Proconx SERIP-100 Bedienungsanleitung
SERIP-100
Serial Device Server
Usermanual
UMSERIP100-2201
SERIP-100
Serial Device Server: Usermanual
Copyright © proconX Pty Ltd. All rights reserved.
No part of this material may be reproduced or transmitted in any form or by any means or used to make any derivative work without
express written consent from the copyright holders.
proconX is a trademark of proconX Pty Ltd. Windows is a registered trademark of Microsoft Corporation in the United States and
other countries. All other product and brand names mentioned in this document may be trademarks or registered trademarks of their
respective owners.
Disclaimer
proconX Pty Ltd makes no warranty for the use of its products, other than those expressly contained in the Company’s standard warranty
which is detailed in the Terms and Conditions located on the Company’s Website. The Company assumes no responsibility for any errors
which may appear in this document, reserves the right to change devices or specifications detailed herein at any time without notice,
and does not make any commitment to update the information contained herein. No licenses to patents or other intellectual property
of proconX are granted by the Company in connection with the sale of proconX products, expressly or by implication. proconX products
are not authorized for use as critical components in life support devices or systems.
Support & product feedback
We provide an electronic support and feedback system for our proconX products. It can be accessed through the following web link:
https://www.proconx.com/support
Your feedback and comments are always welcome. It helps improving this product.
Contact
For further information about the SERIP-100 product please visit https://www.proconx.com/serip100
UMSERIP100-2201 iii
Contents
Important user information ......................................................................................... v
Safety Precautions ................................................................................................ v
Document conventions ........................................................................................ vi
1 Introduction ............................................................................................................. 1
Features ................................................................................................................ 2
Quick start checklist ............................................................................................. 3
2 Description ............................................................................................................... 5
LED indicators ...................................................................................................... 5
Operating modes ................................................................................................. 6
TCP Server mode .......................................................................................... 6
Telnet Server mode ....................................................................................... 7
TCP Client mode ........................................................................................... 7
Telnet Client mode ....................................................................................... 8
Client/Server operation ................................................................................. 8
UDP tunneling .............................................................................................. 9
3 Installation .............................................................................................................. 11
Regulatory notes ................................................................................................ 11
Unpacking, handling and storage ...................................................................... 11
Before connecting anything ............................................................................... 11
DIN rail mounting and removal ......................................................................... 12
Mounting rules .................................................................................................. 12
Powering the SERIP-100 ..................................................................................... 13
Wiring the RS-485/RS-422 interface ................................................................... 13
Wiring the RS-232 interface ............................................................................... 14
Connecting Ethernet .......................................................................................... 15
4 Ethernet & IP configuration ................................................................................... 17
IP setup using a web browser and a cross-over network cable .......................... 17
IP setup using a terminal program like HyperTerminal ....................................... 18
Temporarily changing the IP settings on your PC ............................................... 19
5 Web browser based management ......................................................................... 21
Connecting to the SERIP-100 ............................................................................. 21
Monitoring and diagnostic ................................................................................ 22
Device status .............................................................................................. 22
Ethernet status ........................................................................................... 23
Finding the firmware version and serial number ........................................ 24
Configuring and commissioning ........................................................................ 24
Configuring Ethernet and IP ....................................................................... 25
Configuring Operating mode ..................................................................... 26
Configuring serial port ............................................................................... 28
Remote restarting the device ..................................................................... 28
Backup and restoring of configuration settings ......................................... 29
Password protection ................................................................................... 31
Firmware upgrade ...................................................................................... 32
6 Virtual COM port redirector ................................................................................... 33
Installing the SERIP Toolkit ................................................................................. 33
Creating virtual COM ports ................................................................................ 36
Starting and stopping ........................................................................................ 39
SERIP COM Manager user interface ................................................................... 40
iv UMSERIP100-2201
Status pane ................................................................................................ 41
Settings pane ............................................................................................. 42
Device Webpage pane ................................................................................ 44
Redirecting the virtual COM port to a SERIP-100 serial device server ................. 44
7 Decommissioning ................................................................................................... 47
Disconnecting ..................................................................................................... 47
Disposal .............................................................................................................. 47
A Specifications ......................................................................................................... 49
Dimensions ......................................................................................................... 50
Glossary ..................................................................................................................... 51
Index .......................................................................................................................... 53
Figures
1.1 SERIP-100 operation .............................................................................................. 2
2.1 Location of connectors .......................................................................................... 5
2.2 SERIP-100 in TCP Server mode configuration accepting connections from a
PC ................................................................................................................................ 7
2.3 SERIP-100 in TCP Client mode configuration connecting to a server ...................... 8
2.4 Two SERIP-100 in Client/Server mode configuration .............................................. 9
2.5 Two SERIP-100 in UDP Tunnel mode configuration ............................................. 10
5.1 Device management and configuration via the web browser .............................. 21
5.2 Overview page .................................................................................................... 22
5.3 Ethernet status page ........................................................................................... 23
5.4 About page ......................................................................................................... 24
5.5 Ethernet and IP settings page ............................................................................. 25
5.6 IP settings changed to static IP confirmation ...................................................... 26
5.7 IP settings changed to DHCP confirmation ......................................................... 26
5.8 SERIP-100 settings page ...................................................................................... 26
5.9 Serial settings page ............................................................................................. 28
5.10 Restart device page ........................................................................................... 29
5.11 Restart confirmation page ................................................................................. 29
5.12 Backup/Restore page ......................................................................................... 30
5.13 Password page .................................................................................................. 31
5.14 Authentication dialog ........................................................................................ 31
6.1 Components of the SERIP Toolkit ........................................................................ 33
6.2 SERIP COM Manager main window .................................................................... 40
6.3 SERIP COM Manager status pane ........................................................................ 41
6.4 SERIP COM Manager settings pane ..................................................................... 42
6.5 SERIP COM Manager device web page pane ....................................................... 44
A.1 Enclosure dimensions .......................................................................................... 50
Tables
2.1 LED diagnostic codes ............................................................................................ 6
3.1 Power supply connector pinout .......................................................................... 13
3.2 RS-485/RS-422 connector pinout ......................................................................... 13
3.3 RS-232 connector pinout .................................................................................... 14
3.4 Ethernet connector pinout .................................................................................. 15
Important user information
UMSERIP100-2201 v
Important user information
This manual explains how to install, operate and configure a SERIP-100. This device may
only be used for the applications described in this document.
This manual is to be used with a SERIP-100 with firmware version 2.2.
These instructions are intended for use by trained specialists in electrical installation
and control and automation engineering, who are familiar with the applicable national
standards and safety procedures.
Safety Precautions
ELECTRICAL HAZARD
• This equipment must be installed and serviced only by qualified personnel. Such
work should be performed only after reading this entire set of instructions.
• Before performing visual inspections, tests, or maintenance on this equipment,
disconnect all sources of electric power. Assume that all circuits are live until they
have been completely de-energized, tested, and tagged. Pay particular attention
to the design of the power system. Consider all sources of power, including the
possibility of backfeeding.
• Apply appropriate personal protective equipment and follow safe electrical
practices.
• Turn off all power supplying the equipment in which the SERIP-100 is to be
installed before installing, wiring or removing the SERIP-100.
• Always use a properly rated voltage sensing device to confirm that power is off.
• The successful operation of this equipment depends upon proper handling,
installation, and operation. Neglecting fundamental installation requirements
may lead to personal injury as well as damage to electrical equipment or other
property.
Failure to follow these instructions could result in death or serious injury!
vi UMSERIP100-2201
Document conventions
Throughout this manual we use the following symbols and typefaces to make you aware
of safety or other important considerations:
Indicates a potentially hazardous situation that, if not
avoided, could result in death or serious injury.
Indicates a potentially hazardous situation that, if not
avoided, could result in damage to equipment.
Indicates information that is critical for successful applica-
tion and understanding of the product.
Provides other helpful user information that does not fall in
above categories.
Provides supplemental user information.
Acronym This typeface is used to introduce acronyms or product
names.
Command This typeface is used to represent commands, prompts, in-
put fields and filenames. In the context of programming
it is used for functions, variable names, constants or class
names.
Placeholder This typeface is used to represent replacable text. Replace-
able text is a placeholder for data you have to provide, like
filenames or command line arguments.
User input This typeface is used to represent data entered by the user
or buttons.
Screen output
Screen output or program listing
Introduction
UMSERIP100-2201 1
Chapter 1.Introduction
SERIP-100 is a serial to Ethernet interface converter. The unit enables serial devices to
connect to an IP-based Ethernet LAN.
The SERIP-100 receives data on the serial port, converts the data stream into either a
TCP or UDP packet and transmits the packet via the Ethernet network. Vice versa, data
contained in packets received on the network interface are transmitted on the serial port.
Two SERIP-100 operating in UDP tunneling mode can be used to overcome the length
limitation of RS-232 and to connect two serial devices utilizing IP network infrastructure.
2UMSERIP100-2201
RS-232
RS-485
SERIP-100
IP based
network
IP based
network
Ethernet
Figure1.1:SERIP-100 operation
Configuration of the gateway is simple and conveniently performed using a web browser
which connects to the embedded web server.
The unit’s firmware adheres to the Internet Standards (RFCs) as close a possible.
This provides it with a high degree of compatibility with a broad range of available
commercial and open source middleware, drivers and utilities.
Features
The SERIP-100 gateway provides the following key features:
• Versatile modes of operation (Server, Client, UDP tunnel)
• Telnet protocol compliant (any port)
• Includes SERIP Toolkit with virtual COM port redirector software for Windows
operating systems
• Compatible with the ttyd virtual device driver and Termpkg package for Linux
• Embedded web server for easy configuration and commissioning using a web browser
• Firmware upgradeable via Ethernet
• DIN rail mountable
• 24 V DC (10-30 V) power supply
• Status LEDs for power, Ethernet link and communication status
Introduction
UMSERIP100-2201 3
Quick start checklist
• Read this set of instructions properly and in its entirety.
• Mount the unit.
• Connect the power. Do not connect yet serial ports.
• Configure the Ethernet communications settings with a web browser (using an
Ethernet crossover cable) or with a terminal program like HyperTerminal (using a null
modem cable)
• Configure the serial line communication settings.
• Configure the operational aspects of the device.
• Wire serial line interfaces.
This page intentionally left blank
4UMSERIP100-2201
Inhaltsverzeichnis
Beliebte Netzwerk-Hardware Handbücher anderer Marken
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung
Yudor
Yudor YDS-16 Bedienungsanleitung
D-Link
D-Link ShareCenter DNS-320L Bedienungsanleitung
Samsung
Samsung ES1642dc Gebrauchsanweisung
Honeywell Home
Honeywell Home LTEM-PV Montageanleitung
