Profoon PDX-2808 Bedienungsanleitung

USER’S MANUAL

PDX-2808

PDX-2808 DUO

1 OVERVIEWS

1.1 HANDSET:

handset speaker

display,

see the next paragraph

handset

microphone

recharge contacts, to recharge the handset battery by placing the

handset onto the cradle/charger

button,

see the next page

and buttons,

see the next page

keypad, see the next page

telephone function buttons,

see the next page

direct memory buttons

indicator; ashes when

receiving a call, remains lit

when the BOOST function is

enabled

direct memory buttons

R button: function button for

certain telecom services

in standby mode, press to open

the menu

during setup, press to conrm your settings

correction button when entering phone numbers or names

during setup, press to go back one step

in stand-by mode, press to start an intercom call (PDX-2808 DUO only)

during a call, press to switch o󰀨 the microphone

press to answer an incoming call or to start a phone conversation

during a call, press again to enable or disable the speaker function

press to end a call

press and hold (> 5 sec.) to switch o󰀨 the handset

in standby mode, press to open the Caller-ID memory

in standby mode, press to open the last dialled number memory

press to scroll through memories or settings

0-9 buttons: to dial phone numbers and to enter memories

‘asterisk’ and ‘pound’ buttons: used for e.g. telecom banking

+ extra:

button *: press and hold 2 seconds to lock and unlock the keyboard

button #: press and hold 2 seconds so switch-OFF and ON the ringer signal

BOOST button: during a call, press to en-

able the extra amplier

and buttons: during a call, press to

increase or decrease the volume

1.2 DISPLAY:

ashes when the connection between the handset and base is lost

remains lit when the handset is within range of the base

ashes when receiving an external call

remains lit during a call

ashes when receiving an internal call

remains lit during an intercom call

illuminates when the speaker function is enabled

illuminates when checking the Caller-ID memory and having new

calls

shows the status of the rechargeable batteries:

= batteries are full

= batteries are 2/3 full

= batteries are 1/3 full, recharge as soon as possible

= batteries are empty, the handset will switch o󰀨 and you can no

longer make calls

the battery symbol will scroll while charging until the batteries are fully

charged

illuminates when the number is too long to be shown in the display

(press the # button to see the rest of the number)

handset name (HS) and

internal number (1)

illuminates when you’ve receiver a voicemail message (only FSK

systems)

illuminates when the alarm (wake-up) function is enabled

illuminates when the ring volume is set to 0 (switched o󰀨)

1.3 BASE:

page button: to page all handsets (hand-

set search button), also used for register-

ing new handsets.

charging contacts:the rechargeable bat-

teries in the handset are charged via

these contacts

2 INSTALLATION

2.1 BASE STATION:

Telephone connection:

Plug the small connector at the phone cable into the back of the base

station (press the connector until you hear a click). Plug the phone

connector into the phone socket.

Power supply:

Connect the supplied power adaptor to the input at the rear of

the base and insert the adaptor into a 230V wall socket.

ONLY CONNECT THE INCLUDED ADAPTER. CONNECTING

OTHER ADAPTERS MAY RESULT IN DANGEROUS SITUA-

TIONS OR MAY CAUSE DAMAGE TO THE ELECTRONICS OF THE

PHONE.

Power adaptor input

Phone line input

2.2 HANDSET:

1. Open the battery compartment of the handset, by sliding the battery

cover down.

2. Insert the batteries into the battery compartment; at this, pay atten-

tion to the polarity (+ and -).

3. Slide the battery cover back onto the handset and place the handset

on the base station.

4. Leave the handset continuously during 15 hours on the base station,

to charge the batteries properly.

INSERT ONLY RECHARGEABLE NiMH (NICKEL METAL

HYDRIDE) BATTERIES. THE USE OF NON RECHARGE-

ABLE BATTERIES MAY CAUSE DANGEROUS SITUATIONS OR

EXPLOSION HAZARD.

2.3 EXTRA HANDSET AND CHARGER: (PDX-2808 DUO)

2 batteries and a charger with adapter will be included for every

handset. Plug the adapter of these chargers in a 230 Volt mains

socket, insert the batteries into the handset(s) and place the

handset(s) on the charger(s) for 15 hours to charge the batteries.

3 CALLING

3.1 RECEIVING CALLS:

when you receive a call, the display lighting of the handset will switch on

and the indicator at the top of the handset starts ashing

press the Call button to answer this call

• see paragraph 10.2, item [ Auto antw ] answering calls by only from the base station

3.2

CALLING WITH THE PHONE OR USING THE HANDS-FREE FUNCTION:

You can make calls holding the handset against your ear or you can use

the speaker function allowing other household members to listen in or to

keep your hands free for e.g. making notes

during a call, press the Call button again to switch on the

speaker function

press the Call button again to switch the speaker func-

tion back o󰀨

3.3 ENDING CALLS:

press the End button to disconnect your call

• you can also place the handset back onto the base or cradle/charger to disconnect a

call

3.4 DIALLING NUMBERS:

Direct dialing:

Press the phone-on key and wait for the dial tone.

Enter the phone number through the keyboard; this

number will be dialed directly.

pre-dialling:

Enter the phone number through the keyboard.

• press and hold the 0 button for at least once second to insert a

dialling pause (the display will show -P-)

• press the C button to delete any incorrect input

press the Call button to dial the number

dialling from the phonebook memory:

press 2x the button

use the and buttons to search for the desired

memory

press the Call button to dial the number

• see paragraph 7.3 for programming phonebook memories

dialling from the Caller-ID memory:

press the button and use the and buttons to

select the desired call

press the Call button to dial the selected number

dialling from the last dialled number memory:

press the button and use the and buttons to

select the desired call

press the Call button to dial the selected number

dialling speed-dial contacts

press and hold the M1 or M2 button for 2 seconds

the handset will switch on and the number is dialled

• see paragraph 10.2, item [ Snelkeuz ] for programming these

speed-dial memories

dialling direct memories

press and hold one of the 0-9 buttons on the keypad for

at least 2 seconds

the handset will switch on and the number is dialled

• see paragraph 7.7 for programming the direct memories

2 sec.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Profoon Telefon Handbücher

Profoon

Profoon TX-525 Bedienungsanleitung

Profoon

Profoon TX-106 Bedienungsanleitung

Profoon

Profoon TX-105 Bedienungsanleitung

Profoon

Profoon TX280 Bedienungsanleitung

Profoon

Profoon TX-178B Bedienungsanleitung

Profoon

Profoon Profoon TX-255 Bedienungsanleitung

Profoon

Profoon TX-555 Bedienungsanleitung

Profoon

Profoon TX 270 Bedienungsanleitung

Profoon

Profoon Profoon TX-117 Bedienungsanleitung

Profoon

Profoon TX-117(B) Bedienungsanleitung

Profoon

Profoon DECT Series Bedienungsanleitung

Profoon

Profoon TX-250(CW) Bedienungsanleitung

Profoon

Profoon TX-230 Bedienungsanleitung

Profoon

Profoon TX-310 Bedienungsanleitung

Profoon

Profoon TX-129vm Bedienungsanleitung

Profoon

Profoon TX-115 Bedienungsanleitung

Profoon

Profoon PDX-5200 series Bedienungsanleitung

Profoon

Profoon TX-325 Bedienungsanleitung

Profoon

Profoon DECT Series Bedienungsanleitung

Profoon

Profoon TX-180 Bedienungsanleitung

Profoon

Profoon TX-550vm Bedienungsanleitung

Profoon

Profoon TX-119 Bedienungsanleitung

Profoon

Profoon TX-112 Bedienungsanleitung

Profoon

Profoon TX-160 Bedienungsanleitung

Beliebte Telefon Handbücher anderer Marken

GE 2-9480 Bedienungsanleitung

Geemarc

Geemarc PHOTOPHONE 155 Bedienungsanleitung

Interquartz

Interquartz Gemini IQ333 Bedienungsanleitung

SSS Siedle

SSS Siedle HT 840-0 Bedienungsanleitung

Motorola

Motorola TITANIUM Bedienungsanleitung

Panasonic

Panasonic ICX Bedienungsanleitung

LG H870DS Bedienungsanleitung

Samsung

Samsung GT-I9500 Bedienungsanleitung

AT&T

AT&T Trimline 205 Bedienungsanleitung

Selta

Selta zenyth 600 Bedienungsanleitung

Doro

Doro AFTI 20 Bedienungsanleitung

UNIQCELL

UNIQCELL A1 Bedienungsanleitung

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Bedienungsanleitung

BT Decor 425 Bedienungsanleitung

NEC

NEC SV8500 Bedienungsanleitung

Teledex

Teledex PEARL Bedienungsanleitung

Ericsson

Ericsson Dialog 3213 Bedienungsanleitung

Yealink

Yealink VP530 Bedienungsanleitung