PRO SIGNAL PSG3428 Bedienungsanleitung

1080P HDMI EXTENDER SPLITTER 120M

PSG3428

IMPORTANT SAFETY INFORMATION

Please read these instructions carefully before use and retain for future reference.

When using electrical appliances basic safety precautions should always be followed.

• To prevent re or shock hazard, do not expose this product to rain or moisture.

• Check that the power supply matches the mains voltage.

• Only use the power supply provided or one of identical specication.

• Ensure the IR remote extender cables are connected to the correct devices.

• Beware of static electricity which may damage the device. Use ESD precautions

when installing.

• Do not plug or unplug cables while the devices are powered on.

WHAT'S INCLUDED

• HDMI Extender and Receiver x 8

• Power Adapter 230VAC to 5VDC 2A

• Operation Manual

• IR remote extender

• IR remote receiver x 8

• Based on HDbitT technology for a more stable performance.

• Distribute 1 HDMI source to 4 HDbitT outputs.

• Supports full HD resolution 1080p@60Hz.

• Support cascade connection by switch or router.

• Compatible with existing network, will not affect other network trafc.

• Plug and play setup.

• Convenient wall-mountable design.

This HDMI Extender allows a source HDMI signal to be split to 4 receivers and displays

over a range of up to 120meters at 1080p resolution using a CAT6/6A/7 network cable.

Requirements:

1. HDMI source device (PC, DVD, PS3) HD monitoring equipment etc.

2. HDMI display device like SDTV, HDTV, projector with HDMI port.

NOTE: It is recommended to use a high quality network cable to avoid signal loss and

crosstalk.

OVERVIEW

FEATURES

Transmitter

123 4 5 6 7

Receiver

1. Reset Button Press to restart the device

2. HDMI output Connect with HDMI display device

3. IR in Connect with IR receiver extension cable, please make sure

the remote control used is within the effective range

1. Reset button Press to restart the device

2. HDMI input Connect with the source device

3. IR out Connect with IR extension cable

4. Transmission LED Illuminates during data transmission

5. Connection LED Illuminates when a good network connection is attained

6. RJ45 signal output Connect with network cables

7. 12VDC input Connect with 12VDC/3A power adapter

1 2 3

CAT CABLE REQUIREMENT

Follow the standard of IEEE-568B, It is recommended to select a high quality network

cable with less loss and crosstalk.

INSTALLATION

• Connect the HDMI input on the extender with the source device.

• Connect the extender TX RJ45 output ports to the receivers either directly using

CAT6 or better cable, or using high quality patch cables, connect via an existing

network.

• Connect HDMI output of HDMI extender RX to HDMI input of HDTV and set the TV

source input to correct HDMI input channel.

• Connect the power supply output to the extender 5V DC input and connect the PSU

to the mains and turn on the power. The power LED on the front of the extender

should illuminate.

• The receivers do not require external power.

IR User Guide:

• IR receiver extension cable should be connected to the IR IN port of the receiver.

• The IR emitter extension cable should be connected to the IR OUT port of the

transmitter.

• The emitter of the IR extension cable should face as close as possible to the IR

receiving window of the source device.

• Face the receiving head of the IR receiver extension cable toward the user for

unobstructed line of sight to the remote control.

• The IR receiver detects the users remote control and transmits the signal down the

network cable to the IR emitter which replicates the IR output to control the source

device.

SPECIFICATIONS

Voltage/Current DC 12V3A

Power consumption <10W

HDMI compliance HDMI 1.3

HDCP compliance HDCP 1.2

HDMI resolution 480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz,

720p@50/60Hz, 1080i@50/60Hz, 1080p@50/60Hz

Transport protocol HDbitT

Input and output signal 0.7~1.2Vp-p (TMDS)

Input and output DDC

signal

5Vp-p (TTL)

IR signal Support 20~60kHz IR device

Input cable length <8m

Output cable length <8m

Network CAT6/6A/7 <120m

Working temperature 0~60°C

Storage temperature -30~ 70°C

Humidity 0~90%RH (no condensation)

Dimension TX: 299(W) x 110.7(D) x 29.6(H)mm

RX: 97.5(W) x 97.5(D) x 25(H)mm

Material Alloy

Weight 430g total

CLEANING & MAINTENANCE

Clean the outside casing with a soft cloth lightly moistened with mild soap and water.

Never use any abrasive or solvents.

INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF ELECTRICAL &

ELECTRONIC EQUIPMENT.

When this product has reached the end of its life it must be treated as Waste Electrical

& Electronic Equipment (WEEE). Any WEEE marked products must not be mixed with

general household waste, but kept separate for the treatment, recovery and recycling

of the materials used. Contact your local authority for details of recycling schemes in

your area.

Made in China. PR2 9PP

Man Rev 1.0

Inhaltsverzeichnis

Andere PRO SIGNAL Medienkonverter Handbücher

PRO SIGNAL

PRO SIGNAL PSG3033 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3000 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3233 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3371 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3449 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG03772 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3375 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3028 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3372 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3373 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG08200 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3029 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3368 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3367 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3448 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3238 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3432 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3427 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3362 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG4360 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG03518 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3053 Bedienungsanleitung

PRO SIGNAL

PRO SIGNAL PSG3369 Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung