Pro1 Technologies T725 Bedienungsanleitung

Operation ManualOperation Manual

U.S. Registered Trademark. Patents pending

T725

Pro1 Technologies

Toll Free: 888-776-1427

Web: www.pro1iaq.com

Hours of Operation: M-F 9AM - 6PM Eastern

Table of Contents

Thermostat Operation

Thermostat Quick Reference

Programming

Warranty Information

Page

2-3

4-7

8-10

Una version en español

de este manual se puede

descargar en la pagina web

de la compañia.

Equipment damage hazard.

Do not operate the cooling

system if the outdoor

temperature is below 50 ˚F

(10 ˚C) to prevent possible

compressor damage.

Caution:

Rev. 1823

P.O. Box 3377

Springeld, MO 65808-3377

Thermostat OperationThermostat Operation

LCD Display

Glow in the dark light button

Fan Switch

System Switch

See page 4 for details about

this display read out.

The glow in the dark light

button will self illuminate for

several hours after

exposure to ambient light. This

button turns on the display

light when pressed.

Select ON or AUTO. ON will run

the fan continuously. AUTO will

cycle the fan on only when the

heating or cooling system is on.

Selects the operation mode

on your HVAC system.

Selecting HEAT turns on

the heat mode. Selecting

COOL turns on the cool

mode. Selecting OFF turns

both heating and cooling

o. Selecting EmH (for heat

pumps with auxiliary heat)

will lockout the compressor

and control emergency/

auxiliary heat.

When the battery icon appears replace your AA

batteries immediately. Failure to do so may result in your heat-

ing & cooling system becoming inoperable. Freezing or over

heating can occur.

Caution:

User Buttons

Use these buttons to set up

your programming options.

Refer to the next page for

detail.

Temperature Setpoint Buttons

Press the + or - buttons to

select the desired room tem-

perature.

Glow in the dark light button

Fan Switch

System Switch

Temperature Setpoint Buttons

LCD Display

User Buttons

FAN

ON AUTO EmHCOOL

OFF HEAT

LOW

Thermostat Quick Reference Thermostat Quick Reference

The low battery indicator is displayed when the AA battery

power is low. If the user fails to replace the battery within 21

days, the screen will only show the low battery indicator but

maintain all functionality. If the user fails to replace the

batteries after an additional 21 days (days 22-42 since rst “low

battery” display) the set points will change to 55˚F(Heating) and

85˚F(Cooling). If the user adjusts these setpoints away from

these it will hold for 4 hours then return to either 55˚F or 85˚F.

After day 63 the batteries must be replaced immediately to

avoid freezing or overheating because the thermostat will shut

the unit o until the battery is changed.

Important:

Battery Door Information

Use the nger bevel on

the lower portion of the

thermostat to open the

easy access battery door.

Replace with

2 AA Alkaline

Batteries. High

quality Alkaline

batteries are

recommended.

Simple operating instructions are

found on the back of the battery door.

Indicates the current room temperature

Time and day of the week

Setpoint: Displays the user selectable setpoint temperature.

Hold is displayed when the thermostat program is permanently overridden.

System Operation Indicators:

The COOL ON, HEAT ON or icon will display when the COOL, HEAT, or (fan) is on.

Note: The Compressor delay feature is active if these are ashing.

Low Battery Indicator: Replace batteries when this indicator is shown.

Button Options

Program Time Periods: This thermostat has 4 programmable time periods

per day.

LOW

Stages: Indicates the stages of heat that are active.

Thermostat Quick ReferenceThermostat Quick Reference

Temporary and Permanent Hold Feature

Temporary Hold: The thermostat will display HOLD and

RUN SCHED on the left of your screen when you press the

or key. If you do nothing, the temperature will remain at

this setpoint temporarily until next time period. Your program

setpoint will then replace your temporary setpoint.

Permanent Hold: If you press the HOLD key at the left of your

screen, you will see HOLD appear below the setpoint temperature

in the display. The thermostat will now permanently stay at this

setpoint and can be adjusted using the or keys.

To return to program: Press the RUN SCHED key at the left of your

screen to exit either temporary or permanent hold.

Filter Change Reminder

If your HVAC contractor has congured the thermostat to

remind you when the air lter needs to be changed, you will see

FILT in the display when your air lter needs to be changed.

Resetting the lter change reminder: When FILT reminder is

displayed, you should change your air lter and reset the reminder

by holding down the second button from the top left side of the

thermostat for 3 seconds.

Hold down 3 seconds,

to reset lter reminder.

Understanding Your Thermostats Staging:

This thermostat controls 2 stages of heating. For reasons of energy

eciency the thermostat will try to maintain your comfort setting

using only 1 stage. If the 2nd stage is necessary it will be used and

you will see Stage 2 in the display.

FAN

ON AUTO EmHCOOL

OFF HEAT

Programming The Thermostat

1. With system switch set to OFF, press the MENU button

2. Press SET TIME

3. Day of the week will be ashing. Use the or key

to select the current day of the week.

4. Press NEXT STEP

5. The current hour is ashing. Use the or key to

select the current hour. When using 12-hour time, make

sure the correct a.m. or p.m. choice is selected.

6. Press NEXT STEP

7. Minutes are now ashing. Use the or key to

select current minutes.

8. Press DONE when completed.

Set Time

1. Select HEAT or COOL with the system switch. Note: You have

to program heat and cool each seperately.

2. Press the MENU button (If menu does not appear rst press RUN SCHED)

3. Press SET SCHED. Note: Monday-Friday or (Monday if in 7 Day)

is displayed and the WAKE icon is shown. You are now

programming the wake time period for that day.

4. Time is ashing. Use the or key to make your

time selection for that day’s WAKE time period.

5. Press NEXT STEP

6. The setpoint temperature is ashing. Use the or

key to make your setpoint selection for that day’s WAKE

time period.

7. Press NEXT STEP

8. Repeat steps 4 thru 7 for that day’s LEAVE time period,

RETURN time period, and SLEEP time period.

To customize your program schedule, follow these steps:

Set Program Schedule 5+1+1 or 7 Day

Programming The Thermostat

Continued on next page...

Warranty Information

Warranty Registration

Your new thermostat has a 5 year limited warranty. You must register

your thermostat within 60 days of installation. Without this

registration the warranty period will begin on date of manufacture.

For warranty issues please contact the HVAC professional that

installed this product. You can register your new thermostat in 2 ways:

Go to the company website, select warranty registration and

ll out a short registration form.

Complete the form below and mail it to the address shown.

Warranty Registration

Online

Mail

Set Program Schedule 5+1+1 or 7 Day (Continue...)

Programming The Thermostat

You can also use these time saving functions. You must be in Set Sched

Programming Mode (Press Menu >> Press Set Sched) for the following

functions to work:

1) To copy ALL time periods and temperatures of current system and day

to ALL days, Press and Hold 2nd button down on left until the Days and

Time ash.

2) To copy ALL time periods (only times) for ALL days to the opposite

system (Heat to Cool / Cool to Heat), Press and hold the Glow in the Dark

Light button down until Set Time and Time ash.

Repeat steps 4 through 7 for the Saturday WAKE time period, LEAVE time

period, RETURN time period, and for the Saturday SLEEP time period.

Saturday:

Repeat steps 4 through 7 for the Sunday WAKE time period, LEAVE time

period, RETURN time period, and for the Sunday SLEEP time period.

Sunday:

If using 7-Day Programming use previous steps for

every individual day.

Thermostat Model:

Date Installed:

Complete form and mail to:

Thermostat Warranty Registration

Pro1iaq

P.O. Box 3377

Springeld, MO 65808-3377

Name:

Address:

City:

State:

Zip:

www.pro1iaq.com

Cut Out For

Warranty Registration

Andere Pro1 Technologies Thermostat Handbücher

Pro1 Technologies

Pro1 Technologies T601-2 Bedienungsanleitung

Pro1 Technologies

Pro1 Technologies T955 Bedienungsanleitung

Pro1 Technologies

Pro1 Technologies T731 Bedienungsanleitung

Pro1 Technologies

Pro1 Technologies T625-2 Bedienungsanleitung

Pro1 Technologies

Pro1 Technologies T705 Bedienungsanleitung

Pro1 Technologies

Pro1 Technologies T955 Bedienungsanleitung

Pro1 Technologies

Pro1 Technologies T805 Bedienungsanleitung

Pro1 Technologies

Pro1 Technologies T601-2 Bedienungsanleitung

Pro1 Technologies

Pro1 Technologies RZ251W Bedienungsanleitung

Pro1 Technologies

Pro1 Technologies T955 Bedienungsanleitung

Pro1 Technologies

Pro1 Technologies T855i Bedienungsanleitung

Pro1 Technologies

Pro1 Technologies T721i Bedienungsanleitung

Pro1 Technologies

Pro1 Technologies T731W Bedienungsanleitung

Pro1 Technologies

Pro1 Technologies T631-2 Bedienungsanleitung

Pro1 Technologies

Pro1 Technologies T721i Bedienungsanleitung

Pro1 Technologies

Pro1 Technologies T855 Bedienungsanleitung

Pro1 Technologies

Pro1 Technologies T805 Bedienungsanleitung

Pro1 Technologies

Pro1 Technologies T855 Gebrauchsanweisung

Pro1 Technologies

Pro1 Technologies T955S Bedienungsanleitung

Pro1 Technologies

Pro1 Technologies T771 Bedienungsanleitung

Pro1 Technologies

Pro1 Technologies RZ251W Bedienungsanleitung

Pro1 Technologies

Pro1 Technologies T955WH Bedienungsanleitung

Pro1 Technologies

Pro1 Technologies T755 Bedienungsanleitung

Pro1 Technologies

Pro1 Technologies T605-2 Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Honeywell

Honeywell CM721 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

Honeywell

Honeywell RLV4305 Bedienungsanleitung

Honeywell

Honeywell Prestige 2.0 THX9421 Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung