PRO SIGNAL PSG3443 Bedienungsanleitung
1
4Kx2K 60Hz HDMI EXTENDER
PSG3443
2
IMPORTANT SAFETY INFORMATION
Please read these instructions carefully before use and retain for future reference.
When using electrical appliances basic safety precautions should always be followed.
• To prevent re or shock hazard, do not expose this product to rain or moisture.
• Check that the power supply matches the mains voltage.
• Only use the power supply provided or one of identical specication.
• Ensure the IR remote extender cables are connected to the correct devices.
• Beware of static electricity which may damage the device. Use ESD precautions
when installing.
• Do not plug or unplug cables while the devices are powered on.
WHAT'S INCLUDED
• HDMI Extender and Receiver
• Power Adapter 230VAC to 5VDC 2A
• Operation Manual
• IR remote extender
• IR remote receiver
• Based on HDbitT technology for a more stable performance.
• Supports full 4K x 2K@60Hz Ultra HD.
• Supports 1 to 1 and 1 to many.
• Transmission up to 120 metres.
• HDMI 2.0 and HDCP 2.2 compliant.
FEATURES
CAT CABLE REQUIREMENT
Follow the standard of IEEE-568B, It is recommended to select a high quality network
cable with less loss and crosstalk.
1 orange/white
2 orange
3 Green/white
4 Blue
5 Blue/white
6 Green
7 Brown/white
8 Brown
• This HDMI Extender allows a signal over a CAT5/6 up to 120 metres
(150metres on HQ CAT6).
• IR passback with 20-60KHz frequency to control source device.
• Interconnect with other HDbiT VGA/SDI/DVI transmission via CAT5/6.
OVERVIEW
3
INSTALLATION
TRANSMITTER
1. HDMI input - connect with source device.
2. IR extender emitter connection
3. Reset button - press to reset the device.
4. Power LED - illuminates when power is on.
5. Power input - connect to PSU 5VDC output jack.
6. Data transmission LED - ashes when transmitting signal.
7. Connection indicator LED - illuminates to indicate connection to receiver is good.
8. CAT network cable RJ45 socket.
4
RECEIVER
1. HDMI output - connect with destination device.
2. IR extender receiver connection
3. Reset button - press to reset the device.
4. Power LED - illuminates when power is on.
5. Power input - connect to PSU 5VDC output jack.
6. Data transmission LED - ashes when transmitting signal.
7. Connection indicator LED - illuminates to indicate connection to receiver is good.
8. CAT network cable RJ45 socket.
5
IR User Guide:
• IR receiver extension cable should be connected to the IR IN port of the receiver.
• The IR emitter extension cable should be connected to the IR OUT port of the
transmitter.
• The emitter of the IR extension cable should face as close as possible to the IR
receiving window of the source device.
• Face the receiving head of the IR receiver extension cable toward the user for
unobstructed line of sight to the remote control.
• The IR receiver detects the users remote control and transmits the signal down the
network cable to the IR emitter which replicates the IR output to control the source
device.
OPERATION
6
• One to one connection with IR remote up to 150 metres over HQ CAT6 cable.
• One to many connection using router/switch over HQ CAT6 cable.
7
SPECIFICATIONS
Voltage/Current DC 5V 2A
Power consumption TX: <8W RX: <10W
HDMI compliance HDMI 2.0
HDCP compliance HDCP 2.2
HDMI input resolution 480i@60Hz, 480p@60Hz, 576i@50Hz, 576i@50Hz,
576p@50Hz, 720p@50/60Hz, 1080i@50/60Hz,
1080p@50/60Hz, 4Kx2K@24/25/30/60Hz
HDMI output resolution 1080p@60Hz, 4Kx2K@30/60Hz
Audio formats L & R Stereo Audio
Max transfer rate 18Gbps
Input/output TMDS signal 0.7~1.5Vp-p (TDMS)
Input/output DDC signal 5Vp-p (TTL)
Transmission length CAT5 80m / CAT5E 100m / CAT6 120m
Input/output cable length <5m (AWG24)
IR remote control Supports IR passback with 20-60KHz frequency
Transfer method Over UTP/STP CAT5/5e/6 delay <200ms
Connector RJ45
Working temperature 0~50°C
Storage temperature -10~ 70°C
Humidity 0~90%RH (no condensation)
Dimension (RX & TX) 103(W) x 97.5(D) x 24.8(H)mm
Material Alloy
Weight 420g total
CLEANING & MAINTENANCE
Clean the outside casing with a soft cloth lightly moistened with mild soap and water.
Never use any abrasive or solvents.
8
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF ELECTRICAL &
ELECTRONIC EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste Electrical
& Electronic Equipment (WEEE). Any WEEE marked products must not be mixed with
general household waste, but kept separate for the treatment, recovery and recycling
of the materials used. Contact your local authority for details of recycling schemes in
your area.
Made in China. PR2 9PP
Man Rev 1.1
Inhaltsverzeichnis
Andere PRO SIGNAL Extender Handbücher
PRO SIGNAL
PRO SIGNAL PSG3082 Bedienungsanleitung
PRO SIGNAL
PRO SIGNAL PSG3077 Bedienungsanleitung
PRO SIGNAL
PRO SIGNAL PSG3444 Bedienungsanleitung
PRO SIGNAL
PRO SIGNAL PSG3455 Bedienungsanleitung
PRO SIGNAL
PRO SIGNAL PSG3084 Bedienungsanleitung
PRO SIGNAL
PRO SIGNAL PSG08405 Bedienungsanleitung
PRO SIGNAL
PRO SIGNAL PSG3453 Bedienungsanleitung
PRO SIGNAL
PRO SIGNAL PSG3451 Bedienungsanleitung
PRO SIGNAL
PRO SIGNAL PSG3447 Bedienungsanleitung
PRO SIGNAL
PRO SIGNAL PSG03186 Bedienungsanleitung
PRO SIGNAL
PRO SIGNAL PSG3456 Bedienungsanleitung
PRO SIGNAL
PRO SIGNAL PSG3080 Bedienungsanleitung
PRO SIGNAL
PRO SIGNAL PSG03185 Bedienungsanleitung
PRO SIGNAL
PRO SIGNAL PSG3425 Bedienungsanleitung
PRO SIGNAL
PRO SIGNAL PSG3533 Bedienungsanleitung
PRO SIGNAL
PRO SIGNAL PSG3424 Bedienungsanleitung
PRO SIGNAL
PRO SIGNAL PSG3308 Bedienungsanleitung
PRO SIGNAL
PRO SIGNAL PSG3454 Bedienungsanleitung
PRO SIGNAL
PRO SIGNAL PSG3426 Bedienungsanleitung
PRO SIGNAL
PRO SIGNAL PSG08050 Bedienungsanleitung
