PRO SIGNAL PSG3424 Bedienungsanleitung

4K 30Hz SDR 10M WIRELESS HDMI EXTENDER

PSG3424

IMPORTANT SAFETY INFORMATION

Please read these instructions carefully before use and retain for future reference.

When using electrical appliances basic safety precautions should always be followed.

To prevent re or shock hazard, do not expose this product to rain or moisture.

• Check that the power supply matches the mains voltage.

• Only use the power supply provided or one of identical specication.

• Beware of static electricity which may damage the device. Use ESD precautions

when installing.

• Do not plug or unplug cables while the devices are powered on.

WHAT'S INCLUDED

• HDMI Transmitter and Receiver

• 2 x Power Adapter 230VAC to 5VDC 1A

• Operation Manual

• 60GHz Wireless Extender with zero transmission latency.

• Range up to 1080p @ 30 meters. 10 meters 4K 30Hz SDR.

• Low power consumption.

• Uncompressed transmission, zero latency.

• Support CEC pass through.

• Maximum 30M visible “line of sight” transmission range @ 1080p 60Hz.

• Maximum supported resolution is up to 4K@30Hz standard dynamic range (SDR).

• Supports Dolby, TrueHD, DTS-HD Master Audio and LPCM digital audio streams up

to 7.1 channels audio.

• Supports point to point (Max 2 kits within a room), and 2 to 1 conguration.

• HDMI Wireless “Line of sight “transmission with zero latency.

• The transmitter and receiver can be used to transmit high denition video and audio

to any HDTV display in the same room or area up to 30 meters away without any

transmission delay.

• This product supports resolutions up to 4K@30Hz (3840x2160@30Hz SDR), 1080p

3D, CEC, and 7.1-channels of High Bit Rate (HBR) lossless digital audio such as

Dolby TrueHD, DTS-HD Master Audio.

• Zero signal compression and zero latency, supports point to point conguration,

and 2 to 1 conguration.

IMPORTANT NOTE: This 60GHz wireless extender is intended to be used in the same

room or area. To get the best transmission range both the transmitter and receiver

units must have full line of sight of each other. The 60GHz wireless signals will not pass

through walls, ceilings or oors.

To get the best performance and resolution, position the receiver and transmitter

where no xed or moving obstacles can interrupt the line of sight between the Wireless

transmitter and receiver.

OVERVIEW

FEATURES

Receiver

1. Power input Connect with PSU.

2. HDMI input Connect with HDMI source device.

3 Micro USB Connect to the source device USB port (optional).

4. Transmission LED Slow ash LED indicates the unit has started radio

transmission and has not yet found the receiver, transmitter

is in scan mode, searching for a matching receiver.

Fast ash LED indicates the transmitter and receiver have

been connected well with each other;

LED solid on means the transmitter and receiver have

established an audio or video connection, transmission in

operation.

5. Power LED Illuminates when the power is switched on.

6. Reset button Long press (>10 seconds): set to factory default

When the button is short pressed on the receiver if other

transmitter sources are available in its network, the receiver

will give up the change connection to the next available

source

Transmitter

1. Power input Connect with PSU.

2. HDMI input Connect with HDMI source device.

3 Micro USB Connect to the source device USB port (optional).

4. Transmission LED Slow ash LED indicates the unit has started radio

transmission and has not yet found the receiver, transmitter

is in scan mode, searching for a matching receiver.

Fast ash LED indicates the transmitter and receiver have

been connected well with each other;

LED solid on means the transmitter and receiver have

established an audio or video connection, transmission in

operation.

5. Power LED Illuminates when the power is switched on.

6. Reset button Restores the device to factory setting.

INSTALLATION

• Connect the transmitter HDMI input to the HDMI source device. Connect the

receiver HDMI output with HDMI display device.

• Connect the power supplies to both transmitter and receiver and plug into the mains

and turn on the power.

• Face the transmitter and receiver directly towards each other for maximum

transmission range and best picture and sound performance.

• In the event of a no picture or sound symptom rstly check that the correct HDMI

input is selected on the display device and also check/change the HDMI output

resolution on the source device, it must not be set to higher than 4K@30Hz. Also

verify that HDR (high Dynamic Range is turned off).

NOTE: If uninterrupted direct line of sight is not possible then transmission range can be

signicantly reduced, also local environmental factors may also affect the transmission

range and the best resolution. This also includes moving objects, people or animals

walking in front of the transmitter or receiver or electrical interference.

2. Two to one connection

1. Point to point connection

Voltage/Current DC 5V/1A

Power consumption TX: <2.5W RX: <2.5W

HDMI compliance HDMI 1.4

HDCP compliance HDCP 2.2

HDMI resolution 80i@60Hz, 480p@60Hz, 576i@50Hz. 576p@50Hz.

720p@50/60Hz. 1080i@50/60Hz. 1080p@50/60Hz

1080p@50/60Hz/120Hz, 3840x2160@24/30Hz

Audio formats supported CH 7.1/LPCM/DTS-HD/Dolby-AC3

Maximum transfer rate 10.2Gbps

Input and output TMDS

signal

0.7~1.2Vp-p(TMDS)

Input and output DDC

signal

5Vp-p(TTL)

Transmission method 60GHz wireless

Max Transmission range Line of sight operation only 4K 30Hz SDR 10m

Lower resolutions; range will be higher - max 30m

Latency Zero

Working temperature 0~40°C

Storage temperature -20~70°C

Humidity 0~90%RH (no condensation)

Dimension 79.8(W) x 45.7(D) x 54.0(H)mm

Material Alloy

Weight TX: 120g RX: 120g

SPECIFICATIONS

INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF ELECTRICAL &

ELECTRONIC EQUIPMENT.

When this product has reached the end of its life it must be treated as Waste Electrical

& Electronic Equipment (WEEE). Any WEEE marked products must not be mixed with

general household waste, but kept separate for the treatment, recovery and recycling

of the materials used. Contact your local authority for details of recycling schemes in

your area.

Made in China. PR2 9PP

Man Rev 1.1

CLEANING & MAINTENANCE

Clean the outside casing with a soft cloth lightly moistened with mild soap and water.

Never use any abrasive or solvents.

Inhaltsverzeichnis

Andere PRO SIGNAL Extender Handbücher

PRO SIGNAL

PRO SIGNAL PSG3426 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG03186 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3077 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3533 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3424 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3084 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG08050 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3083 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3453 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG03185 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3082 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3443 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3425 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3455 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3454 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3447 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3456 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3451 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3427 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3079 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3081 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3078 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3080 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG03502 Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung