WHAT’s IN THE BOX
OVERVIEW
IMPORTANT SAFETY INFORMATION
INSTALLATION
SPECIFICATIONS
• This device switches three HDMI input sources to any one HDMI display or projector.
• Supports 4K.
• Does not require a power supply. Some HDMI HD sources may have a small working
current and not supply enough power. Connect more than one device to supply
sufcient power. If required connect the USB DC 5V power cable to the converter and
to a device with a suitably equipped USB power socket.
• Main unit.
• USB power cable.
• IR extender cable.
• Remote control.
• User’s Manual.
Please read these instructions carefully before use and retain for future reference.
• Please make sure all devices you wish to connect have been powered off.
• Connect up to three source devices to the converter using appropriate HDMI cable.
• Connect the HDMI output to the display or projector.
• There is no requirement for power to this device but consequently a maximum total
cable length of 6m between source and display is recommended or quality may be
reduced.
• Power on the source and receiving devices.
• Press SWITCH on the front panel to select input channel. The corresponding LED will
illuminate.
• On the remote control pressing IN1 to IN3 will select the required input channel.
• Pressing AUTO will select whichever input channel has an active signal if only one
device is powered on, or it switches to a new source when one is detected.
• The front panel LEDs will display the channel selected.
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF ELECTRICAL &
ELECTRONIC EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste Electrical & Electronic
Equipment (WEEE). Any WEEE marked products must not be mixed with general household waste,
but kept separate for the treatment, recovery and recycling of the materials used. Contact your local
authority for details of recycling schemes in your area.
Made in China. PR2 9PP
Man Rev 1.0
Operating environment -10 to 40
o
/ Storage -20 to 60
o
, Humidity up to 85%
Power supply Optional 220-240V~50Hz
Power requirement 350mA / Optional 5V DC via USB
HDMI Input 24/50/60fs/1080P/1080i/720p/576p/576i/480P/480i,24/30/2160P
HDMI Audio support DTS-HD/Dolby-trueHD/LPCM/DTS/Dolby-AC3/DSD
In/Output DDC signal 5 Volts p-p (TT1L)
Max Bandwidth 225MHz
Dimensions 95 x 53 x 21
Weight (not inc PSU) 122g
