ProFusion PS-10241 Bedienungsanleitung

Wall-Mounted Salamander Heater

OWNER’S MANUAL

PS-10241WP 10KW 240V 60Hz 1P

PS-30483W 30KW 480V 60Hz 3P

IMPORTANT INSTRUCTIONS

READ & SAVE

Technical support: 1-866-206-0888

Service email: info@mecanair.net

TABLE OF CONTENTS

Important Instructions………………………………………3-4

Specifications and Wiring Diagram………………………5-7

Parts of the heater ……………………….………………….8

Installing Instructions……………………….…………..….9-11

Operating Instructions……………………….………....…..12

Maintenance and Cleaning…………………………………13

Warranty Information ……………………………………….13

IMPORTANT INSTRUCTIONS

PLEASE READ ALL INSTRUCTIONS BEFORE USING THIS

HEATER

NOTE: There may be a trace of smoke or odor when unit is first

operated. Don’t be alarmed. This indicates that a drop of oil

fell on the heating coil during the manufacturing process. It will

quickly evaporate and should not re-occur.

Make sure that the room in which the appliance is located is

well ventilated during this operation. It is normal for the

appliance to emit small cracking sounds when you turn it on

for the first time. Do not be alarmed.

WHEN USING ELECTRICAL APPLIANCES, BASIC

PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO

REDUCE RISK OF FIRE, ELECTRICAL SHOCK AND INJURY TO

PERSONS OR PROPERTY, INCLUDING THE FOLLOWING:

1) Read all instructions before using this heater.

2) This heater is hot when in use. To avoid burns, do not let bare

skin touch hot surfaces. Keep combustible materials, such as

furniture, pillows, bedding, papers, clothes, and curtains at least 3’

(0.9 m) from the front of the heater and keep them away from the

sides and rear.

3) Extreme caution is necessary when any heater is used by or

near children or invalids and whenever the heater is left operating

and unattended.

4) Always switch off the heater when not in use.

5) Do not operate any heater after the heater malfunctions, has

been dropped or damaged in any manner. Disconnect power at

service panel and have heater inspected by a reputable electrician

before reusing.

6) Do not use outdoors.

7) To disconnect heater, turn off power to heater circuit at main

disconnect panel.

8) Do not install less than 6 feet (1.8m) high from the floor and

keep the mounting bracket not less than 4 feet (1.2m) away from

any adjacent vertical surface. Keep at least 4.5 inches (11.5cm)

from the back wall (with or without using the wall hanging mounting

bracket).

9) Do not insert or allow foreign objects to enter any ventilation or

exhaust opening as this may cause an electric shock or fire, or

damage the heater.

10) To prevent a possible fire, do not block air intakes or exhaust in

any manner.

11) A heater has hot and arcing or sparking parts inside. To reduce

the risk of fire, do not use it in areas where gasoline, paint, or

flammable vapors and liquids are used or stored.

12) Use this heater only as described in this manual. Any other use

not recommended by the manufacturer may cause fire, electric

shock, or injury to persons.

13) This product must be installed by a certified electrician, in

accordance with local codes.

14) Avoid the use of an extension cord because the extension cord

may overheat and cause a risk of fire.

15) This heater is not intended for use in bathrooms, laundry areas

and similar indoor locations. Never locate heater where it may fall

into a bathtub or other water container.

CAUTION –High temperature, risk of fire, keep electrical cords,

drapery, furnishings, and other combustibles at least 3 feet (0.9

m) from the front of the heater and away from the side and rear.

PET OWNERS WARNING:

The health of some small pets including birds are extremely

sensitive to the fumes produced during the first-time use of

many appliances. These fumes are not harmful to humans but

we recommended that you do not use your heater around birds

and small pets during its initial use until the manufacturing

corrosion coatings burn off.

SAVE THESE INSTRUCTIONS

Wall-Mounted Salamander Heater

Model: PS-10241

MANUFACTURER No.: PS-10241WP

Volt: 240 V, 1P

Watts: 10KW

Frequency: 60 Hz

Wiring diagram:

SPECIFICATIONS

Model: PS-30483

MANUFACTURER No.: PS-30483W

Volt: 480 V, 3P

Watts: 30KW

Frequency: 60 Hz

Wiring diagram:

Wiring Instruction

For 3 Phase Model: PS-30483

Open the cover.

After connection.

Earth Wire

L2 (Live Wire2

Black)

L3 (Live Wire3

Red)

L1 (Live Wire1

White)

A. Wall Mount Bracket

B. Hanger

C. Heater Housing

D. Front Exhaust Grill

E. ON/OFF Switch

F. Temperature Setting Knob

PARTS OF THE HEATER

WARNING:All wiring must be installed by a certified electrician

according to the electrical safety.

The heater must be grounded in accordance with all national and

local building codes.

All Wiring procedures and connections shall be in accordance

with the national and local codes having jurisdiction.

Before installation:

Disconnect the main supply connection.

The heater must be connected to individual branch circuit protected

by 65 Amp circuit breaker only.

Supply cables must be equipped with a dual pole circuit breaker

rating at least 240V 65A/pole as main cutoff switch of power

connection to the heater.

CAUTION: High temperature, risk of fire, keep electrical cords,

drapery, furnishings, and other combustibles at least 3 feet (0.9 m)

from the front of the heater and away from the side and rear.

WARNING: To reduce the risk of fire, do not store or use gasoline

or other flammable vapors and liquids in the vicinity of the heater.

INSTALLATION INSTRUCTION:

1. Keep the unit at least 6 feet (1.8m) away from the floor. This

minimum distance must be maintained.

2. Do not install closer than 4 feet (or 1.2 m) to any adjacent

vertical surfaces or walls.

3. Keep at least 4.5 inches (11.5cm) from the back wall (with or

without using the wall hanging mounting bracket).

4. Mark the drill-hole positions in the wall for the mounting bracket.

5. Drill the required holes with diameter fit for the anchor provided

for positioning the mounting bracket.

6. Insert the anchors.

7. Attach the mounting bracket to the wall and secure with

mounting screws.

INSTALLING INSTRUCTIONS

8. Hook the heater to the hanger with two hexagon head screws

and rubber pads, tighten the screws.

9. Insert the hexagon head screw through the hanger and the

mounting bracket, tighten the nut.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ProFusion Heizung Handbücher

ProFusion

ProFusion SHAG-L02F Bedienungsanleitung

ProFusion

ProFusion EH-4604 Bedienungsanleitung

ProFusion

ProFusion PH-935E Bedienungsanleitung

ProFusion

ProFusion QH-1 Betriebsanleitung

ProFusion

ProFusion HA24-75MB Bedienungsanleitung

ProFusion

ProFusion PH-960N Bedienungsanleitung

ProFusion

ProFusion PH-9100WN Bedienungsanleitung

ProFusion

ProFusion PH-934 Bedienungsanleitung

ProFusion

ProFusion NDB-1Y Bedienungsanleitung

ProFusion

ProFusion HA22-48M Bedienungsanleitung

ProFusion

ProFusion PH-960XNR Bedienungsanleitung

ProFusion

ProFusion GD8110BP-M Bedienungsanleitung

ProFusion

ProFusion H-4439 Bedienungsanleitung

ProFusion

ProFusion HA24-50E Bedienungsanleitung

ProFusion

ProFusion PH-960 Bedienungsanleitung

ProFusion

ProFusion DQ1016A Bedienungsanleitung

ProFusion

ProFusion PH-9100WS Bedienungsanleitung

ProFusion

ProFusion GD9315BC1-N Bedienungsanleitung

ProFusion

ProFusion HA11-20M Bedienungsanleitung

ProFusion

ProFusion FH128B Bedienungsanleitung

ProFusion

ProFusion Salamander PS-10241P Bedienungsanleitung

ProFusion

ProFusion Ceiling mounted utility heater Bedienungsanleitung

ProFusion

ProFusion PH-931 Bedienungsanleitung

ProFusion

ProFusion WH-50B Bedienungsanleitung

Beliebte Heizung Handbücher anderer Marken

oventrop

oventrop Regucor Series Bedienungsanleitung

Blaze King

Blaze King CLARITY CL2118.IPI.1 Bedienungsanleitung

ELMEKO

ELMEKO ML 150 Bedienungsanleitung

BN Thermic

BN Thermic 830T Bedienungsanleitung

KING

KING K Series Leitfaden

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Kurzanleitung

Well Straler

Well Straler RC-16B Bedienungsanleitung

EUROM

EUROM 333299 Bedienungsanleitung

Heylo

Heylo K 170 Bedienungsanleitung

Eterna

Eterna TR70W Bedienungsanleitung

Clarke

Clarke GRH15 Bedienungsanleitung

IRSAP

IRSAP The Radiator Company Ovali Bedienungsanleitung

Empire Heating Systems

Empire Heating Systems WCC65 Bedienungsanleitung

Wetekom

Wetekom 92 86 43 Bedienungsanleitung

Desa

Desa SPC170-F Bedienungsanleitung

Watlow

Watlow Watrod Electric Tubular Heaters Bedienungsanleitung

Haverland

Haverland ECO-DRY GPS Series Stücklistenhandbuch

Stelpro

Stelpro ASILVC2060 Series Bedienungsanleitung