pro master COMPACT STUDIO FLASH TRIGGER Bedienungsanleitung
Thank you for your purchase of the PROMASTER COMPACT STUDIO FLASH TRIGGER. The ProMaster Compact
Studio Flash Trigger is a perfect addition to any studio flash system. The compact design plugs directly into the sync
port on your studio flash. The 8 channel, 2.4ghz trigger is engineered to reduce interference providing the maximum
reliability both indoors and out.
FEATURES
- Works with any studio flash with a standard sync port
- Flash sync speeds up to 1/250th second
- Operates on 2.4ghz frequency to minimize RF interference
- 8 operating channels helps achieve the most reliable operation and allows for the use of multiple triggers in the same
shooting set up
- Trigger uses hot shoe or PC cord for maximum compatibility
OPERATION
1. Transmitter Indicator Light
2. Test Button
3. Transmitter Battery Compartment
4. Transmitter Hot Shoe Foot
5. Hot Shoe Contacts
6. Transmitter Channel Selection Switch
7. PC Sync Line Jack
8. Receiver Output Plug
9. Receiver Channel Selection Switch
10. Receiver Indicator Light
11. Power Switch
12. Receiver Battery Compartment
13. Mini Plug Adapter
14. PC Sync Cord
1. Open the battery cover of the receiver (12). Insert two AAA batteries. Be sure to observe the correct polarity.
Replace the cover. Open the battery cover of the transmitter (3). Insert one CR2 battery. Be sure to observe the
correct polarity. Replace the cover on the transmitter.
2. Select a channel by setting switches on the receiver using the Receiver Channel Selection Switch (9). Set the
transmitter switches to the same position using the Transmitter Channel Selection Switch (6). Turn on the power to
the receiver using the Power Switch (11). The Receiver Indicator Light (10) will blink. Test your connection by
pressing and holding the Test Button (2). The Receiver Indicator Light (10) should remain lit while you are holding
down the test button confirming the connection.
If the Signal Indicator Light does not remain lit while holding down the Test Button, check to insure that the
Channel Selection Switches on both the Transmitter and Receiver are set to the same position. If during use you
encounter misfires, it may be due to interference from other electrical objects. Change your unit to a different
channel by selecting a different combination on the Receiver and Transmitter Channel Selection Switch.
3. Insert the transmitter Hot Shoe Foot (4) into the hot shoe on your camera. If your camera does not have a hot
shoe, you can connect the transmitter to your camera using the PC Synch Cord.
4. Plug the receiver into the synch cord port of your studio flash. Note: Depending on your studio flash, this may
require the use of the MINI PLUG ADAPTER (13).
5. Turn on the receiver and your flash. Press the Test Button on the transmitter to confirm operation.
Important Notes
•Be sure to use fresh batteries. Weak batteries will reduce the effective operating range of the trigger.
•Do not leave or store in temperatures that exceed 40ºC. This could adversely affect the internal structure or
performance of the unit. Remove the battery pack and store it separately if you do not intend to use the trigger
for a long period of time.
•This unit is not water-resistant. Rain and humid weather may cause irreparable damage.
•This unit is composed of very delicate electronic parts. Be sure to protect it against shock, impact or other
improper handling.
•Do not try to open the housing or repair the unit. There are no user serviceable parts and improper handling
could cause serious injury.
•Do not clean the surface of the light with any petroleum solvent, detergent solution or other strong solvents.
These solvents may cause damage to the light.
SPECIFICATIONS
• Transmitter Power Source: 12V 23A
• Receiver Power Source: AAA x2
• Outdoor operating distance (open area): >100 ft/30 m
• Indoor operating distance: > 32 ft/10 m
• Available Operating Channels: 8
• Operating Frequency: FM 2.4Ghz
• Maximum Synch Speed: 1/250th second depending on flash/camera combination
ONE YEAR UNCONDITIONAL GUARANTEE
If for any reason, this ProMaster product fails within ONE YEAR of the date of purchase, return this product to your
ProMaster dealer and it will be exchanged for you at no charge.
ProMaster products are guaranteed for ONE FULL YEAR against defects in workmanship and materials. If at any time
after one year, your ProMaster product fails under normal use, we invite you to return it to ProMaster for evaluation.
Code 9525
Made in China
www.promaster.com
Fairfield, CT 06825
Inhaltsverzeichnis
Andere pro master Kamerazubehör Handbücher
pro master
pro master 9217 Bedienungsanleitung
pro master
pro master SystemPRO ProfessionalRemote + Shutter... Bedienungsanleitung
pro master
pro master HGX PRIME Bedienungsanleitung
pro master
pro master CT75K Bedienungsanleitung
pro master
pro master CHRONICLE Bedienungsanleitung
pro master
pro master 6942 Bedienungsanleitung
pro master
pro master POWERHOUSE NP-F980PD Bedienungsanleitung
pro master
pro master ST1 Bedienungsanleitung
pro master
pro master 3711 Bedienungsanleitung
pro master
pro master VL306 Bedienungsanleitung
pro master
pro master LED30 Bedienungsanleitung
pro master
pro master 3669 Bedienungsanleitung
pro master
pro master CHROMA Series Bedienungsanleitung
pro master
pro master 8006 Bedienungsanleitung
pro master
pro master US1014RGB Bedienungsanleitung
pro master
pro master GH11 Bedienungsanleitung
pro master
pro master LED80VT Bedienungsanleitung
pro master
pro master Rain Jacket Bedienungsanleitung
pro master
pro master 3648 Bedienungsanleitung
pro master
pro master SM300 Bedienungsanleitung
