PROAIM JB-FLMS-01 Bedienungsanleitung
1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Assembly Manua l
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Fly-master 13 Telescopic Carbon Fiber
Jib Crane (JB-FLMS-01)
Fly-Master Jib for Zhiyun Crane-2
Top Cable Wire
Cable Guide Rod
Weight Rod
2
Loosen the boom clamp of the uid head
(Not Included) and mount it on the stand.
Fly Master Jib Setup
Then properly ghten the boom clamp on
the 100mm bowl stand (Not Included), as
shown in the image.
NOTE: It comes with a tripod mount with 1/4"
-20 and 3/8"-16 threads on the boom to mount
it on the uid head.
Now remove the uid head plate by pressing
the lock lever.
Aach the plate to the Fly-master Jib and
securely ghten it, matching the threads, with
the help of a screwdriver.
NOTE: It extended when not in use at
congested shoot sites. Just slide in or out when
required.
Now mount the Fly-master Jib on top of the
uid head and properly ghten it with the
locking lever.
3
Loosen the knob and increase the height of
the jib as shown in the image.
Aach the Gimbal mounng adapter to the
Gimbal (Not Included) and properly ghten
using a screwdriver.
NOTE: Any other gimbal with a handle,
featuring a 1/4"-20 or 3/8" -16 threaded hole at
its boom, can be aached.
NOTE: You can increase the lengths of jib as
per requirement.
Loosen the ratchet knob and open the clamp.
Then remove the Gimbal mounng adapter,
as shown in the image.
Aach the Gimbal (Not Included) to the clamp
and properly ghten it via the knob.
Gimbal Setup
4
Then properly ghten the knob.
NOTE: High-grade Aluminum constructed
clamps at each secon’s end promise a strong
clamping force.
Loosen the knob and insert the weight rod.
Properly ghten the knob.
NOTE: Provided highly robust weight rod
supports universal weight plates with a 25mm
hole diameter.
Loosen the clamp’s knob and rotate the
clamp.
Insert weight (Not Included) according to
your requirement.
Inserng weight rod in Fly master jib
NOTE: It’s compable with Zhiyun Crane-2 &
other hand-held gimbals with 1/4” or 3/8”
Mounng threads.
5
Now loosen the clamp's knob and rotate the
clamp.
Now, properly ghten the knob and insert the
cable guide rod.
Then insert the top cable wire into the rod, as
shown in the image.
NOTE: Set the Cable Guide rods’s posion
according to your requirement.
Similarly, insert the second end of the wire
into the clamp, as shown in the image
NOTE: It facilitates convenient underslung &
over-slung operaons for various shot
requirements.
Properly aach the rst end of the top cable
wire to the clamp.
Aaching Top cable wire
6
NOTE: Compable gimbals- Zhiyun-Tech
Crane-2 Gimbal (Direct) Single Handle Gimbals
with 1/4"-20 & 3/8"-16 Mounng Threads.
Then properly ghten with the help of the
knob.
NOTE: Tripod mount also has a total of three
1/4"-20 threaded holes on the sides to aach
monitors & other accessories.
LCD Monitor Setup
Maximum Extandable Length of Fly Master Jib
NOTE: Fully extended length=13. & Length of 1st 3 each secon =3. & length of last secon=4.
Properly match the threads of the LCD (Not
Included) and mount the LCD, as shown in the
image.
7
YOUR PROAIM FLY-MASTER TELESCOPIC CARBON FIBER JIB CRANE
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our ut-
most support and care unl you use our product.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere PROAIM Kamerazubehör Handbücher
PROAIM
PROAIM P-PTBH-01 Bedienungsanleitung
PROAIM
PROAIM JB-AS12-00 Bedienungsanleitung
PROAIM
PROAIM CINEMA LV-4WAY-01 Bedienungsanleitung
PROAIM
PROAIM CINEMA DL-MRCS-01 Bedienungsanleitung
PROAIM
PROAIM CINEMA Series Bedienungsanleitung
PROAIM
PROAIM P-ZL-S3 Bedienungsanleitung
PROAIM
PROAIM CINEMA Series Bedienungsanleitung
PROAIM
PROAIM P-L2-SL Bedienungsanleitung
PROAIM
PROAIM SnapRig CG210 Bedienungsanleitung
PROAIM
PROAIM SC-03 Bedienungsanleitung
PROAIM
PROAIM P-WV-2PL-PP Bedienungsanleitung
PROAIM
PROAIM CINEMA Series Bedienungsanleitung
PROAIM
PROAIM Kite-22 Ultimate Package Bedienungsanleitung
PROAIM
PROAIM FLCM-GAXS Bedienungsanleitung
PROAIM
PROAIM CT-CMCL-01 Bedienungsanleitung
PROAIM
PROAIM P-A21-J Bedienungsanleitung
PROAIM
PROAIM P-TWS-QS Bedienungsanleitung
PROAIM
PROAIM DW-PRTD Bedienungsanleitung
PROAIM
PROAIM P-TMGC-01 Bedienungsanleitung
PROAIM
PROAIM FLN-CTDB Bedienungsanleitung
