 0.632kg 1.072kg
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF
ELECTRICAL & ELECTRONIC EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste Electrical & Electronic
Equipment (WEEE). Any WEEE marked products must not be mixed with general household waste,
but kept separate for the treatment, recovery and recycling of the materials used. Contact your local
authority for details of recycling schemes in your area.
Made in China. PR2 9PP
Man Rev 1.2
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Andere Pro-Elec Scheinwerfer Handbücher
Pro-Elec
Pro-Elec PEL00416 Bedienungsanleitung
Pro-Elec
Pro-Elec PELL0348 Bedienungsanleitung
Pro-Elec
Pro-Elec PELL0290 Bedienungsanleitung
Pro-Elec
Pro-Elec PEL00547 Bedienungsanleitung
Pro-Elec
Pro-Elec PELL0357 Bedienungsanleitung
Pro-Elec
Pro-Elec PELL0365 Bedienungsanleitung
Pro-Elec
Pro-Elec PEL00930 Bedienungsanleitung
Pro-Elec
Pro-Elec PELL0283 Bedienungsanleitung
Pro-Elec
Pro-Elec PEL00500 Bedienungsanleitung
Pro-Elec
Pro-Elec PELL0295 Bedienungsanleitung
Pro-Elec
Pro-Elec LP07816 Bedienungsanleitung
Pro-Elec
Pro-Elec PELL0278 Bedienungsanleitung
Pro-Elec
Pro-Elec SR09941 Bedienungsanleitung
Pro-Elec
Pro-Elec PEL01012 Bedienungsanleitung
Pro-Elec
Pro-Elec PEL01347 Bedienungsanleitung
Pro-Elec
Pro-Elec PELL0352 Bedienungsanleitung
Pro-Elec
Pro-Elec PELL0273 Bedienungsanleitung
Pro-Elec
Pro-Elec SR09944 Bedienungsanleitung
Pro-Elec
Pro-Elec PEL01343 Bedienungsanleitung
Pro-Elec
Pro-Elec PEL00934 Bedienungsanleitung
Beliebte Scheinwerfer Handbücher anderer Marken
VIZULO
VIZULO Micro Martin Benutzerhandbuch
EuroLite
EuroLite LED IP FL-100 SMD Bedienungsanleitung
Cooper Wheelock
Cooper Wheelock XB12 Bedienungsanleitung
Allen + Roth
Allen + Roth 17624-000 Bedienungsanleitung
ADJ
ADJ 4 STAGE PAK Bedienungsanleitung
Cooper Lighting
Cooper Lighting EGL91SW233 Bedienungsanleitung
