Page <2> V1.017/11/21
HDMI Amplifier Switcher
Newark.com/exclusive-brands
Farnell.com/exclusive-brands
Element14.com/exclusive-brands
Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for
the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change
without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness,
any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make
any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or
where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its
negligence. pro - SIGNAL is the registered trademark of Premier Farnell Limited 2019.
Part Number Table
Description Part Number
3 to 1 HDMI Switch with Remote/Manual Control PSG03500
Warranty
Limited Warranty 12 Months
Accessories Adapter
User Manual English Version
Intelligent Function
1) Once the source device is turned on or plugged in (should stay power-on mode), the switcher will automatically select this
source.
2) Once the source device is turned o or plugged out, the switcher will automatically select the next power-on source depending
on the sequence automatically
Note:
1) When the source devices are on the stand-by mode, its power supply should be turned o, otherwise this switcher can not
meet intelligent function.
2) When plugged in or out, this switcher is completely intelligent.
Operation
1) Connect the HDMI input source into the HDMI switcher. (Input cables are optional)
2) Press the button to select the inputs
3) For too long HDMI cable (over 5 metres), it is recommended to give a 5V DC power supply (optional) to the switch unit.
